Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

We can install and maintain smoke detectors on your residential or commercial premises. For more information, contact the Allround Electricals team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

Older homes have their charm, but as anyone living in one can tell you, they also come with more than their fair share of issues. Building and electrical codes have changed dramatically over the years, and our everyday electrical demands have continued to skyrocket. At Kolb Electric, we don’t want to discourage anyone from living in the home of their dreams.  That said, we do want people to be safe, so if you currently live in or are thinking of moving into an older home, here are some things you should be on the lookout for.

Electrical wires can function for a long time, especially if they haven’t been damaged and if the insulation hasn’t become brittle and flaked off. Even knob and tube wiring, an old standard for wiring that hasn’t been used in years, can still keep the lights on. Age does catch up with wiring eventually, however, and if the insulation fails, by becoming abraded, being chewed, or any number of other reasons, a short or electrical arc could start a fire.

Older homes often have wires surrounded with a spiral metal jacket. Metal-clad wires are still used today, especially in areas where the wire is exposed to potential damage. Armor-clad wires are distinct and do not have a separate ground wire within the metal sleeve, instead using the sleeve itself as the ground. As a result, for fire safety reasons, armor-clad wires are often barred in new construction.

If you can see obvious signs of a problem, including scorch marks on terminals in switches and outlets, missing or damaged insulation or any other signs that look potentially dangerous, you should call Kolb Electric for home rewiring before you expose your home to a live wire.

Restoring old chimneys and relining flues are common expenses of owning an older home. Here’s what happened: as coal started to become readily available, existing homes were retrofitted with central heating systems. Nowadays, most coal-fired systems have been converted or updated for oil or gas, but many are still vented into unlined chimneys. Where chimney liners are present, they are usually made of terra cotta and can rapidly deteriorate with higher-combustion, energy-efficient heating equipment.

When evaluating a heating system, make sure you consider its age, type, condition, and efficiency. For example, an old cast iron boiler may last a century or more, but updating to a more modern system can reduce your future heating and maintenance costs.

Old plumbing systems are notorious for being a mish-mash of old and new materials, especially as additions are added to the home or kitchens and bathrooms are remodeled. Iron and lead piping can become clogged with corrosion and mineral deposits, and typically need to be updated in sections. Cast iron piping is even worse, and can corrode from the inside, becoming thin, pitted, and cracked. Horizontal sections are usually the first to go—especially if chemicals drain cleaners containing sulfuric acid have ever been used.  Unless the home has already had repiping done, you can almost guarantee you’ll need to do it yourself.

Unless your roof is under 80 years old and / or is made of slate, you can bet it’s probably not original to the home. There are numerous types of roofing materials, all with unique life expectancies and maintenance requirements. Many older homes have multiple additions with roofs of different ages and types, so like the plumbing system, individual sections may need to be replaced.

If you’re moving into an older home, make sure you have it inspected thoroughly beforehand to make sure it’s safe. And if you need electrical maintenance in Maryland, Virginia, or Washington, DC, call Kolb Electric today!

Spring and summer are traditionally the busiest shopping seasons for potential homeowners. With the current housing stock dwindling as buyer demand increases going into the warmer months, a seller's market has emerged across the country, giving residents looking to unload their current properties the upper hand in negotiations. However, even with the advantage laying in the hands of owners, a closing can still get derailed - or at least made less-than ideal for a seller - when a buyer hires a home inspector to come investigate the property.

In many cases, these contractors will unveil deficiencies in the property that even the homeowner didn't realize existed, causing the prospective purchaser to demand a slash in the asking price. Often, the amount of money that these home inspections cost the seller on a closing exceed the price it would have cost them to be proactive about minor fixes in the first place.

Before putting your home on the market, have a home inspector come in and evaluate your property to check for the deficiencies that potential buyers will be watching out for. Simple things like the water heater being outdated - or even not positioned correctly off of the floor - can be caught, allowing you to preemptively address them before the open house.