GFCI stands for ground fault circuit interrupters. This specific type of outlet can help prevent most electrocutions, and are even required in homes near sinks such as those in the kitchen or bathroom. GFCI outlets measure the current flowing out of the outlet and back. If the values vary, even slightly, the outlet with shut down any transfer of electricity. This has saved thousands of lives over the last 40 years. It’s very easy and quick to have an electrician go through your home and replace standard outlets with life-saving GFCI outlets.

If you’ve ever had children, you know how important outlet covers are in the home. While they may not be necessary all the time in a home with only adults, there are many other reasons besides children that these covers come in handy. Outlet covers are simply pieces of plastic that fit into outlets to protect anything from making contact with the available electric current. These covers protect children from putting their fingers in outlets, dogs and cats from licking them, and help prevent the rare accident as well. Pick some up at your local hardware store.

If you’ve ever opened up a light switch panel, you’ve probably seen simple situations that have three wires. One wire is the hot wire which carries electricity to the outlet. The other hot wire is only hot when the switch is activated and carries the electricity to a light or appliance. The third wire is the ground wire. More often than not, especially in older houses, this third ground wire may not be attached to anything. It’s important to make sure this ground wire is properly installed to the switch to avoid things shorting out or electrical fires.

Perhaps your house was originally built without air conditioning or you have added a full laundry room onto your home that wasn’t there when the house was built. If that’s the case, you may have outgrown your home’s electrical panel without realizing it. Adding high energy use appliances can easy place an extra toll on your electrical panel. The best way to know this is if your lights flicker when you start an appliance or you have a breaker regularly flip. It’s time to call an electrician if you think this may be the case.

Power overloads are one of the many scenarios an emergency electrician can help a homeowner address and prevent. In the event of an electrical emergency like a power overload, which can be the result of faulty wiring, only a qualified emergency electrician will be thorough enough to find the problem, repair it and help you avoid it in the future.

Overloads, though seemingly minor issues, are, in fact,  one of the most overlooked and dangerous problems you can have with your electrical system. An overload can cause everything from electrical shorts to fires. What’s more, a power overload is one of the most avoidable electrical problems—you don’t have to let it get to the point of electrical emergency.

What is an Overload and What are the Causes?

During a power overload, the circuit gets overwhelmed and shuts itself off. It’s a common occurrence in many homes. For instance, you could have the microwave, a rice cooker and a stove running off the same circuit in your kitchen when you suddenly notice that your power goes out in the kitchen while it stays on in the rest of the house. Then you check the breakers and realize that the breaker wasn’t tripped.

Because they see things like this all the time, licensed electricians can easily identify the source of the trouble. There are generally three main causes of power overloads.

 Power overloads are preventable with a little thought and planning. When ignored, however, they can result in very costly repairs—or worse.

 Electric Man: Emergency Electrician to the Rescue

Are you experiencing a power overload or another issue that requires an electrical troubleshoot? Electric Man’s emergency electrician crew is available 24 hours a day, 7 days a week to respond to your electrical emergency. Give us a call today at 972-792-7270 to learn more about our emergency electrician services. You can also connect with us on any of our social networks!

Whenever you have a short circuit, it means that there was an accidental path created in your existing circuit, which generated a connection that was not there before the short occurred. Electricity will always follow the path of least resistance, which means that it will almost always follow this new path, rather than its intended path. This typically results in an abnormally high level of electrical current. The most common type of short is when two bare wires cross, such as when old insulation deteriorates, causing a loose connection which allows two wires to touch.

An electrical short is not something to take lightly. This increased current generates a great amount of heat, which can lead to sparks and fire. One way to identify an electrical short is by hearing a popping sound whenever that particular circuit is turned on. This is the sound of the electricity taking the path along the new connection that it has found, causing the circuit to experience a sudden overload. Smoke, flames and melting fixtures can follow, leading to larger fires and risk of shock in the immediate vicinity.

Another common source of electrical shorts is improper wiring. This can occur if the metal lining of a particular switch or outlet touches one of the wires. An electrician in Burbank must always find and fix shorts caused by damage, such as storm damage.

The most important thing to do whenever you have a short is to address it immediately. Because of the potential severity of this situation, call an electrician right away to have them inspect and fix the problem for you. A short left unrepaired can lead to more extensive damage, resulting in a much higher cost than if you had fixed the problem whenever it was first detected. For more information on electrical troubleshooting and our services, visit our main page (Click Here).