It is a cold October evening and you are preparing dinner. You are in full motion with all your appliances working overtime to get the meal done as soon as possible – and the power shuts off. Not only are you frustrated because you are set behind schedule but now you have to try to fix the problem. This happens to people on a daily basis and is a nuisance that can be avoided with the right electrical usage and correct setup. Lets walk where you should go from here.

As we have discussed in the past, the electrical panel (or breaker) is an integral part of the home’s electrical system. It regulates all incoming electricity and manages it throughout your house. When a breaker shuts a circuit off, or it “trips”, it is protecting you and your home from a potentially dangerous situation. The breaker will shut off that circuit because it has detected high voltage, high temperature, or another internal problem. If the breaker does not trip the circuit that is affected can overload and create an electrical shock or electrical fire.

To get your electrical breaker back on, identify the circuit that is in the off position and flip in back to the on position. With a properly labeled electrical panel it can be easy to quickly identify the affected circuit. If the breaker feels hot the touch or the circuit immediately trips again, do not attempt to turn it back on and call an expert electrician. Sometimes a circuit could trip due to a high amount of usage and may only be a minor problem with no repercussions. But if the breaker immediately trips when turned backed on or it trips regularly, there is a larger cause and the problem should be addressed as soon as possible.

There are a number of reasons why breakers could trip. The circuit that is being turned off could potentially have too much load and being overloaded. There could also be a problem in the wiring itself that is causing electrical surges and shorts that the breaker is detecting. It could also be a problem with the breaker itself. The panel may be old and reaching the end of its functionality. It may be time for the panel to be replaced.

It is not a good idea to keep turning on your breaker if it continuously trips. If you cannot identify a pattern in your routine that is causing the trip you should contact an Expert Electrician. They will be able to tell you if the problem is originating from the wiring or within the panel and even fix the problem for good.

Don’t put up with tripping breakers, it will become more than just an inconvenience. Get the right help and have peace of mind that your home is safe and dinner will get finished on time.

Your business’ lighting is critical to its success, and with commercial lighting rapidly changing, you could be light years behind the times. Don’t let your business be left in the dark. Take advantage of the perks of modern lighting!

Buildings constructed just 20 years ago harbor energy-hogging lighting systems in dire need of replacement.  Consider computers built in the 80s and 90s versus today’s models, and that will give you an inkling of how far behind the times your lighting systems are - and you’re not alone. According to the DOE, more than 75 percent of buildings are over 20 years old, collectively wasting more than $50 billion annually by holding on to antiquated lighting systems.

Depending on your business type, 20-50 percent of your electricity budget is sucked up by lighting demands. This means energy-saving improvements could really help manage costs. In fact, with continually improving bulbs, fixtures, and controls, lighting typically provides the highest return on investment among major upgrades. The right combination could pay for itself in three to five years, and save you 25-50 percent annually on lighting energy. How much could you save?

Talk to your Mr. Electric® professional to learn more about benefits and incentives available in your region, including:

The experts at Mr. Electric can help you get things all figured out, from the best lighting options for your business to cost. Our experts have what it takes to assess your current lighting system and needs, damaged/outdated/mismatched systems, inefficiencies in energy use, necessary light levels and color, under-lit areas, and more, to find lighting solutions perfectly matched to your needs – and your budget!

Have a bright idea about your business’ lighting? Contact Mr. Electric today.

Out with the old and in with the new should never end with your used electronics in a landfill. A growing concern across the globe, electronic waste, or e-waste, is rapidly creating a crisis. Only 11-14 percent of electronic waste in the United States ready for disposal is actually recycled or reused, while the remainder is creating environmental and health issues worldwide.

Don’t have time to deal with your e-waste? Don’t dump it. Contact Mr. Electric today. Proper disposal and recycling is essential to preserving our environment and the health of future generations. With the help of HirePatriots and Mr. Electric, we can quickly and responsibly handle all of your electronic waste needs.

Many people enjoy a fun or interesting hobby as an enhancement to daily life. Some hobby activities don't require much space while others need gear and perhaps a designated area to be performed. Collections, by their nature, need plenty of space for display and enjoyment, while conducting artwork needs specialty tools and storage space for them. Whatever your favorite hobby might be, if you've ever considered making a designated room for it there are a few things to plan ahead for.

Home Addition or Finishing a Basement or Attic Space?

With some home designs you may be able to turn a guest room or bonus room into a space for hobbies. In other houses, you may need to hire a contractor to make an unfinished garage, attic, or basement into an area for your hobbies. If you have a smaller house or a particularly dedicated interest, you may decide to build an additional room to your home which will be specifically for your hobby activities. No matter which plan best suits your needs, you'll need to make sure you have plenty of electric access for lighting and any tools you may use with your hobby.

Adding Electric

Security lighting is a great way to protect your home from intruders at night—but only when it’s working properly! Malfunctioning security lights may stay on longer than they’re supposed to, not turn on when they should turn on, or face a number of other problems that prevent them from working effectively. The following is a guide to troubleshooting security lights for some of the most common issues people face. Here’s what to do if you have the same problems!

Motion sensor lights are designed to come on when they detect movement and shut off after a few minutes when everything stops. But sometimes, motion stops and the lights stay on—usually as a result of a spike in current.

The first step in troubleshooting security lights with motion sensors that won’t shut off is to check if the time interval has been changed. Most motion sensors allow you to set a length of time for the light to stay on, usually anywhere between 30 seconds to 10 minutes. If the interval has been changed and the lights are staying on for too long, change it back to the time you want.

If that doesn’t work, go outside during the day and see if there’s anything in range of the motion detector that might be constantly moving, like a flag or even an animal nest (you might even look outside at night and see if you can see anything). If you don’t see anything, try shutting the lights off at the breaker, then restarting them.

Lights that won’t shut off are bad enough, but what about lights that won’t turn on? One common reason this happens is that artificial light is coming in from another source and is mimicking daylight, preventing the sensor from activating properly. Try to find where the light is coming from, and cover or change the direction of the sensor to avoid the light.

The underlying issue behind constantly flickering lights may vary depending on a number of factors, including whether the problem is only occurring with a single bulb or more than one at a time. If it’s only a single bulb, carefully check it to see if it’s secure in its fitting. If it is, try replacing it with a new bulb. If that doesn’t work, call an electrician for a security light repair.

This one isn’t as common as the others on our list, but in the past we’ve had customers whose security lights have been faulty when the weather was damp, rainy, or snowy. This is usually the result of low quality motion sensors, which can be temperamental in very hot or very cold weather. The certified, DC-area electricians at Kolb Electric recommend spending a little more upfront to get a quality product that you’ll be able to rely on for years with little need for security light repair.