Saving energy is a laudable goal. By using less electricity and other energy around your home, you reduce your contribution to environmental degradation and climate change. On the other hand, easy and reliable access to electricity is in large part responsible for the high standard of living that most Americans enjoy. Read on to learn more about the intersection between comfort and energy consumption, and how you can cut back while still participating in modern 21st century life.

Energy Consumption and GDP Go Hand-in-Hand

When it comes to residential households, cheap power allows us to run the electrical work that lends so much convenience and comfort to our day-to-day lives – refrigerators, air conditioners, lights, computers, televisions and much more. On a societal scale, access to fossil fuels and the energy potential stored within is what has made possible so many technological and logistical advances in the first place. However, as the years advance, the science is becoming ever more clear – excessive carbon emissions are causing the planet's climate to change, often in destructive and unpredictable ways.

Of course, no one wants to go back to the days of pushing a plow behind a donkey and churning butter by hand, either. The big question, and one that may become existential, is whether we can decouple our energy consumption from our standard of living. Historically, consumption and GDP have risen together in lock-step. Can the United States and other developed countries figure out how to break the chain?

Decouple Lifestyle from Consumption

A recent report by the Energy Collective tells us that “reductions in energy intensity is arguably our most important tool to achieve a sustainable energy future.” What does it mean? That we can get the same or more production out of less energy usage. In some ways, we've already made progress – between 2007 and 2013, energy consumption dropped 4.5 percent in the United States, while the Net Domestic Product continued to rise.

That's all well and good for the country, but what about your household? The same principles apply – for a more sustainable future, look for ways to get the same results with less energy use. That means switching to efficient appliances, like Energy Star certified equipment. It means replacing old incandescent light bulbs with modern LED models. And look for little changes that can make a big difference, like adjusting your thermostat a few notches up or down to reduce the load on your HVAC equipment.

Make a Difference in Your House

You can do your part to cut down on your energy use while still enjoying the amenities of modern life by making targeted efficiency investments and simple behavioral changes. If you need tips on how to reduce your energy bills without reverting to stone age-style living, or need any other electrical work, contact a reputable electrician today.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

There are some home repairs you don’t want to tackle. Here are several red flags to look for when you’re buying a home.

common plumbing problems. Water damage is the homeowner’s mortal enemy. Water causes foundation problems, rot and mold. Want to move into that mess? Probably not.

To see if your potential purchase has suffered the consequences of water damage, start outside and

When you see water damage near an electrical outlet or a light fixture, you may have stumbled onto a fire risk. But outlets aren’t the only place to look for potential electrical problems.

Look for flickering and blinking, which signals a poor connection somewhere along the circuit. Check to see if both halves of electrical outlets are functioning. Make sure bathrooms, kitchens, garages and outdoors have professional electrician should determine whether the home’s circuits or fuses provide adequate power and service. The electrician can look for burned wiring, improper connections, dead-end wiring or ungrounded switches and outlets.

Your home inspector is a font of knowledge! Have the inspector check the air quality of the home to see if any mold spores are present — if water leakage or other common plumbing problems have been an issue, mold may be, too.

The inspector can ensure that the heating and cooling systems are properly installed. The inspector can also determine how old the HVAC system is and ensure that its been maintained

Your inspector will also determine the type of pipe that supplies water to the house—old lead and galvanized steel pipes are going to need replacing.

If the house you’re considering fails these tests, it may be best to move onto the next. If you still think it’s the right house for you, despite the presence of common plumbing problems or the need for an electrical overhaul, negotiate a lower price or ask the seller to pay for needed fixes.

Questions? Thoughts? Leave a note in the Comments section orschedule service today.

Juggling the seemingly endless myriad of accessories, appliances and tools that have become commonplace in modern homes can sure be a hassle. Many homeowners find themselves routinely swapping plugs, or using devices like a power strip. While these can suffice in many situations, and offer a (relatively) effective solution, many make the mistake of relying on a power strip too much.

The only thing Kolb Electric takes more seriously than perfect service is safety! We don’t want to see you caught up in an electrical emergency, and to make sure you don’t we’ve built a short list of power strip safety tips. We also have some alternative, and overall superior, suggestions as well!

When deciding to use a power strip, keep these points in mind:

As we said, power strips are fine. In moderation, and as long as you observe proper power strip safety. But there’s a better solution! You aren’t simply stuck with however many outlets are currently installed in your home. Additional outlets can provide a safe, dependable and long-term solution to your electricity needs! The process is quick and simple in the hands of a professional, and will have you set to handle all of our modern lifestyles.

No matter what you require for your home, the experts at Kolb can provide the electrical access you need! We’ve been handling electricity, wiring and appliances for years, providing our consumers with only the absolute best in service, skill and technology. Contact Kolb today to learn more about our services, or to set an appointment!

MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save