It’s important for your daily convenience and safety that your home’s wiring remain in excellent condition. At the first signs of trouble in the wires, you need to call for trained electricians to come to your home, track down the source of the problem, and safely repair it. Do not attempt to troubleshoot the electrical issues yourself, since you will risk a high voltage shock. (In some areas, it’s illegal for anyone who doesn’t have proper certification to work on high-voltage wiring.)

We need to emphasize once again that you should leave the electrical repairs to electricians. You not only risk injuring yourself with amateur repair work, you could start a fire in your house. Play it safe and cautious, and call for experts to handle the task.

When problems like this occur in an older home, you should consider upgrading your wiring or upgrading your circuit panel. This will make your house safer and make it easier to add more powerful modern appliances without causing shorts.

During a lightning storm, the safest place to be is indoors. However, there are still several safety precautions one needs to take to stay safe in your own home. The three most common ways lightning can enter your home are through a direct strike, through inner/outer wires and pipes, and through the ground.

To know how at risk your home is during a storm, you can use a guideline that meteorologists call “The 30-30 Rule.” If you see lightning and then hear thunder within 30 seconds, move indoors and take necessary safety precautions. This typically indicates that a storm is fewer than 6 miles away, which is close enough for a lightning strike. Then, stay indoors for at least 30 minutes after you hear the last clap of thunder at the end of the storm.

The following guidelines can give you additional protection against electrical injuries during harsh, stormy weather:

Injuries caused by lightning strikes are more common than most people realize, but the above considerations and safety guidelines can help secure both you and your home during inclement weather.

Saffron’s Drift Light is here to help. The Drift Light is like a normalAmanda Kooser reviewed the Drift Light earlier in the month. Kooser reports that during the first night, she was highly aware of the way the light was dimming, but during the next few nights, she never caught the light turning off because she was already asleep. As somone who claims to have “notorious” sleeping troubles, this would imply that the Drift Light works pretty well.

Kooser says that since you know the LED light bulb will dim over the course of 37 minutes, it’s easy to plan for the light to turn off around the time you want to fall asleep. The most compelling statement Kooser makes about the Drift Light: “There is something soothing about the world dimming around you. It’s like being a kid with an early bedtime, sensing the sun set outside your window.”

I’m interested to see if this product will become popular. Have you ever tried anything like this to improve your sleeping habits? Leave a comment, and let us know!

Fun Fact: “Americans might not have a Columbus Day if Christopher Columbus had not been born in Italy. Out of pride for their native son, the Italian population of New York City organized the first celebration of the discovery of America on October 12, 1866.” *

Although declared a federal holiday in 1937 by President Franklin Roosevelt, Columbus Day is not celebrated in California, Nevada or Hawaii. Controversy over the “discovery” of America exists because native people inhabited the land prior to the arrival of the Europeans. **

While the “discovery” of America may be in question, there is no doubt that the European influence and influx of cultural diversity is worth illuminating. And, some of the most outstanding home lighting concepts incorporate Old World artistry with New World technology.

DISCOVER THE UNDENIABLE BRILLIANCE OF EUROFASE LIGHTING:

Established in 1989, Eurofase enters its third decade of excellence with cutting edge contemporary lighting and classic, traditionally-inspired designs.

From Gothic wrought iron chandeliers and grand crystal foyer fixtures to modern “green” lighting and energy-efficient outdoor lighting, Eurofase demonstrates a close attention to detail, embracing technology and a fusion of creative energy.

EUROFASE: WHERE OLD WORLD ELEGANCE MEETS THE HIGHEST STANDARDS OF MODERN QUALITY CONTROL…

Headquartered in Toronto, a city rich in inspiration and cultural diversity, Eurofase’s inventory of over 2,600 unique products is controlled by state-of-the-art technology with world-class accuracy.

A Quality Control team overseas the mechanical and electrical integrity of every Eurofase product.

A stringent control process ensures that all crucial elements-such as safety approvals, longevity testing, packaging and instructions-meet the highest standards.

With an in-house UL (Underwriter Laboratories) Standards Testing Lab, Eurofase independently monitors the safety approval process.

Eurofase Lighting is credited with introducing several new designer and technological trends to the North American marketplace….

Visit a Capitol Lighting showroom or shop 1800lighting.com to view these sensational collections and enjoy promotional pricing on profound illuminations from Eurofase.

Also, this week enjoy Columbus Day savings on award-winning Hinkley Lighting. Winner of the “Lighting for Tomorrow” 2012 award, Hinkley Lighting offers outstanding energy-efficient outdoor lighting, as well as, superb chandeliers, ceiling fixtures, wall sconces and bath lighting for the distinguished home.

Discover great discounts at Capitol Lighting…take 30% off ALL new bath and outdoor fixtures now through November 1st!  From pendant lights and chandeliers by   Eurofase to gorgeous outdoor fixtures by Hinkley Lighting, Capitol Lighting carries the best brands and products to light your home with distinction and style.

*www.usafederalholidays.com/Columbus_day.html

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!