Electrical wiring is an important part of a home that we all depend on every day. If your home wiring is outdated, though, it can be an electrical safety hazard and result in shorting out or even electrical fires.

An electrical safety assessment can be done by a competent electrician in a fairly short amount of time and for a reasonable amount of money. A Santa Monica electrician will check for any safety hazards or needed electrical code corrections, and they will check all of the connections and wires to make sure that nothing is broken, deteriorated or frayed. An electrical safety inspection by Electric Connection, a licensed electrician Santa Monica trust most, will give you the peace of mind you need. Knowing that your home electrical is safe, you can feel rest assured that your family is protected.

Electric Connection is licensed, bonded and insured and fully qualified to do electrical safety inspections. If you’d like to find out more, please visit our website at We’re ready to help you out with your next home electrical safety assessment.

These LED lights attach easily to the front and rear of your bike. The white light clips to the front break cables to help you see where you’re going, and signal to others that you’re heading their way. The red light clips to your seat rails, brightly marking your bike’s rear. They both operate in steady beam and continuous flash modes, visible from up to a mile away. They’re weather resistant and have a long battery life.

2. Twist On Bike Lights

The media room is perhaps the most lived-in area of your home.  Whether you are watching TV or reading a book, the lighting should be comfortable, energy-efficient and beautifying.  Tune in to a picture-perfect setting with lighting tips from Capitol Lighting’s professional consultants.

1. Track and Recessed:  General or ambient lighting is a must in any room, but it is especially important in a multi-functional space such as a den or media room where there will be a wide range of activities that call for specific light settings.  Overhead lighting should be installed as part of the initial room design.   Oftentimes, a standard grid lighting pattern does not work well with your seating and furniture layout, so it is best to draw up your lighting design in the initial stages of planning.

NOTE:  In general, recessed cans should be installed 30 inches away from the wall and 4-5 feet apart.

Track heads, recessed and/or rail lights should be strategically located so as not to create glare or cast unflattering shadows upon individuals in the room.

Rail lighting from WAC Lighting highlights artwork;  hanging pendants provide soft ambient illumination and artistic accent light.  Rail and track lighting are highly versatile and allow for easy adjustments if you decide to change your decor.

2. Wall Lighting: Wall lights work well in a media room as they expand the space and provide an evenly distributed balanced illumination.

Image from HGTV.com “Must-see Media Rooms”

“Jaxon” wall lighting from Troy Lighting, available in a variety of color options

3.  Portables:  From sturdy reading lamps to decorative table lamps, portables are a useful addition to the multifunctional media room.  They provide individualized task light, as well as general illumination throughout the room.

Room design by Sandra D’Amata International

Ambience table lamp (shown above), Frederick Cooper “Script Reader” floor lamp and Minka-Aire’s “Great Room” fan from Capitol Lighting

4. Control Systems:  Dimming and automated control systems are a must for the media room.  Even if you have programmed your lighting controls into your Smart phone, wall switches with a variety of room settings and dimming capabilities are a good idea and are available in a choice of colors to complement your rooms’s decor.

Dimmer switch from Kichler Lighting

5. Special Considerations:  LED bulbs and LED light fixtures are suitable for media room lighting designs, just be careful to choose all your light sources with the correct color rendering, color temperature and shielding. Look for LED light sources that are dimmable and in warm (2700K)  color temperatures. *

LED torchiere floor lamp from Holtkotter

* Solid State Lighting and LED light sources are being refined so that predictable color rendering and color temperature will be more visually accurate.  A new metric to measure LED illumination is in the works:  The Color Quality Scale (CQS) will help to identify the visual characteristics of LED light sources more clearly, but right now–a bit of trial and error may help you find LED light sources that are complementary to your media room’s decor.

3 Keys to Remember:

*  Avoid having sharp areas of contrast between dark and light–illumination should be evenly dispersed with slight variations that allow your eyes to transition from reading a book, conversing with friends or watching  TV.

* Make sure lighting/fan controls are easily accessible–opt for a remote control system in addition to wall switches.

* Go for the most energy-efficient light sources, but do not sacrifice the overall look of your room.   If you are not using fluorescent or LED light sources, opt for eco-halogen or top quality incandescent bulbs in portable light sources.

In the late sixties, and early seventies aluminum wiring began to be used because most available copper was going to the Vietnam war effort. However, aluminum wiring is not ideal for small home electrical systems.  The electrical devices at that time were not designed to handle the high temperature coefficients of aluminum wiring. Aluminum wires can also expand in diameter and length as they get hot, they can actually back out the screw terminals, causing a loose connection. This, in turn, can cause heat, which can ultimately lead to a fire.

After problems with aluminum wire termination became known—including one notable house fire—the UL (Underwriters Laboratories) and other agencies adopted new safety regulations and put more restrictive standards in place. However, many homes from the 60s and 70s still do not have safe aluminum wiring terminations. But there are a number of ways to solve this problem without having to rewire a home.

Consumer Safety Council Recommendations

According to the Consumer Safety Council, there are only two approved methods that splice aluminum wire to copper wire:

These standards have caused acceptance problems with home inspectors and insurance companies, which has led to homeowners paying 2 to 4  times as much as they should to have their aluminum wiring terminated.

Florida residents, it happens to all of us more often than we’d like. A storm, hurricane, or other catastrophe causes our lights to flicker and the power to go out. Power loss doesn’t just affect the lights—food can begin to spoil in your refrigerator and freezer, cell phone batteries die and are unable to be recharged, furnaces can’t keep your home and your family warm, and hot water to bathe, cook, and clean becomes limited. The list goes on and on. The next time a storm knocks out your power—again—you may find yourself thinking about investing in a standby generator to help you weather the storm.

There are many benefits of installing a standby generator in your Tampa or St. Petersburg home. Unlike a portable backup generator, a standby generator is doing just that—standing by, awaiting its turn to provide power to you and your family. Differences between the two power generators include: