Do you own electrical equipment that is overheating? If you’ve noticed any of your electrical devices, like a toaster or a radio, overheating you may have a serious electrical problem on your hands. Fortunately, at Kolb Electric, we have just the tools to diagnose and fix the problem.

Overheating of electrical devices can be caused by a number of problems. From faulty wiring to an outdated electrical system, it’s important to get to the bottom of an overheating electrical device.

At Kolb Electric, we offer thermographic inspections for your home or business. A thermographic electrical inspection will test the equipment’s temperature against the temperature of surrounding components. Significant variations in temperature indicate electrical problems in your appliances and equipment. Temperature abnormalities are often due to defective or failing components. By catching problems early on, they can be corrected before they can cause even greater damage later.

If you manage a home-based business that relies on several pieces of electrical equipment, it is especially important that you routinely schedule thermographic electrical inspections in MD, VA, or DC in order to prevent your important equipment from malfunctioning.

A thermographic inspection is completely non-contact and safe to perform on energized electrical systems. Thermographic electrical inspections can be conducted while your equipment is still in operation, which means you won’t lose time by having to shut down your equipment.

When combined with traditional home inspection techniques, the infrared thermography inspection method reveals considerably more about your house than can be seen with conventional inspection tools. Some things our infrared thermography inspections have detected include:

Water leaks: using an infrared camera to scan the inside of your home can reveal moisture leakage around plumbing systems, the roof, any windows, etc. We’ll be able to see them because areas with more moisture will appear darker than surrounding warmer, dry areas.

Insulation deficiencies: our scanners will reveal large temperature differences within your home where insulation is deficient or absent.

Roof leaks: we’ll be able to spot water and moisture intrusion and accumulation below the surface of your roof, which can help you pinpoint leaks and lessen their effects before they do major damage to your home.

Electrical system problems: one of the best things about an infrared thermography scan is that it helps you see any deficiencies in your electrical system, including loose connections that could cause certain appliances to run inefficiently (or to not run at all).

Structural issues: finally, infrared thermography scans will help locate structural issues within your home, including poor heat transfer, bad conductivity, and more. We may even be able to detect missing or damaged structural components.

For all your infrared thermography needs in Maryland, Virginia, and Washington, DC, contact the electricians at Kolb Electric today—877-287-1179877-287-1179 or click here!

One of the most devastating things that can happen to your business is an extended loss of power. Without power, you lose valuable business hours and revenue. Business interruptions of this nature are not necessary though, even if it’s the result of a strong snowstorm.

Being well-equipped with a quality commercial generator is essential to keeping your business running effectively and efficiently during a severe power outage. Understandably, you may have questions before purchasing such a system. We’ve tackled a couple of our most frequently asked below.

Every commercial property is different, and therefore your needs will be different as well. Your generator will be sized on the electrical load that it will be tasked with carrying. The actual square footage of your building does not play a factor in this, as it would for an HVAC system or commercial water heater.

Your new generator must meet your specific requirements so that it’s able to do its job without accumulating undue stress on the unit or damage to the devices connected to it. Accurate sizing involves a number of factors and considerations, which our service professionals are happy to assist you with.

If your commercial generator is well-maintained and used properly, then it will run as long as fuel is being supplied to it. How often it needs to be refueled will depend on what type of tank you have. Some commercial generators are supplied with a 24-hour fuel tank, although 48-72 hour fuel tanks are also available.

Additionally, unless your business or commercial space deals with food that could spoil, it’s recommended that you turn your generator off during non-business hours so that the engine can cool. This is particularly helpful during long power outages as it helps your system avoid unnecessary wear and tear.

Whenever looking at electrical devices or equipment, many people are confused by the difference between amps and volts, making it difficult for them to understand the purpose of each. By learning what each of these important electrical terms means, you can better use your electrical devices in a safe manner, which will help you avoid any electrical shocks, tripped breakers or other electrical mishaps.

Amps

One of the easiest ways to understand the difference between these electrical terms is to look at them from a more physical viewpoint. In order to do this, we will compare each with its plumbing equivalent. Imagine water running through a hose. Simply put, amps are just like the water that is flowing through the hose.

Volts

The amount of water running through a hose depends largely on the pressure that is forcing the water through the hose. In electrical terms, the amount of pressure forcing electricity through the wire is referred to as Volts. Whenever you combine the two, and multiply Amps x Volts, you get Watts. Watts would be the equivalent of the amount of electricity that is coming out of the wire at any given moment (Amps) and the amount of pressure pushing the electricity through the wire (Volts).

One of the most important reasons to understand these terms is to keep them in mind when using several different devices and appliances on a single circuit in your home. Each circuit in your home is protected by a circuit breaker that is designed to shut off the flow of power if the circuit becomes overloaded. By understanding how much electricity each appliance is designed to draw, you can more safely and effectively spread your appliances across your circuits.

If you notice that you have a circuit that is frequently tripping, or showing other signs of power drain, call an electrician right away. This could be a sign of deeper issues. If you are interested in more information about this or other electrical topics, our team at The Electric Connection has put together a solid list of related tips and articles in our website.

just 15 years ago. I wonder if any of the attendees at COMDEX thought to themselves “One day, I can cook my steak with the help of a tiny glowing tool that changes colors when my meat is cooked to perfection.” Probably not. Thankfully Sharper Image did, so now you can cook your steak and monitor it from your smart phone.

Halloween is less than one month away! If you’re thinking of decorating your home for the holiday, nothing can help turn your house into a festive sight like lighting. In minutes, you can turn your quaint cottage a ghoulish green, make your bungalow glow orange, or paint your front lawn an eerie yellow. Suddenly, your charming home becomes mysterious and thrilling to trick-or-treaters and passersby.