Having an electrical problem is never going to be a good time. We rely on electricity for nearly everything, and so it’s quite understandable that you’re looking for service in a hurry. But before you go rushing in, the experts at Hoffman Electrical have some things to say. Getting a cost-effective electrician is great, but there’s a fine line between cost-effective and cheap!

Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.

Office spaces are a place for color temperature of 5600k, we don’t need to quite match this. A level between 5000k to 6000k will do fine for an office environment to prevent sleepiness.

Exposure to non-artifical light (aka, natural light from the sun) is known to this post by luxreview.com that should lead you in the right direction.

From there, ensuring you know all of the rules in your area will be the best route to ensuring you aren’t breaking any laws with an improper lighting system. The added benefit to following these rules is you can drastically reduce any possible liabilities you may incur if you had otherwise ignored these rules. So, we find it best to follow them!

Additional considerations

Not only are the above tips important to consider, but strongly considering LED office light technology can prove to supply the above benefits along with the following:

Energy savings.

It’s not uncommon for companies to list of 9 ways LED beats fluorescent on our blog, it’s certainly worth checking out.

Longer lifespans.

Longer life spans by 2 to 3 times is very common when converting to LED from other lighting technologies, just as much as its very common for the insane energy savings we talked about above.

This has two mains benefits which we always talk about: the less often need to buy replacement tubes as well as fewer maintenance costs to pay someone to replace those lights. We like to think of the second as an indirect way longer lifespans saves you money, and it’s certainly a great benefit.

Conclusion

We’ve not only covered tips to consider when implementing a better lighting system into your office but also why LED might be a great option for doing so while also reducing overhead costs. Hopefully, by following these tips you find your way to a more productive office and lower overhead.

Inspection is performed after job completion, and a certificate issued to confirm that the wiring meets all the regulatory and operational requirements. Building wiring will only pass when properly done. This includes items like adequate grounding, no short circuits, overloaded circuits, or ground faults.

If parts of the wiring do not function during the tests, these issues must be rectified before the utility company will connect their supply.

Once operational, it is necessary to carry out regular inspections to identify and repair potential or existing problems. Residential home wiring requires a comprehensive inspection every 10 years.