We all like using lights that we have collected over the years, but along with this also comes a great deal of responsibility. Please check any Christmas lights or decorations, such as wreaths, that light up for before they are used. The plastic or glass that surrounds the light should be intact, and should not contain any cracks or breaks. Please inspect the wires for tears fraying or damage.

If lights are being plugged in outside on the trees, roof top, doors, or driveway make sure you have enough electrical outlets. Do not overload your outlets and use only ground fault outlets as this will help to keep your lights and yourself safe, as they will most likely be exposed to wetness and moisture. Also make sure your extension cords do not become a tripping hazard.

When choosing a real tree, make sure it’s not too dry and not close to any candles. Christmas lights can be used to decorate real and synthetic Christmas trees. Lights should be in their best condition before being placed on the tree. Turn all Christmas lights and decorations off when you leave the house or go to bed to avoid electrical fire. Don’t use electrically powered ornaments or lights on metal decorative trees or decorations as the sharp edges may cut the cord and cause a shock and fire hazard. Due to heat danger keep your tree 3-4 feet away from fireplaces, electric heaters and floor registers.

4. Christmas “bubble” lights were popular in the 1950’s and contain coloured liquid. These should be kept away from children, as the covering of the lights can be broken, and children may attempt to drink the liquid inside. Strings of lights should be kept tucked away or taped to walls so that children cannot easily pull the cords and injure themselves or damage furniture.

5. LED’s are much more energy efficient and give off almost no heat. LED lights help protect from overloading outlets they are much safer and you can use more of them with the same available power source so your home will look like a Christmas wonderland!

DC motors are electrical devices which draw electricity (direct current) and convert it into mechanical energy. They have many uses in today’s industries, even though alternating current is the preferred choice for mains power supply. They are especially useful for machines that need to be driven at variable speeds.

Electrical issues have a way of cropping up all of a sudden. At that point of time, the only thing on your mind is that you should be able to contact an electrician who will deal with the issue without delay. If you look online, you will find that Sydney has a large number of electrical companies, big and small and you may feel that identifying a good electrician shouldn’t be much of a challenge.

This could be no further from the truth. There’s much more to zeroing-in on the right electrical contractor that than. As a matter of fact, if you aren’t too particular about who you are hiring for the job that can easily lead to a major fire break-out on your property. This is something you want to avoid under all circumstances. The very first things to take into consideration are:

It’s common knowledge that you would need an electrician to install/ replace/repair/maintain electrical systems. In our country, you are legally permitted to replace light bulbs and operate electrical appliances in just the manner they are designed to be operated. Apart from that, all electrical jobs should be handled by a certified and insured electrician and this can include:

The rule of thumb is that even if you feel a particular job is very minor and you know exactly what you’re doing, it’s important that you call an electrician. It’s vital to understand that any type of DIY electrical work can be extremely dangerous – it can result in fire, damage, injury as well as death. Here are the things you should be looking for when you are choosing an electrical contractor:

We at Allround Electrical are licensed and insured electrical contractors; we can rectify all types of electrical faults and provide a range of electrical services. For more information, contact our friendly team today at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

With the DIY craze in full swing these days, do-it-yourselfers are attempting to refurbish, rehab, rebuild and remodel anything and everything within the walls of their homes. All you have to do is turn to any home improvement channel to observe a novice trying to tackle a major home renovation project. Some seem to know what they are doing, but most do not.

It is astonishing to see the number of load-bearing walls carelessly knocked down in the name of remodeling. Even more disturbing are homeowners who flirt with disaster by cutting live electrical wires! When the sparks start flying, these DIY-ers act shocked (no pun intended) that the wires are hot!

Electrical Permits

Much of this work is done without the homeowner getting the proper permits, which can create serious safety risks, not to mention invalid insurance claims regarding faulty workmanship. Scenarios like these are the perfect formula for a catastrophe!

Major or minor electrical work that is not properly permitted usually results in a denied insurance claim if damage, such as fire, results from improper work. Although it’s perfectly legal in most states for the homeowner to do his or her own electrical wiring, it can actually be less costly to have a licensed professional do the electrical work for you; it’s safe, licensed, permitted and done properly. Your insurance company will thank you!

Insurance Benefits

In fact, many major insurance companies offer a number of discounts if you have your electrical wiring upgraded to current codes. Check with your insurance company, and then contact a licensed electrician to learn the safety and cost benefits of having your home’s electrical service updated. Some DIY projects are better left to the professionals. This is one of them. After all, you can’t put a price on safety!