The electrical system in your home is its most vital component, more so than its gas and plumbing. Without electricity, most basic tasks during the day are impossible—and they become worse than impossible at night. If you have an electrical system that is suffering from repair needs, you can’t wait for a full power loss before calling for repairs. Watch for the warning indicators listed below that will tell you to contact a licensed and experienced electrician immediately.

Call us for these services or for electrical system repairs in Mill Creek, WA.

Low Voltage Track and Rail Lighting Systems for 2013

Your Guide to Outstanding Low Voltage Lighting Installation 2013

You cannot beat the versatility and design of innovative low-voltage track and rail lighting systems.  New compositions and energy-efficient options are extraordinary and may be custom-designed to blend seamlessly with changes in your decorative environment.

Far from the industrial-sized straight runs and bulky fixture heads of the past, new track and rail lighting systems are elegant and balanced to beautifully illuminate both traditional and modern settings.

Top 5 Reasons to Update with Low Voltage Lighting Systems

1.  More Economical:  Because low voltage lighting systems function on 12 volts of electricity rather than the standard 120 volts, low voltage lighting uses less energy, and smaller low voltage track heads deliver light more efficiently.

2.  Easy installation: From colorful and vibrant glass pendants to sleek metallic spot light fixtures, track and rail systems are easy to install and maintain. The monorail system is the most basic and easiest to install; consisting of a single line of electrical cable that may be installed in straight runs or custom designed in a unique configuration.

3.  Safer Operation:  Low voltage lighting requires a transformer to “step down” the 120-volt standard to a 12-volt system; and, the reduced 12-volt system eliminates the risk of electrical shock.  Because of the reduced risk of electrical shock and safer operation, low voltage lighting may incur fewer required inspections.

4.  Greater Flexibility:  Unlike other ceiling fixtures where a lighting design in required before you begin construction, low voltage track and rail lighting systems provide the flexibility to update your home lighting design as you can afford. You may choose to do one segment at a time, and add to the design as your needs and budget allow.

5.  Superlative Lighting Designs: Low voltage track heads and light fixtures are available in a myriad of styles and sizes.  They are made to accommodate compact light sources that are as bright as 120-volt bulbs but in a smaller fixture. Most of the bulbs used in low voltage lighting are more than twice as bright as regular incandescent bulbs of the same wattage.

FAQ’s

HOW MUCH WILL IT COST?

-The cost to install low voltage lighting currently runs on average between $150-$220 per fixture.  Material and labor costs vary according to hourly labor wage restrictions, specific project size and the number of fixtures needed.  It is a good idea to get a few estimates before hiring an electrical contractor for your low-voltage lighting installation.  Estimated costs should include all materials, as well as delivery charges for equipment and costs to prepare, protect or repair existing structures. (Permit and inspection fees are usually additional charges that may be involved with certain lighting installations.)

-Low voltage track and rail lights operate on a system equipped with a transformer. Since standard lighting installations run on outlet and junction boxes that provide 120 volts of electricity (in the US and Canada), the transformer serves to “step-down” or decrease the voltage from standard line voltage (120 volts) to low voltage (12 volts).

-Low voltage fixtures, bulbs and dimmers are generally more expensive than line voltage systems due to the transformers that are included as part of the fixture’s electrical construction; Although low voltage installations may be more expensive than line voltage systems, lifetime operating costs are lower due to energy savings and lower maintenance costs.

WHAT TYPE OF LIGHT SOURCE WORKS BEST IN A LOW VOLTAGE TRACK HEAD?

-Although there are some good compact fluorescent lamps that may be used in low voltage track fixtures, halogen bulbs are still the most popular choice.

-Low voltage halogen lamps contain filaments that are shorter and fatter, so the illumination is precise, crisp and luxuriant.  These lamps are available in a variety of beam spreads offering over 20 variations in any given wattage, ranging from super narrow spot lights to full-spectrum flood lights.

-The most common lamps or light sources used in low voltage track heads are PAR 36 and MR 16 halogen light bulbs.

CAN I UPGRADE MY TRACK FIXTURES WITH LED (LIGHT EMITTING DIODE) LAMPS?

-LED (light emitting diode) low voltage lamps are compact solid-state light sources that provide cool focused task light.  LEDs last 10,000-100,000 hours and use very little electricity.  With future production, LED lamps may become more affordable and the standard go-to choice in track and rail systems.  *Rather than a transformer, LED bulbs require a “driver” to convert from standard to low-voltage.

 With a state-of-the art low voltage system, you may custom design formations with imagination and creativity and the possibilities are endless…

-Use straight runs of track to highlight displays in a gallery or down a corridor.

-Make a design statement and provide the perfect task light with hand-painted low voltage pendant lights over kitchen islands, bath vanities or night tables.

-Highlight the sparkle in crystal and provide accent light to an elegantly set table with low voltage rail lighting.

-Expand your space with hand-bendable rail fit to accommodate rooms with limited ceiling space or rooms where electrical junction boxes are  inconveniently located. The beauty of track is that it may be custom measured and easily cut to fit your exact specifications.

*Especially suitable for savvy renovation projects, such as older New York City apartments that may have one junction box in the ceiling:  Track and rail lighting configurations can do it all, providing general, task and accent lighting.

-Track lighting systems are even being used to power residential garage space with functional and inviting illumination; Showcase expensive automobiles and provide excellent task lighting to a workbench or hobby station with streamlined track lighting.

Low Voltage Track Systems from Start to Finish

GETTING ON BOARD: YOUR TRACK  7-STEP SYSTEM

-Although, electrically-speaking, track runs must work as separate units, multiple track and rail layouts may be connected to appear as one system.  An isolating connector is used to power each section.

-A floating canopy connector may be installed anywhere along the track and covers a junction box while providing power to the system.

-A live end connector may be used if you are running wires directly into the track without using a junction box.

-You may also power the system at any connecting point (straight, angled, T-junction, etc.) where the connector has a power feed entry point.

-A junction box may also be used at any of these power entry points; a canopy cover plate should cover the entry points for aesthetic, as well as safety reasons.

Basic guidelines to ensure safety and effortless performance of low voltage track heads:

-Most track and rail systems are installed directly into the ceiling and mounting hardware should be included.

-Systems that are suspended from the ceiling require adaptable suspension hardware.

-Low voltage track heads are made to slide directly onto the track and repositioned easily.  End caps should be included in the installation for a clean finish.

-Low voltage track fixtures may be placed on line voltage track systems by using a track connector with a transformer installed to lower the voltage of the track system.

-Voltage drop:  On longer track runs, you may notice a decrease in brightness the farther away the low-voltage head is located from the transformer.  With remote transformers, voltage drop is dependent on the number of fixtures on a system, the length of track, and the length and gauge of wire from the transformer to the power feed.

– Be sure to mix and match fixtures within the same systems; check for compatibility when trying to interchange fixtures from different track and rail systems.

-PAR bulbs and MR16 low-voltage halogen are available in a variety of beam spreads.  Wide-angle bulbs are great for general illumination; narrow spotlights are good for task and accent lighting.  Track head accessories and special lenses may be added for increased directional and colorful effects.

Track or rail systems allow you to create an original lighting design to perfectly illuminate your home. Capitol Lighting offers track and rail lighting systems, accessories and compatible light fixtures from top brands like LBL Lighting, WAC Lighting, Kichler Lighting, Tech Lighting and Wilmette Lighting.

Top Pics include:

TECH LIGHTING MONORAIL 

Low voltage track and rail systems that twirl, bend and twist are available in choice finishes.

‘

EUROFASE Cable Lighting

Energy-efficient 4-light Design Pro LED Rail Lights from Kichler accommodate installation on the wall or ceiling.  They are fully dimmable and Energy Star-rated.

Industrial-inspired head with proprietary 5.8 watt LED module. It is easily field upgradeable and replaceable similar to a medium-base socket, though it utilizes a dedicated base. The heat sink remains with the fixture minimizing any waste at the end of life. Rotates 360°, pivots 90°.

“Clamps to Wall MonoRail. 18″” long with 3″” high gentle curve. Pivots at head to direct beam. Low-voltage, MR16 lamp of up to 75 watts not included). For Wall MonoRail system only.”

With the latest track and rail lighting innovations, the flexibility to redecorate with light is intrinsic. Adjust your lighting design with ease by adding new track segments or repositioning adjustable fixture heads.  Transform your guest room into a nursery with whimsical designer pendants or upgrade your hallway with sleek metallic low voltage track heads.

Low voltage track and rail lighting fixtures are brilliantly engineered to adapt to modifications in your décor and furniture placement; lighting may be reconfigured and beam spreads refocused to highlight artwork and illuminate your home safely and purposefully to bring out the best in a new design scheme.

Snap! Crackle! Pop! These are great sounds if you’re crunching cereal or curling up in front of a roaring fireplace on a cool winter evening. However, they are definitely unwelcome if you have just flipped on an electric light switch in your Los Angeles home. While most people can do simple home repairs, electrical problems are much more difficult — and potentially dangerous. At times like this, you’ll need to call on a Los Angeles electrician.

Since 1979 the Electric Connection has been providing electrical service and electrical repairs locally as an electrician in Los Angeles and the surrounding communities. But they offer an additional, very unique electrical service; they are willing to answer your electrical questions and give free electrical advice to homeowners who have questions about their home lighting, electrical rewiring, electrical safety assessments, electrical upgrades, or any other electrical concern. In a way it’s like having your own personal electrician in Los Angeles who will share bits of wisdom and electrical trade advice without charging for an unnecessary electrical service call.

Here’s an example of the kind of electrical help that’s available on The Electric Connection’s website. Suppose a short circuit causes your circuit breaker to flip off. Do you have an electrical wiring issue? Is the circuit breaker overloaded? Is the breaker broken? This Los Angeles electrician’s site walks you through some steps you can take to isolate the problem at no fee. They suggest you think back to what happened immediately before the electrical power went out. For example, if you just plugged in an iron or other appliance immediately prior to the circuit breaker jumping off, unplug the appliance and reset the circuit breaker. If it stays on without any additional electrical power interruptions, the problem is most likely a faulty appliance and not an electrical issue at all.

On the other hand, if the circuit breaker does not work normally, or if you can’t find any specific cause for the break in your electrical power, then it may be time to call a licensed electrician in Los Angeles CA. Everything wears out over time, even circuit breakers, and you may simply need to have yours replaced. Another possibility is that the electrical wiring in your house is not sufficient for the amount of electrical appliances you now have. This situation frequently occurs in older homes which were built before the age of multiple televisions, home computers, entertainment centers, trash compactors and more. In this situation a Los Angeles electrician can add additional electrical wiring to your home or upgrade your electrical panel, bringing it up to speed with today’s highly powered lifestyle.

The Electric Connection’s website is full of other little hints that can help the do-it-yourself homeowner. For example, do you want to change out that old dining room light fixture with a more romantic chandelier that is hooked up to a nice dimmer switch? If so, read the advice on the Electric Connection site to make certain you purchase the correct electrical switch. Do you have flickering lights or electrical outlets that fail to work? The Electric Connection, your Los Angeles electrician, will tell you all of the possible reasons for your problem.

They are also willing to explain things such as the recent electrical upgrades to the National Electric Code that requires special outlets called ground fault circuit interrupters (GFIs) to be installed in electrical outlets which are near water sources, like the bath, kitchen, garage, pool or hot tub. These inexpensive electrical upgrades can be a lifesaver – literally!

Things wear out, including electrical wiring, and codes continually change as improved materials and safety features become available. Do you know the state of our home’s electrical health? If not, you may want to contact a licensed electrician in Los Angeles CA to conduct a free, no-obligation safety check. Your home is not only one of your largest financial investments, but it’s the place of safety you provide your family. Take a little time to give your home a checkup.

When you’re looking on line for electrician Los Angeles, you’ll you can always call The Electric Connection to discuss your electrical projects, to ask any electrical related questions, or to inquire about an electrical estimate.

The kitchen is one of the busiest and most heavily-used rooms in your home. When it comes to fires, it’s also perhaps the most dangerous. With various fluids being used, such as oils and water, along with electrical appliances, heat sources, and more, it doesn’t take much for a simple mistake to lead to a potentially devastating blaze suddenly bursting to life. When it comes to kitchen safety, knowledge and care can go a long way, as can preparation should a fire ever start. Check out these valuable tips for learning how to avoid electrical fires in the kitchen and how to deal with one that starts.

The kitchen frequently uses water, oils, greases, and other substances alongside electricity in numerous situations. Your appliances all likely run on electricity, including your refrigerator, garbage disposal, dishwasher, and possibly even your stove and oven. While most of these devices are designed to keep all potentially-sensitive electronics away from any possibly damaging fluids, you likely still have exposed electrical plugs, extension cords, and more running along your countertops.

It doesn’t take much for a kitchen fire to start. Perhaps the most common type is a grease fire. If you ever work with hot oil on the stovetop, you’re probably well aware of how dangerous this substance is. In addition to having an extremely high burn risk, a single spark could cause a grease or oil source to quickly ignite, becoming a massive and difficult to deal with ordeal. This means you should be extremely cautious when using electricity to cook. Regularly inspect your plugs and cords for any signs of wear or fraying, and you should immediately stop using a device if you find any exposed copper at all—the risk of a potential fire far outweighs the cost of replacing a broken appliance.

Your microwave is a particularly interesting appliance in that it reacts violently with any metal placed inside it. If you’re not paying attention, it’s not difficult to accidentally stick something that isn’t microwave-safe in there, and usually by the time you figure it out it’s already too late.

If a fire does erupt in your microwave, opening the door should NEVER be the first thing you do. Fires need oxygen to breathe, and opening the door allows the oxygen to get in quickly, allowing the fire to grow and spread, and your problem will only get worse. Instead, the first thing you should do is unplug the device if possible and allow the fire to suffocate itself and go out before opening the door. Before you do, be prepared to dial 911.

Putting out a fire in your kitchen is rarely as easy as throwing water on it. In fact, in most cases water actually makes the problem worse. If you have an electrical fire, throwing water on it will probably only encourage more sparking and increase the chances of injury by electrocution. If you have a grease fire, throwing water on it will only cause the grease to splatter and continue to burn, potentially spreading the fire further (after all, water and oil don’t mix).

If you have a grease fire in your kitchen, the best way to put it out is to smother it and deprive it of oxygen. If the fire is contained in a pan, the best way to smother it is to use a metal lid to cover the pan and cut off the oxygen supply. If you don’t have a metal lid, a large baking sheet will do the job. Just make sure you use oven mitts or some other form of hand protection when you finally remove it. If the fire spreads outside the pan, cover it with salt or baking soda to quickly and effectively put the fire out. These substances are made from non-flammable material, and will quickly cover and suffocate the fire from oxygen if applied properly. Electrical fires can generally be fought the same way, but you should always move to unplug the device first if possible. You don’t want to keep sending electricity through a short any longer than you have to.

Finally, every kitchen should have a fire extinguisher in it. If you don’t, pick up a small Class B or Class ABC unit from your local hardware store (they’re not very expensive). These devices are approved to fight grease and kitchen fires because the retardant they use is dry, thus meaning you won’t have to worry about splattering that you would otherwise face with a different type.