Have you ever noticed a small spark when you plug an appliance into an outlet? This may be normal or it could be cause for concern, depending on the size and frequency of the electrical outlet sparking. It’s important to recognize the difference between a normal spark and a dangerous one—as well as possible causes for outlet sparking—so you can pursue an electrical repair if necessary.

The supply line that carries electricity through your home measures about 115 to 240 volts with a frequency of 60 hertz. In layman’s terms, this means the flow of electricity runs very fast and hot through the wires behind your walls.

Electrical outlets tap into this fast-flowing stream of electricity, powering everything from your lamps to your laptops to your coffee maker. A small blue spark arcing from the outlet to the plug can occur as the appliance suddenly draws amperage and electrons begin to flow through the cord. Once the flow steadies, the spark should disappear. This type of electrical outlet sparking is completely normal and comparable to static electricity.

Electricity generates heat as it travels through wires. Insulation surrounding a wire may begin to melt, exposing the bare wire. If it comes in contact with the metal outlet casing or even another wire, electrons can leap out of the wire and create a dangerous spark. This is called short circuiting and could cause an electrical fire if not repaired promptly.

Short circuits may be caused by a number of things, including old outlets with loose connections and too many appliances being plugged into the same outlet via a power strip or extension cord.

Water and electricity don’t mix. That’s why bathrooms should have special outlets called ground fault circuit interrupters (GCFIs). These outlets automatically shut down the circuit when they detect water, which can help prevent electrocution and house fires. If the bathrooms in your home have ordinary outlets, you should have an electrician replace them with GCFIs.

If you’ve had an electrical problem in the past, you may have attempted to perform a repair yourself or used a cheap electrician. Electrical wiring can be extremely dangerous if you don’t the proper licensing and qualifications and lead to potentially serious issues, electrical outlet sparking being just one of them. Fortunately, a professional electrician can undo the damage and make your outlets safe to use once again.

When you need a repair for electrical outlet sparking, Kolb Electric is the company for the job. We hire only licensed, fully qualified electricians to handle important outlet wiring repairs in your Maryland, Virginia or Washington DC home.

Contact us today to schedule an appointment or call 877-287-1179 to have an emergency electrician sent straight to your home.

Across Nokesville and the rest of Virginia, parents and their kids anxiously await the arrival of Spring Break. The school year can be particularly stressful for everyone, both parents and kids, so we hope that you and your family are able to take full advantage of your downtime to relax. If you’re planning a getaway for your family, don’t forget to safeguard your home against potential threats. Getting adequate rest during this time is crucial for finishing out the school year strong. The last thing we want is for you to have to cut your vacation short because something went wrong at home. To get the most of your Spring Break holiday, follow these tips on keeping your home safe!

Whether you’re going to be gone for a few nights or the entire week, ask a trusted friend or neighbor to check on your home once or twice a day. Perhaps your neighbor can even keep a car parked there for the time being. You will also want to have your newspaper and mail picked up, as nothing says “I’m not home” like a driveway full of newspapers and a stuffed mailbox.

If you’re leaving pets behind, it’s especially crucial to have someone look after them. It’s always difficult determining just how much food and water your furry friend is going to need. For the safety of your pet – and for your peace of mind – make sure they’re properly taken care of!

Homeowners often make the mistake of leaving certain lights on at all times. While this may seem like an effective deterrent, it actually does quite the opposite. Wouldn’t you find it strange, too, if the same hallway and front room lights in a home were left on for several consecutive days? The goal is to make it appear as if someone is always home, so you want to follow a normal light pattern. You can do this by installing timers so that you can program your lights to turn on and off at designated times.

In addition to gaining control over your lights, by installing smart controls throughout your home, you can check to see if you remembered to lock the front door, close the garage, or turn the heat off. Even if you do have a friend or neighbor watching over your home, you might feel even better knowing that you can check on it too, even while hundreds of miles away.

It’s easy to believe that homes without security systems are must more likely to be targeted by a burglar that ones that are equipped with an efficient home security system. Many times, the simple presence of an alarm system can be enough to protect your home and your family from a break-in.

There are occasions in which a burglar will enter a home without knowing whether or not there are actually any occupants inside or not. This can quickly escalate to a dangerous situation. If this is not enough to convince you to have a burglar alarm installed, keep reading for some more benefits.

This is particularly pertinent if you have children who are old enough to stay home alone, or elderly members of your family. Reaction times may not allow them to get out of a home with the speed required in dangerous situations, and although a forceful burglary may never happen, your family will at least have a peace of mind that there is something there to deter thieves.

In addition to protecting your family, an efficient burglar alarm helps to protect your valuables. When your alarm system is enabled, it will not only set off an audible signal, it will also alert authorities that the home has been broken into. This increases the likelihood that the burglar will be caught or identified later for the crime committed.

As all homeowners know, having insurance on their home is mandatory. This type of insurance policy covers private residences and the possessions within from loss, or damage that can occur as the result of a number of events, burglary being one. However, if you have an alarm then you’ve reduced the risk that you will be robbed, and therefore most insurance companies will provide a discount for homeowners insurance.

Thanks to smart devices, home security systems these days allow you to view your home using a web cam. Most systems also allow you to remotely arm and disarm the home, monitor multiple cameras, and even turn lights on and off and control your HVAC system.

The proud owner of a generator, whether for general use or use in an emergency, can rest assured that they have access to the power they need. But what if your generator isn’t quite up to the task? This can leave you with no means to perform normal functions at best, and at worst could leave you powerless in the face of a storm or other catastrophe. The certified experts at Kolb Electric have a strong history of handling generators, and today we bring you one of the most common complaints among generator-owners: power surges.

When it comes to communicating signs of disrepair, generators are actually rather talkative. It’s all in understanding the signs, the most common of which coming in the form of surging.

Surging refers to a generator (or other electrical component, machine or device) displaying clear fluctuations in behavior at intervals. These intervals can follow a clear pattern, or can be completely random. What exactly does this mean? Let’s use some examples.

A surging generator often will leave lights burning much brighter, then much dimmer rapidly, causing a sort of flicker back and forth. In machinery, this can also come as drastic changes in pace as well; such as a fan running faster and then slower for no obvious reason.

There are actually numerous causes for generator surging, including:

Bottom line; if your generator is experiencing surging there is definitely something wrong. The causes are myriad, but the solution stays the same. Seek professional assistance for your generator repair to ensure it’s ready and available when you need it most!

At Kolb Electric, we’ve been handling generator installation, repair and replacement for years, and we always bring our very best to any project. if you’re experiencing generator surges, don’t hesitate to contact us right away!

Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.