To answer the question “Should I worry about electrical repairs in a new home?” we need to specify what new means. Was the house built recently? Or is it “new” because it is new to you, regardless of its age? In either case, there is a simple rule to follow: if you think you need electrical repairs, you probably do—no matter how old the house is. Always worry about electrical repairs if there are signs that you need them.

When you move into any home built more than 10 years ago, you should hire an electrician to check the system for problems. Despite surface appearances, a home may have wiring troubles from DIY repair attempts from a previous owner; you want to make sure there are no serious problems that need immediate repair to prevent safety hazards.

With a home built pre-1970, you may encounter difficulties from an electrical system that cannot support modern demands. Check on the outlets and the circuit breaker panel. If the home has two-prong outlets and a fuse box instead of a circuit breaker panel, you should have new installations done to upgrade the system. Otherwise you may end up with some major repair worries in the near future. Older circuit breaker panels are often not up to the task of contemporary power needs. If you experience frequent blown fuses or tripped breakers, have a repair technician investigate right away.

With a recently-built house, you shouldn’t have many concerns about your power needs: the home should have sufficient wiring, updated GFCI outlets, and a new circuit breaker panel. However, you can’t simply go lax about small signs of difficulties or indications of improper electrical installation. Look for flickering lights that indicate small power surges. Although these rarely trip circuit breakers, they can cause damage to appliances over time. Call for a repair technician to see if your new home will benefit from a whole-house surge protector.

Check around your ceiling fixtures on occasion to see if they are growing hot. This indicates poor electrical insulation and sometimes occurs in new homes due to poor installation. If you detect poor electrical installation problems in one place in your home, they probably exist elsewhere; call for an electrician to examine your home’s electrical system thoroughly for faults.

However, choosing a ceiling fan can be a sometimes difficult endeavor. Knowing what size fan would fit your room, the ideal style, what type of lighting you’ll need, the features the fan contains and staying within your budget can all be a bit of a challenge. We understand that it can be a challenge, so 1800Lighting is here to help; this is the ultimate buyer’s guide for selecting the perfect ceiling fan for almost any need.

On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

The electrical installations in our home are something we take for granted, until the time some problem arises; that’s when we realise exactly how dependent we are on electricity on a daily basis. And when something goes wrong, you start looking for an electrical company that will respond promptly and solve the problem quickly.

You will find a multitude of electrical companies listed online. However, identifying one that is credible and provides quick, efficient and cost-effective services can pose a challenge. It’s important that you be prudent while hiring an electrical contractor.

The one way to be sure you are dealing with expert professionals is to do a bit of groundwork. This means you won’t have to struggle to look for a reliable electrician in case an electrical emergency arises. Here are a few tips that will help you choose a trusted and professional electrician:

This is a very important aspect you should be taking into account. The company you hire should be local to your area. You can never predict when an electrical emergency would arise, and you need to be sure that the electrician will be able to reach your location as quickly as possible.

There are a number one-man electrical businesses in Sydney and many of these electricians are experienced and highly-skilled too. However, if they are already handling some job when you call, they won’t be able to attend to your requirement quickly. The one way to avoid this kind of a situation is to hire the services of a larger company. These companies deploy their vehicles to different locations within their service area.

When you call them, they promptly contact one of their electricians that are in the vicinity of your location and send them over to attend to your request. Even as you look for a contractor, keep in view that a very large company may not be able to provide you personalised services and customised solutions. It’s important to choose a company that would be able to cater to your specific needs.

There are a number of different electrical services you may need, ranging from something as simple as getting a fan installed to more complex jobs like complete rewiring upgrades on your property. Only experienced and well-trained professionals would be able to handle all these jobs with expertise. The company you contact should have experienced electricians on their team and should invest in upgrade training for them; that’s the one way the electricians would be able to keep their skills sharp.

Look for a company that’s professional and efficient. Electrical problems have a way of throwing things out of gear. The electrician that comes to fix it should be able to quickly identify what the problem is and fix it expertly and quickly. They should work in an unobtrusive manner and focus on reducing the downtime caused by the electrical issue.

Only a credible and well-established company will make efforts to maintain complete transparency in their dealings with their clients. They should provide a detailed quote and look to provide you value for money. Only a company that’s confident of their workmanship and quality of services will provide guarantees for their work.

We are a reputed and experienced company that is focused on providing high-quality solutions at competitive pricing. For any information about our services, feel free to call Allround Electrical at 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

A common lighting technology in the commercial space is metal halide, at least in the past it was. At an ever increasing rate, businesses are actively searching for a more efficient lighting system that will allow them to cut energy consumption and in turn; reduce overhead expenses.

When companies or facility managers start their search, they often search for the wrong answer. Here are some common questions that we are asked:

“How many watts does it take to replace a 1000w metal halide light?”

“How can I replace my metal halide light?”

“Is it even possible to replace my metal halide fixture with another technology?”

This post specifically will be covering the first question, as for the other two: be sure to subscribe to our email list to know when new posts go live, we are always pushing out informational content to answer your questions just like these ones!

So.. How many watts does it take to replace a 1000 watt metal halide fixture?

It’s simple a simple concept, yet not at the same time. In short, it’s impossible to know just from that question alone. The reason for this is simple too: you can’t base your decisions off of watts alone. Instead, you need to be basing your decisions off of lumens.

What is a LED equivalent to a 1000w metal halide you can easily find fixtures that output at over 100+ lumens / watt. Especially when you go with quality products from reputable companies, you can reach higher than a 150 l/w output. This will allow you to cut your wattage usage per fixture by 2-3 and sometimes 4 times which will prove to save substantial amounts of energy when you start talking about replacing multiple fixtures.

So we’ve explained what it takes to replace your 1000w metal halide fixture, but what does “replacing” consist of?

Replacing can consist of two things: write in to one of our professionals with your questions.