Most Maryland, Virginia, and DC homeowners pay little attention to their main electrical circuit panel until something goes wrong, such as a tripped circuit breaker. However, when the areas around your outlets have darkened and/or heat is coming off of your main circuit box, these can be indications that something is wrong with your wiring system even if the circuit breaker doesn’t trip.

Since there are more than 370,000 house fires in the U.S. each year, causing around 15,000 deaths and injuries, paying attention to your electrical panel is more than just a good idea; it’s essential. Catching issues like a hot circuit breaker early can not only help to keep you and your family safe, but can keep the cost of fixing the problem in check and prevent property damage.

There are a number of things that can cause your circuit breaker to give off heat. Some of the more common include:

Electrical work is too dangerous to work on yourself. It’s important to hire a licensed electrician to make sure your wiring is handled properly and safely.

Kolb Electric has the experienced, licensed electricians you need to keep your home and your family safe. If you have questions or concerns about a hot circuit breaker or other wiring issue in your home, call us for an evaluation. Our staff has experience in a variety of home wiring projects, from re-wiring an entire home to fixing loose electrical connections. We’ve been helping Maryland, Northern Virginia, and Washington, DC area homeowners with their electrical needs since 1925. Call us at 877 287-1179 to schedule an appointment today.

You only need to type a few words into a search engine to pull up numerous DIY guides for repairing and replacing electrical lighting outlets in your home. Just grab a screwdriver, pliers, and wire cutters and you’re set.

But hold on—do you really know what you’re doing? These DIY guides can be notoriously sketchy, and some depend on you knowing far more about electrical repair than you probably do. Because of the risk of electrical shock and bad wiring that can lead to fires, you should leave the outlet repairs to trained electricians. Outlet shorts and faults are a common cause for household fires (the Electrical Safety Foundation estimates electrical troubles account for 55,000 fires a year), so you should never take such chances.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions: