Without proper lighting, the details in your furniture and artwork at first sight go unnoticed. Careful lighting design gives dimension and texture, revealing the articulacy of your home décor. Creating the proper lighting setup lies in finding the correct spacing, fixtures and functions for each room. Every lighting technique brings you closer to customization and works together to establish a healthy balance between posh and practicality.

Consider adding toe kick lighting under the counters of your kitchen or bathroom to balance light between the ceiling and floor. It’s subtle yet useful, and provides an extra cushion of safety. Toe kick lighting arrangements also bring depth to unlikely spaces.

Don’t neglect the nooks and crannies of your home; light them up. Take advantage of layering through the use of key, task and accent lighting. Key lighting will provide basic light function overhead. If used alone, it will provide flat, uninteresting light.

Reading lamps are the perfect approach to task lighting and can be placed on your bedside table or next to your favorite lounge chair. And, accent lighting gives the finishing touch. It highlights details that slip under the radar if left in the dark. Add accent lights to illuminate intricate artwork, plants, cabinet silhouettes and wall textures.

LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, it’s extremely important that you make sure everything is up to code. Some code violations are illegal, others can be dangerous—some are both!

Wiring mistakes – most wiring mistakes are made by handymen doing electrical work instead of certified electricians. Among the worst we’ve seen are electrical systems that were hooked up using extension cords instead of dedicated electrical wires!

Overcrowding with too many wires – overcrowding is another sign of a contractor who didn’t know quite what they were doing. Since poorly maintained wires can get hot, any place where there are masses of wires packed tightly together can create a major fire hazard.

Exposed wires or junction boxes – frayed or exposed wires can pose a major electrical safety hazard and should be either replaced or patched up. And while junction boxes should be within reach, they should not be so easily accessible that they can accidentally be touched.

Ground Fault Interrupters (GFI) outlets or breakers not working properly – GFI outlets are especially important for the kitchen, bathroom, and anywhere else where water or humidity could create an electric shock risk. If these outlets are not working properly, you could be in danger without even realizing it!

Mixing line- and low-voltage wires together – the National Electric Code (NEC) expressly forbids this, but we often see it, especially when dealing with HVAC installations.

Light fixture or ceiling fan installed without a junction box – junction boxes are required to be installed so they are always accessible and are used to run multiple conductors in two or more directors. The most common problem we see is junction boxes installed out of reach in a concealed wall or ceiling space.

Missing or damaged switch and outlet covers – plate covers on switches and outlets are important for preventing electric shocks. If you’ve recently painted or remodeled the room, you may have taken the covers off. Make sure you put them back on!

Damaged outlets – damaged outlets can cause appliances and anything plugged into the outlet to malfunction and can also create a major fire risk.

These days, many home sellers are seeing the value of having an electrical inspection prior to putting their home on the market. Having the ability to correct any electrical code violations ahead of time may help in avoiding delays in the negotiation and sales transaction.

If you’re planning on selling your home in Maryland, Virginia, or Washington, DC, call Kolb Electric! We can perform an electrical inspection and make any necessary electrical code corrections. Don’t wait—call us today!

Want to improve your yard? One of the easiest ways to make it more beautiful is to add outdoor lighting. These multi-functional decorations can both help brighten your property and let you use it round-the-clock and make it even more beautiful by adding some soft, highlighting illumination. While outdoor lighting used to involve substantial work, including running bulky and often-ugly electrical runs, today’s homeowners have a number of new technologies that can safely and permanently run electricity without breaking their bank or compromising on beauty. Here are a few of the great options available to homeowners today.

LED lights are more affordable than ever before, and come in a massive range of styles, colors, and can be utilized for nearly any purposes. Perhaps the best part about them is that they are so small that they use very little electricity, while still offering a considerable amount of light.

LED lights come in many different forms, including spotlights, rope lights, or individual bulbs, meaning you can apply them almost anywhere. Looking to illuminate your deck? Run a few strands of LED bulbs across the top for a mood-setting glow. Want to highlight the beauty of your garden? Install a few lights around your prized plants. The possibilities for installing LED lights are endless.

Pools have had lights for many years, but a modern pool light offers extra options that were never available before. Turn the water in your pool or hot tub a fun color, or cycle through different colors quickly with color-changing bulbs. Additionally, modern pool lights need far less electricity to run and can offer even brighter solutions than ever before. Plus, a pool light can help you stay safe at night by making sure you see the water at all times.

Pathway lights can offer a lovely dressing for your existing paths as well as help you avoid any potential trip hazards. If kids leave toys out on the path, you can avoid these obstacles with a few simple pathway lights. Some models of pathway lights are even solar powered, gathering sunlight during the day to power themselves and then turning on at night with a subtle glow.

Security lights can help shine light in pivotal spots of your home during darkness hours, such as near front-facing windows or your front door. Many of these lights are motion-activated and require very little work to install, but can flood an area with bright light to help you spot and keep away potential intruders. Other types of security lights stay on all night long and offer you the peace of mind of knowing your home is not shrouded in darkness that encourages illegal activity.