Christmas is just around the corner, and many families are decorating their homes. During the holiday season, when the sun sets early, decorative lights along the streets and homes can bring a sense of warmth during the cold and dark evenings. When decorating your home, take extra precautions so that your lighting installation is safe from electrical hazards.

Ensure light bulbs don’t come in contact with flammable items (i.e. paper, cloth). Over time bulbs can generate heat and transfer this heat into nearby material that can lead to a fire. Although decorations look beautiful lying atop Christmas cloth, keep an eye on them if the lights are to be left on for a significant amount of time.

With this same issue in mind, don’t leave any lights unattended in the home. If you are leaving a room for an extended period of time, unplug the lights. Should a fire start, and no one is nearby to address it quickly, you could risk losing more than just a Christmas tree.

When hanging your lights do not use nails or staples that can penetrate the wires. If the protecting rubber and plastic is pierced, the exposed wires can lead to an electrical fire. The heat from the wires can heat up surrounding material and moisture exposure can cause sparks.

Ensure your lights are rated for outdoor use should they be used on the outside of your home. Some lights tend to be more delicate and not weatherproofed and are intended for indoor use only. Should it rain or snow, you may find it necessary to replace all the lights on the exterior of your home.

Once the holiday season has come to an end, take down the lights. Christmas decorations and lights are not designed to be exposed to the elements 365 days a year. After an extended period of harsh weather and temperature fluctuations, wires can deteriorate. This means that you could risk an electrical fire if you do not replace the lights. Saving time and effort by leaving your lights up year-long can cost you money.

When connecting strands of lights, check each connection carefully so that it is tight and secure. The connection prongs can become exposed during wind gusts. If they are already exposed you can risk experiencing electrical surges when exposed elements come in contact with the elements.

You also want to avoid overloading power outlets and extension cords. Too many strands attached to the same extension cord, or chained extension cords can be dangerous. A good rule of thumb is to limit the strand length to no more than three chains of lights.

The Christmas season can be warm and inviting, but without the proper precautions you can risk losing more than just a few presents under the tree. Take some extra time when decorating this season to ensure that your family and home are protected. For more information or for a help from a licensed electrician, contact your local Expert Electric at 604-681-8338.

The electrical enclosures may be one of the simplest electrical components but it is important that you design it properly. While it may be a simple component to specify, the extensive choices available in the market might overwhelm or confuse you. The most obvious choice might not always be the best in terms of reliability and long-term profitability. At the same time there may be under-rated choices that might turn out be great buys.

Let’s see how to approach enclosure design.

Critical Design Aspects to Keep in Mind

• Material Selection

Plastic or metal are the most popular choices. These groups can be further categorized into polycarbonate, ABS, aluminumpolystyrene, steel or cast iron. Select the material that can withstand the surrounding conditions of the location it will be installed in. Understand your needs and make a decision accordingly.

• Internal Design & Size of Enclosure

Consider the internal design of the enclosure. The design must meet with your requirements. Note the internal and external dimensions to make better use of the space inside, for housing your component. It is also important to take mounting options into account.

• Choosing the Right Metal

Popular choices include:

It’s no secret that incandescent lights are on their way out—they’re incredibly wasteful, have relatively short lifespans, and are much better at producing heat than light. This leaves us with two alternatives: LED and CFL bulbs. And while CFL bulbs have been steadily gaining traction in many homes in our area over the last several years, some experts see them as little more than a stopgap measure before LED lights become more commercially viable. So what’s the real story? Should you go out and buy up all the CFL bulbs before they’re phased out or should you hold out for LEDs?

The US Department of Energy put together an extremely thorough, 50-page analysis comparing LED and CFL bulbs, which we definitely recommend checking out if you’re interested. In our comparison, we’ll be looking at the following aspects of CFL and LED bulbs:

Note: unless otherwise noted, our comparisons are based on using 30 bulbs simultaneously. So without further ado, let’s take a look at what distinguishes CFL and LED bulbs and which you should install in your home:

Thanks to DesignRecycleInc.com for the information in this chart!

Based on the chart, the clear winner seems to be LED bulbs. And it gets even better—Phillips is expected to release a new LED bulb that gets 200 lumens/watt, more than twice as good as the best LED on the market today. If that bulb performs as expected, it could allow LEDs to declare a decisive victory over other options.

If you’re interested in learning more about the benefits of LED lights, don’t wait—call Kolb Electric today!

There has been a sea change in electrical safety systems for residential and commercial properties and these systems are significantly safer than the ones that existed even up until 5 years ago. Even if you have new installations on your property, you need to make some effort to prevent electrical accidents.

This means you have to ensure that the electrical infrastructure in your home is of a high-grade and that it’s well-maintained. It’s also important to make smart choices with reference to using various heat-producing appliances and extension cords. Here are some tips that will help make your home a safer space:

Electrical safety is about ensuring that every fixture, fitting and installation is updated and in a good condition. The power points are one of the most important electrical components on your property. Since these are the ones you come in contact with very regularly, they do become worn and damaged sooner than the other parts of the system.