Do you find energy conservation confusing? You're not alone. According to a recent study, Americans are by-and-large misinformed about what household appliances consume the most electricity. As a result, homeowners who wish to cut down on the energy they use in their home electrical work might find themselves spending time and resources to improve efficiency in areas where they won't see big gains. Read on to learn more about where most of our energy goes and how you can get the biggest payback for your conservation efforts.

The Failings of Cognitive Accessibility

In general, Americans tend to overestimate the amount of power that is devoted to common home devices like computers, television and lighting, while underestimating the amount of energy that is consumed by bigger ticket items like heat, air conditioning and hot water heating. That's because we confuse the amount of time we spend actively using a specific device with how much power it uses.

“Consumers tend to use the frequency with which they think or interact with a given energy source as a proxy for its consumption,” Ohio State University psychology doctoral student Dan Schley, lead author of the study, said to the Washington Post. For example, someone who spends eight hours a day working on a computer might naturally be inclined to think that device is what's driving up the electricity bill.

How to Make Your Actions Count

However, it turns out that the energy consumed by common electronics is dwarfed by what goes into major appliances. According to the U.S. Department of Energy, a whopping 48 percent of energy in the average home goes toward heating and air conditioning. The hot water heater takes the next largest individual chunk, at 17.7 percent. The refrigerator uses 13.7 percent, with all other appliances and electronics accounting for about 21 percent of the total.

The upshot? If you really want to cut back on consumption in your home electrical work, you need to target the biggest guzzlers. That means making interventions like installing smart thermostats, turning down your water heater temperature and beefing up the insulation in your home. The simplest, most effective change that most families can make is to bump the thermostat down a few degrees in the winter and up a few degrees in the summer.

Don't Neglect the Small Stuff

That's not to say you should ignore simple behavioral changes that can save money in other areas of your home electrical work – things like unplugging devices when they aren't in use, installing energy efficient cable boxes, using the power-saving settings on your computer and turning off the lights when you aren't in the room. Just treat these items as the appetizers and desserts of your energy-saving strategy, rather than the main course.

If you need help identifying the largest loads on your home electrical work, arrange for a visit from an expert electrician today.

These days, computers exist in our homes in one form or another. In most instances, these complex devices are expensive and if they get damaged in any way that can make you feel frustrated and getting them fixed can be an expensive proposition. Computers require electricity to function and even devices such as laptops, iPads and other tablets that operate on batteries have to be charged at one or the other time. Improper function and use can result in major electrical-related damage to your expensive equipment. Here are a few tips to maintain computer electrical safety in your home:

In one of our past blogs we have discussed in a detailed manner about the GFCI outlet, it helps protect your electrical devices like computers from power surges. In case of an electrical storm, or an electrical surge due to a problem in the electrical system, you can rest easy knowing that it won’t affect your devices.

The best Dallas electrician works with everything from large home electrical installations to installations as simple as switches. One popular install for the best Dallas electrician is dimmer switches, which are a favorite in many homes, both for their energy-friendly operation and their style.

Dimmer Switches: Why Install Them in Your Home

Dimmer switches are an inexpensive item that many homeowners love to add to their electrical setup at home for many reasons.

Dimmers save power, decreasing energy usage significantly and resulting in a lower power bill.

They set the mood and a unique ambiance to a home, whether it’s in the kitchen or the bedroom.

They’re easy to install, even for homeowners.

Dimmer Switch Installation Tips

Even an easy installation can turn tricky, which is why you should call your local electrician to ensure that your dimmer switch install is done correctly. Still, if you feel comfortable doing the installation yourself, here are some tips for a smooth and pain-free dimmer switch installation.

Check the wattage limits on switches to prevent overheating and overloading of the circuits. Dimmers can handle anywhere from 600 to, in some cases, 2,000 watts of power. The key is to not run too many lights on the switch and risk overheating or overloading it, which can be dangerous. You will know if there is something wrong with one of those scenarios if, when you touch the dimmer after installing it and running it, it’s hot to the touch. Warm is normal; hot is not. This is one of the reasons why you should consider calling the best Dallas electrician to help oversee your installation.

Make sure that there are no other dimmers connected to the same circuit. Much like having too many appliances in the same circuit can be a danger, too many dimmers can cause overloading that results in dangerous circumstances and costly repairs.

Never use fluorescent bulbs with dimmer switches. Fluorescent bulbs will not work with dimmer switches. If you really want to use fluorescent lights, you can find some for a pretty hefty price that will run on dimmers.

Ordinary dimmer switches cannot run devices that rely on a motor, like ceiling fans. Ceiling fans are set to run at a specific, predetermined wattage and therefore they are not compatible with dimmer switches, which gradually adjust wattage.

Older styles of dimmers can sometimes interfere with audio equipment, creating a humming or whining noise. The best Dallas electrician can quickly recognize this as a sign that the dimmers are too old. To resolve this issue, you must either install a new dimmer or install a noise filter.

ElectricMan: Answering Your Dimmer Switch Questions

With over 27 years of experience with installations great and small, the best Dallas electrician team at ElectricMan can answer all of your dimmer switch questions and install your dimmer switches properly, quickly, and efficiently. To learn more about our services, visit us here or connect with us on any of our social sites. And if you ever have any questions, please feel free to call us at 972-792-7270 or use the Contact form on our website!

A school, whether its grade school or a college campus, can use up a lot of energy during the day. From heating the building to inefficient lighting fixtures in the building; a school that is running 8-10 hours a day can prove to be a huge consumer of energy and thus; a high overhead to maintain.

This post is specifically for those whom work for a school or college campus that can either make the decisions, or can recommend new ideas to those who do make these types of decisions. The overall goal of this post is to bring the most actionable energy saving ideas for schools so that you can start looking into them immediately.

We are going to be covering 15 practical tips and ways that you can start saving energy in schools and become a greener, more sustainable facility overall. Here they are…

hallways, classrooms, and really anywhere with lower ceilings that are flat.

This technology is, more often than not, fluorescent. Believe it or not, this actually isn’t the most energy efficient lighting technology out there. So what is you ask?

Well, LED technology is by far the most efficient luminaire on the market today. By switching from fluorescent to LED, you will be able to realize a 30% reduction in energy usage associated with your tube lights.

As for you parking lot and sports fields, you can make the switch away from technologies like metal halide or HPS over to LED and realize every greater energy savings by up to 75%! Talk about a lot of energy being reduced.

And no, screen savers don’t save energy. But, what does save energy more-so than a screen saver is the “sleep” function that every computer has. On top of that, next time you plan on upgrading your computers, make sure you buy Energy Star qualified ones. This means they’ve passed some energy efficiency tests and are much more energy efficient than non-qualified computers are (same with your lighting system, make sure it is Energy Star or building commissioning, you get every single last area of your school inspected to ensure it is running exactly how it was designed to run. A lot of times we overlook things that are unique issues to your school, and no matter how long of a list we read on ways to conserve energy at school; we will never see everything. So our tip for you is to bring in a professional to do a full building commissioning audit, and let them tell you what is up.

Face it, a lot of classes happen during broad daylight and by not using up that free light from outside is a pure waste. By opening blinds to there fullest (when appropriate) you can reduce the amount of lights you need on by nearly half, depending on the day and time of year.

Just make sure to remind everyone to do this otherwise, you’ll never will with this tactic. Remember: you need to get the school on board or else you can only do so much.

Alternatively to just opening the blinds and windows, installing skylights into virtually any area of the building can be an even more effective way of getting the most natural light into your building. This is probably most beneficial for areas that would otherwise have no natural light whatsoever, such as hallways or interior rooms.

We’ve already brought up some points about your heating system, but here is yet another. Think about how often students are in the hallways, not nearly as much as they are in classrooms, right? So, why not make an initiative to heat the classrooms and stop heating those huge hallways that waste tons of heat to the outside from all those doors being opened.

Just make sure that everyone is closing their doors if you do decide to go this route. Likewise, you could install doors that automatically close which will prevent random doors from being forgotten about.

Although this won’t directly save your school energy, it sure does help reduce both waste and energy associated with creating new materials. The most simple way to start the promotion of recycling at school is simple; make it readily available. If you aren’t putting recycle bins next to every trash bin, most people won’t go out of there way to recycle so they will just throw it away and let it go to the landfill.

A step further would even to start investment in solar technology can be hefty, but rebates and grants are out there to make it a more affordable option that ever. On top of that, you are becoming a role model to the community by showcasing what conserving energy can do when used with solar energy technology. Let solar generate your building a positive ROI all while conversing the planets resources.

We think the list could endless of all the possible ways to save energy in school, so we must of forgot some. Be sure to comment down below your energy conservation tips that will help out school facilities become greener!

Conclusion

All of these tips are exactly how energy efficient schools are becoming more sustainable, reducing ongoing costs, and generating a positive atmosphere and educational system for students and generations to come.

Don’t let the upfront costs scare you, instead look at the bigger picture. If you have to invest money now to save 10x later, isn’t it worth it? All of these things will do just that, improve the bottom line. And not only are we doing that, but we help the environment out just a little bit too. Sounds like a win-win to us! Just remember that saving energy at school doesn’t have to be hard, just take it step by step and you will slowly see the results of your efforts build up!

Anyways, to wrap it up we’d like to invite you to share any of your own energy conservation tips for schools that you may have done or even just thought of that may benefit other schools across the globe. Share your tips in the comments below, you never know who it may help. And remember, an energy saving school is a happy school!