Did you see the news Friday about Des Moines south side homes without power?  More than 7,000 residential customers were without power.  The week before this occurred we installed a whole house generator in a home in the affected area.  When the power went out the Kohler generator we installed kicked on and powered up the entire home.  The whole house generator ran continuously for most of the day while its residence who were home at the time worked and continued there daily routine without power interruption.

Residential Whole House Generators are no longer just a luxury.

Why do you need a whole house generator?

* Our infrastructure is aging.  Its a fact that our power grid is aging and needs updating and constant maintenance.    While crews work hard to maintain reliability, down time will still happen at times.

* Storms are not going away.  Less face it, Mother Nature never sleeps.  From tornados and electrical storms to Heavy snows and ice storms weather isn’t going to give us a break anytime soon.  It’s a fact that Des Moines sees a variety of  weather.  As they say if you don’t like the weather in Iowa wait a few hours!

* Our homes are relying on more and more electricity.  Almost everything we purchase for our homes needs electricity.  Even your mobile phone needs charged at some point.  When is the last time you bought a item for your home that was a non décor item that required no electricity?  Even the amount of power going into homes as increased to compensate for our ever growing demand for electricity.

* Lack of other affordable and reliable alternatives.  As much as we would all love to go green.  Solar power and wind power has not yet become a cost effect and reliable power source for residential applications in Iowa.

Need a whole house generator installed?  We can install most major brands such as the Genrac standby generator in the picture and also Kholer generators.

LED foyer fixture from Artcraft

Saving on energy costs and outfitting your home or office environment with new lamps and light fixtures should be at the top of your home improvement project list.  Not only do new light sources deliver a superb quality of light, they are the key components in decorative and energy-efficient lighting design.

It is an exciting time in the lighting industry.  New products are being developed every day, and LED (light emitting diode) and SSL (solid-state lighting)*  lamps and light fixtures are at the core of future illumination.

What’s more, the integration of LEDs into building and electronic communication systems is bringing everything together and enabling total control with the ease of a smart phone!

Here are some guidelines to help you answer those questions and invest wisely toward one of the greatest home improvement projects of the decade:

WHAT YOUR LIGHTING DESIGN CAN AND SHOULD DO FOR YOU…

In addition to providing optimum levels of brightness, good lighting design must also…

•Eliminate glare

•Increase comfort

•Provide continuity

•Deliver good color rendering

•Allow for adjustability

•Instantaneously make you ”feel good” with an inviting luminous appeal

Because LED lamps require so little energy to provide a great deal of illumination, the energy consumed by the bulb will not be your main concern; your main concern will be getting the desired level of brightness and light appearance.

*NOTE:  LEDs, also referred to as SSL, provide the most energy-efficient and durable illumination because they are composed of “solid state” semiconductor light emitting diodes.

1.    Familiarize yourself with labels on new bulb cartons.

Brightness (in lumens)

Estimated Yearly Cost (depends on rates and use, $)

Lamp Life (based on 3 hrs/day use, rated in years)

Light Appearance (CCT)  (warm-cool, rated in degrees Kelvin (K))

Energy Used (in watts)

Color Rendering (CRI) (measured on a scale of 0-100)

BRIGHTNESS

Brightness levels are measured in lumens to give the amount of total light created by the light source.  Beyond the lumen count, “useable” light and brightness levels are also affected by fixture housings, lenses, filters and shades.  There are clear standards set to measure the lumen output of each LED chip.  ↓

LIGHT APPEARANCE  

Light appearance or correlated color temperature (CCT) helps determine the quality of illumination.  Designated on the Kelvin (K) scale, CCT for decorative interior spaces should be in the warm white (2700-3000K) range.  Sometimes lighting in the neutral white (3500-4000K) is preferred for certain areas, such as bathrooms and kitchens.

LAMP LIFE AND THE LED

Lamp life refers to how long a light source will last once it is installed and used on a daily basis in a typical application. Lamp life ratings, based on estimates from testing,  convey the time that half the bulbs in a sampling have burnt out or dimmed below fifty percent.

COLOR RENDERING AND THE LED

The color rendering index (CRI) measures the ability of a light source to bring out the true colors in décor, objects and surfaces.  Based on a scale of zero (no color rendering) to 100 (perfect color rendering),  a minimum of 80 CRI is acceptable for interior lighting applications.  A CRI of 90+ is even better.

However, because the standard CRI measurement does not always yield true results for some LED light sources, a new standard measure of color quality is in the works:  The Color Quality Scale (CQS) may soon replace CRI for a truer account of color rendering provided by the LED light source.-www.ledlightingexplained.com, Philips Solid-State Lighting, 2010

2.    Match light fixture to light source to ensure peak performance.

LEDs small size, low-temperature emissions, and focused uni-directional beam patterns make them perfect light sources for undercabinet lighting, track lighting and pendant fixtures.

LED general and flood lighting replacement bulbs are composed of clusters of diodes to provide broader beams of light.  General service LED bulbs that are multi-directional with 360-degree angle capacity are doing an excellent job of replicating the desired illumination of old incandescent bulbs. These LED  lamps include A19, PAR, BR and candelabra light sources that are providing more light with the added benefit of tremendous energy-saving, maintenance-free illumination.

Due to their long life and durability, LEDs are excellent in hard to reach places like foyer, attic and cathedral ceiling fixtures.

*Check for compatibility with all new light sources to make sure lamps, light fixtures, dimmers and automated controls are a suitable match.

3.    Compare “apples to apples”; diodes to diodes to ensure top quality.

 Many factors contribute to the quality of the LED light bulb.   Advancements in diode technology and mass production of LED light sources are bringing costs down to make these bulbs more affordable.  However, be wary of “cheaper” LED light sources.

•COB (chip on board), the diode itself is composed of a chip that largely determines  the quality of the bulb.

Prior to being marketed in appliances, fixtures or light bulbs, LEDs are sorted into bins according to their light output (lumen output) and color temperature.  Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

LEDs chosen from bins with higher lumen output are of better quality.  Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation , so they deliver an inferior quality of light.

•LPW (lumen per watt), this measurement helps to determine energy-efficiency and efficacy

•IC (integrated circuit) drivers, the quality of the LED lamp is also dependent on the type of driver installed.  LED bulbs contain “drivers” that can fail just like the ballast of a CFL (compact fluorescent). Better driver components make for a higher quality LED light source.

ENERGY STAR-ratings ensure that the LED has met stringent testing procedures.  ENERGY STAR-rated lamps clearly identify characteristics on LED light sources to guarantee that they consistently and reliably meet the desired brightness (lumens), energy-efficiency (lumens per watt), color temperature (CCT), color rendering (CRI), and dimmability requirements.

New ENERGY STAR Regulations include:

•Consistency Control:  More standardized testing methods to improve consistency.

•Dimmability Ratings:  A lamp is either dimmable or not dimmable.  If a lamp claims to be dimmable, testing is required and it must dim down to at least 20 percent.  If it is not dimmable, it must say so on the package.

•Greater Energy Conservation:  Efficiency requirements have increased for specific lamp wattages and types.

NOTE:  The Environmental Protection Agency (EPA), along with ENERGY STAR offers rebate programs as an added incentive to help you spring into action and upgrade with LED.  Check out rebate programs in your area or contact an American Lighting Association (ALA)-affiliated showroom for more details.

LED chandelier “Niagara” from Lladro

1800lighting’s Top LED Bulb Pics:

Bulbrite’s  LED  MR16 lamp

Philips medium base LED

Philips dimmable LED

Satco’s PAR38 indoor-outdoor LED lamp

Satco’s Kolour One A19 omni-directional LED lamp delivers 820 lumens and excellent color consistency.

Satco’s Ditto PAR LED lamps are available in 25- and 40-degree beam angles and either 3000K or 4000K.

Fun Fact:  “To talk turkey,” means to speak candidly, directly, plainly and/or bluntly. There are several possible explanations to the origin of this phrase.  Some support a link to uncensored familial conversation around the Thanksgiving dinner table; Others say the phrase is linked to the actual sounds a turkey makes, because the male turkey’s “gobble, gobble” is a basic, unadorned, matter-of-fact kind of vocalization.

Wherever your holiday “turkey talk” may lead, Capitol Lighting’s Thanksgiving feast is sure to please everyone with custom designed lighting at unbeatable prices.  The lighting experts at Capitol will help you to illuminate your home for the holidays…elegantly, efficiently and affordably.

A little light goes a long way to bring charm and soothing illumination to the home environment.  Crystal mini chandeliers, mini table lamps, and other mini lighting fixtures create the stylized finish to designer decorated home interiors.  Feast your eyes on Capitol Lighting’s most outstanding selection of the season!

Add to your Thanksgiving holiday with the latest lighting designs from American Brass and Crystal Lighting.  Capitol Lighting invites you to take advantage of promotional pricing on ABC’s masterful works of art, including mini table lamps and crystal mini chandeliers available in a myriad of finishes including Antique Pewter, White Nickel and True Brass with crystal options ranging from Golden Teak Strass Teardrops to colorful Strass pendoloques.

Give Thanks for the Little Things

Capitol Lighting Highlights the “Mini Strass”

Warm up the room.  Instantly create elegance. Provide your home with charm! The mini chandelier has become an increasingly popular lighting fixture and accessory in home decorating schemes due to its versatility and small size. With extraordinary styling and imaginative design motifs, mini table lamps, too, are gracing more homes than ever.

Capitol Lighting’s Top 5 “Mini Must-dos” for a Superb Finish

To view the latest in home lighting and accessories and for more designing ways to put the mini on your menu this Thanksgiving, visit with the lighting professionals at Capitol Lighting.

Enjoy designer discounts on the best from American Brass and Crystal Lighting available this week at Capitol.

American Brass & Crystal (ABC Lighting) has built a reputation as one of the premier manufacturers of the finest quality cast brass and crystal mini chandeliers. All crystal chandelier and cast brass frames are molded in Italian casts by some of the finest metal craftsman in Europe and are then adorned with genuine Strass crystal from Swarovski. Each crystal mini chandelier from American Brass & Crystal Lighting is available in any of their 17 custom finishes and a multitude of different crystal grades, shapes and colors.

Visit a Capitol Lighting showroom or shop on-line at 1800lighting.com to custom designs your holiday illumination.  Enjoy promotional values on the latest mini lighting fashions from ABC.  The options abound; with American Brass & Crystal you create a design in a crystal chandelier that is uniquely your own and each one is hand made by American artisans with meticulous care.

While ductwork can be quite efficient and effective in its distribution of conditioned air throughout a home, this is only the case when that ductwork is in impeccable working condition. Air leaks in ductwork are among the most common causes of efficiency drops in residential cooling systems. By eliminating the need for air ducts entirely, you can eliminate the risk of such air leaks in your home.

When using a ducted HVAC system, you can also utilize a zone control system in order to better regulate the distribution of heated and cooled air throughout your home. With a ductless system, though, this level of control is just part of the package. Such systems use individual, wall mounted blowers in order to distribute conditioned air directly to the spaces in which they are installed. Each is controlled by its own, individual thermostat. This allows you, the user, to set different temperatures in different areas.

You can have a designated ductless AC system, but you may also choose to utilize heat pump technology in order to both heat and cool your home with one convenient system. When you do, your ductless mini slit system will be able to absorb existing heat from the air outside, and to use that heat in order to efficiently warm your home. Contact us today to learn more or to schedule ductless AC services with trained professionals.