CRI) of 82 to show the true colors of objects and surroundings.

A rocker switch allows for two levels of light, but the fixture can also be dimmed with an electronic low-voltage (ELV) dimmer. Up to 10 under-cabinet fixtures can be joined in a series with our interconnect cables. The low-profile white aluminum fixture has 120V AC operation and is designed to last 30,000 hours—three times longer than equivalent fluorescent fixtures.

Over the years, our clients have asked many questions about their electrical systems; how to best care for them, what the cause of certain issues are, and more. We’ve compiled just a few of the most common questions we get below, with our responses.

A: Is the switch all the way in the “off” position? You have to feel it click off before you can reset it. If you are able to return it to the “on” position—you’ll feel another click—and it does not trip again, then you were successful. If it continues to trip, then there could be a chance that you have a short circuit or an overloaded circuit. Quite often, an electrical panel upgrade is the solution.

A: There are a number of possible reasons this can be occurring. First, check for a tripped circuit breaker. Then, if it’s a GFCI outlet, check for a reset button right on the outlet itself. Push that, if there is one. In the absence of either of these issues, then it may just be an old outlet that needs replacing. Just like any other electrical component, it can wear out over time and is usually no reason for huge concern.

Do, though, make sure you don’t smell or see any smoke or smoldering—this can be indicative of frayed wires starting an electrical fire. If you do detect smoke, your next step is to call the fire department.

Flickering can happen with certain types of lightbulbs and are sometimes not a cause for concern at all. However, if either of flickering or dimmer are occurring when you turn something on or an appliance cycles on in your home, then you probably have an overloaded electrical panel. Another possibility is that the lightbulbs you have installed in whatever fixture is creating the issues are not adequate bulbs for that fixture.

You will be spending a lot more time indoors over the next few months as we ride out yet another winter. You will want to do what you can to ensure your family is as safe as possible inside your home. There are a few things you can do today to provide an extra layer of safety. Your Beverly Hills electrician is here to help you. You can count on the team at The Electric Connection to provide you with a knowledgeable, experienced electrician to take care of the following safety features for your home.

• Replace your old, standard outlets in the kitchen and bathroom areas with GFCI outlets. These are designed to cut the electricity the second the circuit is interrupted. These outlets are especially handy in areas where water is present, like the kitchen and bathroom. If an appliance is accidentally dropped in water, the breaker will trip, cutting off the electricity and reducing the risk of electric shock.

• Have hard-wired smoke detectors installed. These smoke detectors rely on your home’s main power rather than a battery. Dead or missing batteries in smoke detectors are often to blame for late warnings in the event of a house fire. The detectors are all interconnected so when one goes off, the rest of the alarms are sounded. You will need the installation completed by a professional electrician. Beverly Hills homeowners will feel better knowing the wiring was handled by somebody trained to work with electrical wiring.

• Carbon monoxide detectors are also handy devices that every home should have. If you use natural gas for your heat or have a woodstove, a carbon monoxide detector can warn you to unsafe levels of carbon monoxide in the home.

Your home is somewhere you should feel safe. These rather easy and inexpensive safety features can eliminate some of the risks in your home. Give The Electric Connection a call today and schedule your safety enhancements.