When you need electrical power but the nearest outlet is too far away for your device to reach, an extension cord can bridge the gap and bring the socket to you! Extension cords come in numerous shapes and sizes, and are intended for many different applications. However, are you choosing the right cord for your needs? Believe it or not, not all extension cords are created equal, and depending on the amount of energy you need and where you need it, you should carefully consider what cord you’re using. Check out our blog now to learn about the different types of cords and which one you should choose for the job.

While extension cords are great because they let you bring power virtually anywhere you need it, you should also think very carefully about where you will need this power, and where you plan on drawing the electricity from. Longer isn’t usually better, and in fact, the longer your extension cord is, the lower the delivered voltage will be. The more distance electricity must travel, the weaker it will be when it reaches you. This is because every cable has a certain amount of resistance, which causes your voltage to drop as well as produces heat. If you can help it, don’t use a 100-foot extension cord if you only need power about 20 feet away. You’ll bring better voltage over a shorter cable, and have less cable to manage during use as well.

On a related note, if you do have to bring electricity to a further-away distance, never link two extension cords together. This is a recipe for disaster. If you must bring electricity to a further-away distance, always upgrade to a longer cord that will meet your needs.

If you pull too much power through too small of a cord, you will draw too many amperes (or “amps” for short), and the cord itself being too small or having too much internal resistance will get hot and possibly fail, which could result in melting, sparks, and even a bad electrical fire. A device that uses more electricity, such as a major appliance like a stove or electric grill, should always be plugged into a larger-gauge extension cord, whereas smaller gauge cords are generally safe for use with things like laptop and phone chargers, low-energy lamps, and more.

Extension cords are a huge trip hazard, and the more you use one, the more likely it is that someone will eventually get tangled up and fall because of it. Be very cautious where you run your extension cords, and always make sure you secure them down with tape or cover them with a large carpet or rug to make sure nobody will accidentally become tangled in one.

If you own a business and find you are in constant need of an extension cord to a particular spot, you may want to consider calling a Marietta electrician and having them permanently install a new electrical outlet to get rid of the need to use an extension cord all together. This can significantly improve worker safety even save you money on your electric bill by helping your devices get the voltage they need easier.

As the rest of the world is observing Discovery Channel®’s legendary Shark Week 2014, we at Mr. Electric® took it upon ourselves to set aside this time to celebrate what we have endearingly termed Spark Week. While the fascinating facts and featured film clips of the mystifying creatures are fun and interesting to watch, we believe the electric spark is just as deserving of our appreciation for a week as sharks are – especially taking into consideration that electricity wouldn’t exist without it.

As far back as 600 BC, a Greek philosopher by the name of Thales of Miletus discovered that when amber is rubbed with a cloth, it can be electrified and attract other objects and produce sparks. German mathematician and philosopher Gottfried Leibniz made the association of sparks with electrical phenomena in 1671. There were some more experiments performed in 1708 by Samuel Wall with amber rubbed with cloth to produce sparks. And finally, the story we are all familiar with, in 1972 Thomas-Francois Dalibard and Benjamin Franklin each independently demonstrated that lighting and electricity were the same thing. Ben even extracted sparks from a cloud during a thunderstorm with his famous kite experiment.

The discovery of the electric spark encouraged electrical research. Once scientists began to understand how electric sparks occurred in nature, the question became how that power could be harnessed and controlled. This was the beginning of electricity.

Spark plugs begin the combustion in your car’s engine, allowing you to start your car every morning. The discovery of the electric spark led to the development of spark-gap transmitters. While these transmitters are no longer used in radio communication today, they played a large part in the beginning of wireless communication. Without sparks, you would have a much harder time driving, listening to music, and even seeing in the dark. The discovery of sparks is one of the most important scientific advances in history, so don’t forget to celebrate Spark Week!

If you’re tired of shelling out a crazy amount to the energy company each and every month, then maybe it’s time to look at how your household is consuming power and improve the efficiency of your usage. To help with that, our Top Rated Local® Des Moines electricians have committed to taking calls and appointments specifically for improved energy efficiency.

If your energy bill is high, then there is a really great chance that your break-even point will be very low. In case you’re not one of the many financial experts that call Des Moines home, a break-even point is essentially just an investment term that is used to calculate the potential risk of a course of action compared to its likely reward; this means that the break-even point for your investment in optimization will be achieved through reduced monthly energy costs + any local or federal subsidies the improvements qualify you for – the costs of installation or upgrading. Costs, in this case, can be both financial and temporal, meaning that your savings need to rack up quickly to account for the time and money you’ll invest up front. The good news is this: Many new homes (built in the last 5 years) can be drastically upgraded and optimized, and just about all below that line (older than 5 years) will see an even more dramatic improvement.

When power reaches your home, it inevitably is routed to and through an electrical panel; this panel determines much of your home’s energy efficiency before anything is even turned on. From the electrical panel to the wiring and outlets themselves, the amount of upgrades and optimizations that can be done for a comparable cost to the original outdated panel that dramatically reduce energy waste are dizzying. From the smallest changes, such as installing energy-efficient lighting or new outlets, to full-scale electrical overhauls, the potential for savings are really multiplicative.

Our electricians come into the picture by offering the tools and experience necessary to quickly and effectively route out outdated and inefficient systems and find the optimal solution for improving your home’s flow of energy. In as little as a few minutes, our electricians can make pointed suggestions that can and will save you substantially on your energy bills or find nothing noteworthy enough to justify the cost based upon the break-even point. At Electrical Gurus, we believe in offering this service to optimize your systems to make them safer and save you money, not add on an unnecessary expense.

Get in touch with the master electricians at Electrical Gurus for an expert opinion on what can be done to reduce your home’s energy costs. We are proud to serve the entire Des Moines area with both residential and commercial electrician services; contact us today to put those skill to work for you!

When it comes to creating stunning interior spaces in their homes, property owners pull out all the stops. They hire the best designers, choose the best materials and hire the best contractors for all the installations. While all these aspects are important, it’s also important to have the right kind of lighting. After all, you do want your home to look as stunning after dark, as it does during the day, don’t you?

However good lighting is never a matter of chance. It takes a great deal of planning and choosing the right fixtures and lighting systems and bulbs to ensure you are able to achieve the effect you want. Lighting has the potential to completely transform the look of your home and it can turn your house into a welcoming and comfortable home.

Regardless of how well thought-out all the other details in your décor and interior design are; all your luxurious flooring, stunning wall coverings and superb furnishing won’t have the right impact if your lighting isn’t planned well. Here are some aspects you should consider while lighting any residential space:

Every room will need a different type of lighting; and this will be dependent on the activities that take place in that room. Here are some pointers:

If your home has high ceilings, you can use recessed lighting- these fixtures are inserted into ceilings and the fixture is fitted inside it. Adding dimmer switches to these directional lights allows you the flexibility to change the lighting effect from subtle to full-bright.

It’s a good idea to add this in most rooms; it’s especially important that you have night lighting incorporated into kid’s rooms and nurseries. Table lamps and wall sconces are a good option for these spaces.

Many people like to have chandeliers in these rooms. Choose these smartly and ensure that the one you opt for doesn’t date the space. If you have very elaborate and embellished interiors, a traditional, opulent chandelier might look stunning, but it will look completely out-of-place in a modern-styled home.

For the latter, you should opt for more minimalistic chandeliers that have simple designs with small and ornate crystals to throw more light. No matter what type of décor you have, it’s important that you measure-out the entire space as well as the ceiling height in every room before you order pendant lights or chandeliers, and ensure there’s sufficient head room under these fixtures.

We at Allround Electrical are licensed and insured electrical contractors. We can provide consultation on different types of lighting systems, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263