By Spencer Cutright

Let’s face it: no summer vacation is complete without plenty of pictures. With the invention of the “selfie stick” and apps like Instagram and Snapchat, taking pictures has never been so user friendly, and photography has never been more prevalent than it is today.

However, this would not be possible if flash photography had never been invented. It’s hard to believe, but flash wasn’t always as common or safe as it is today. Here is a brief look at the history of flash photography.

Flash photography originally began as an unsafe and incredibly intricate device known as the flash lamp, which was invented in 1899. Photographers would fill a pan with flash powder, which was then ignited, leading to a small explosion that produced a quick flash. The flash lamp is known for being very unsafe, and many photographers who used it were either killed or injured in the process.

Around the 1930s, flash bulbs replaced flash powder. Oxygen-filled bulbs were electricity ignited, producing a quick bright flash. However, the bulbs could only be used once, and they were often too hot to handle right after the flash.

Thirty years after the flash bulb, the cheaper and more efficient electronic flash was invented. Electronic flashers are often attached to a camera and produce an instantaneous and very bright flash through a flash tube when a picture is taken.

Found on camera phones as early as 2000, LED flash uses high current LEDs to produce a quick flash when a picture is taken. LED flash makes flash photography efficient and miniaturized.

So next time you pull out our camera or smartphone to capture a special moment this summer, keep in mind all the inventors who made modern photography possible.  The future of photography is certainly bright with many possibilities ahead.

An electrical circuit works as a loop where electricity flows from a source and then returns to that point again after powering the device connected to it. The power flow interrupts or stops if the path is broken. There are also receptacles, fixtures, or switches joined to the course through different types of electrical wiring.

Every electrical circuit has a specific breaker or fuse that controls it. Inside the main electrical panel of your house, you will find reference numbers to identify which breaker or fuse is assigned to which circuit. Mapping of them is a standard electrical safety procedure.

power company supplies electricity to your home through the transmission and distribution lines. The energy enters the service panel, also known as the fuse or breaker box, after passing through a meter. Then, the box has three wires (hot, neutral, and ground featuring insulation of different colors) that do the jobs of transmitting the power to an external outlet, returning to the source, and providing the ground.

The wires of your home are generally installed in three ways:

It’s a wiring system where a single electrical circuit supplies power for several devices. There are various housing boxes from where both hot and neutral wires emerge and run along the route. They branch off to single receptacle and fixture.

It’s the most common of all the systems seen in residential settings.

Switch Wiring

Installed on hot wires, such a system has switches that either transmit or break the current flow to various devices or lighting fixtures. A switch changes its position to allow or interrupt the flow of electricity to electrical machines and instruments.

The system routes the hot wire through various fixtures before joining to the neutral one, which then carries the power to the source. It’s the least used and most inconvenient of all the types because it connects the devices, i.e., lights in a series. So, the circuit breaks off when just one light is burnt out.

Parallel wiring is the best option for household settings because it does not break even when one of the connected fixtures goes kaput. Nevertheless, remember not to run too many electronics from one source because each circuit can carry only a maximum electrical flow.

Planning on an exciting and colorful lighting display this holiday season? Whether you have grandiose plans of intricate illumination design, or you just want to wire up your tree, hanging lights can present a few hazards to the unprepared. Electrical safety may take a backseat for some, but to the experts at Kolb Electric, nothing could be more important! Protect yourself and your home with these light hanging tips.

As you may expect, much of electrical safety has to do with the product being used. Keep these tips in mind when selecting your lighting choices this year:

If you plan on hanging wiring above eye-level, odds are you’ll be using a ladder. Remember these tips when hanging your lights:

Have any questions or concerns regarding your holiday lighting this year? Contact us today at Kolb Electric! We provide industry-leading solutions for all of your electrical needs, and bring only the very best in service and skill to our consumers!