In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

Looking to jazz up your yard for this season’s summer festivities? A little outdoor lighting can go a long way! From fancy patios to tree-lined country yards, the right outdoor lighting can help you meet an array of needs, including illumination that makes tasks easier, sets the mood, and keeps your family and guests safe.

Cooking and entertaining festivities held outside after dark need lighting that is convenient and safe. Practical and economical, wall mounted lights can meet an array of needs, providing focused task lighting for…

Carriage lanterns can help define patio and walkway edges, lighting the path to doors and entryways and illuminating obstacles such as stairs and garden beds.

Parameter lights offer form and function, adding a decorative element, but more importantly, when properly placed at key points in your yard, add guidance to entry and exit points on your property.

Mixed lighting can create a truly magical effect throughout your property. Professional installation can save you time and money, conveniently planning and tapping into preexisting electrical lines.

To easily control brightness levels according to time or mood, you may wish to consider adding dimmers to newly installed or existing outdoor lighting.

Make plants and landscaping pop with LED illuminated planting pots. Far from the average run-of-the-mill flower pot, these amazing lights not only make plants pop, but radiate high level outdoor light, making them an excellent choice for walkways.

Not just for holiday lighting anymore, string lights can add sparkle and mood to any outdoor setting, such as trees, pergolas, arbors, posts, and furniture. They are also very effective when used to line railings, guiding guests along walkways.

From classic outdoor camping lanterns to fun craft finds, suspending lanterns from trees with fishing line can bring romance and magic to outdoor entertaining spaces. Battery operated or real tea lights make illumination a breeze, just be sure to keep candles a safe distance from leaves.

When choosing fixtures and bulbs for outdoor lighting options, consider energy saving LED options, which use up to 85 percent less energy than incandescents and up to 50 percent less energy than fluorescents. Hate changing outdoor bulbs? LEDs last more than 10 years on average - that's 25 times longer than incandescents and 2-5 times longer than fluorescents.

Solar lighting options are also an excellent choice, converting and storing the sun’s energy and coming in a variety of types and uses, including wall-mounted, lamppost, security lights, and lanterns. Be sure to check “nightly run times” on product labeling to ensure you have enough sunlight for operating solar lights in your area. Feeling crafty? Make a few solar decorative lights of your own.

Adding outdoor lighting to your property can be fun if it’s done properly and safely. Some installations may require running underground electrical cables, additional wiring within the walls of your home, the installation of fixtures, proper GFCI outlets, and more. Ensure all outdoor home electrical work is installed properly and safely by a licensed professional, using UL listed, weatherproof, safety compatible materials and devices.

Transform your space and take full advantage of your time outdoors. Contact Mr. Electric® and brighten up your yard with the latest in outdoor lighting today.

Electricity can be a lethal weapon that can threaten a person’s life or cause major injuries to yourself, others or your property. We would like to take the time to discuss some of the precautions to be taken after or during a power outage, flood or other life-threatening disaster.

Downed Power Lines carry large currents of electricity that could cause serious injury or even death. Never touch a downed power line with your hands or with any other object as your body is a conductor of electricity and the contact could electrocute you. If someone is in contact with the downed line, electricity can move through that person so do not touch the person. Call emergency right away.

Flooded Areas are also a large concern during a disaster. Submerged outlets or electrical cords could energize the water in a flooded area causing it to be a threat for anyone attempting to step into the area. Also, make sure to not use any electrical appliances that have been submerged under water until getting them checked by a professional. It is difficult to observe the electrical damage caused by water and without a trained eye, you could be putting yourself in danger.

Portable Generators, generally thought of as a good source of electricity and a “life saver” during a disaster, can also cause electrical safety issues. If the proper measures of care aren’t taken prior to the disaster, the portable generator could turn into an electrical safety hazard. Ensure that the generator is properly grounded, kept dry, and not overload. Do not connect the generator directly to household wiring. This can back feed along power lines and cause electrical danger to anyone who comes in contact with it.

If you are pre-warned of a potential disaster, turn off all your appliances, disconnect sockets, and switch off breakers. This will minimize the electrical dangers that may occur during or after the disaster and ultimately save the lives of your loved ones.

Contact Expert Electric at 604-681-8338 for more information on the precautions you should be taking to ensure the electrical safety of your home during a disaster.

Electricity is something we use every single day, at home and in our workplace. Commercial and industrial establishments would never be able to function without it, and yet we take it for granted – at least until the time something goes wrong with it. While the electrical fixtures and fittings are all within sight, the wiring and other related installations are typically out of sight. This also means that we don’t really pay much attention to them at all.

What we don’t realise is that while most electrical issues seem like they have arisen out of the blue, there are almost always some warning signs. Electrical issues can result in electrical fires that can be extremely dangerous. Melted wiring is one of the commonest causes of electrical fires. There are a number of things that can lead to melting of electrical wiring, such as:

Electricity anywhere has an electromagnetic field; and the electricity flowing through the wires on your property is that way too. This electromagnetic field is at a certain level and that is why it isn’t really evident. However, at times there is an excessive build-up of electricity in the wiring on your property, which weakens the wires. If you don’t address this issue on time, the wiring will melt and result in arcing, and that is when you hear the crackling, hissing or buzzing sound emanating from wires.

All electrical installations are made to carry a certain amount of power load. Older structures tend to also have decades-old wiring; that is unable to bear the load of current-day, power guzzling electrical appliances and equipment.

If you run too many of these all at once on your property, it results in an overload in the system. Typically when this happens, the fuse connected to that particular circuit blows. If, for some reason, this doesn’t happen and the electricity continues to flow through the system, it will cause the old wiring to melt.

A short circuit is caused when a neutral wire comes in touch with a live wire. Just as in the case of a power overload, if this occurs, the fuse will blow and the electrical supply within that circuit will get disconnected. However, if this doesn’t take place & the electricity keeps flowing through the wires, they will get heated up and melt.

If you find anything out of the ordinary with the electrical installations in your home/commercial establishment, never defer calling in an electrician to check what the issue is. The signs to look out for are arcing in electrical installations, switches and powerpoints that are hot to the touch etc.

Attending to all these issues on time will ensure that you have less problems to deal with, later. Never forget that electrical issues can be very dangerous and the more you defer getting them checked, the more you endanger your safety and that of anyone who lives or works on your property.

The one way to prevent electrical issues from surfacing in this manner, is to opt for preventive electrical maintenance services. As part of these services, the electrician will come in at pre-decided intervals and thoroughly test all the electrical appliances, fixtures, installations and wiring on your premises. If he notices anything out of the ordinary, he will inform you about it and it can be fixed before the issue aggravates and poses a risk to life and property.

We at Allround Electrical are licensed and insured electrical contractors, and offer a range of electrical services to commercial and residential customers. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address. You may also reach us through this online contact form.

Thanks for reading,1300 169 263