Are you impressed by the nation's current lineup of efficient electrical appliances and devices? You ain't seen nothing yet, according to the U.S. Department of Energy. The DOE recently released a report previewing some of the big technological breakthroughs that are poised to help you get the most out of your residential electrical work. These advances promise to reduce the energy consumption of the average household while still delivering effective performance. Read on to learn what your next refrigerator, clothes dryer and lighting system could look like.

More Efficient and Effective Electrical Work

The Department of Energy predicts the following leaps forward for some of our commonly used appliances:

Cut Back on Energy Use Sooner, Not Later

Don't wait until the future to beef up the efficiency in your home electrical work. For help identifying opportunities to cut back on energy use, contact a licensed electrician to conduct a thorough energy efficiency audit.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

They are lights that rely on LEDs (a light-emitting diode) as their source of illumination. In a majority of the cases, the lighting stems from either a fluorescent or an incandescent light bulb. LED lights have a good reputation for being a lot more efficient than traditional light bulbs, and they can also be inserted into more traditional lamps and light sources, where they may be utilized as other regular light bulbs.

If you are a consumer in the market for some lights, you should understand that there are a bunch of benefits that the consumer will obtain by choosing these kinds of lights over other sorts of lights available on the market. For one thing, these sorts of lights are known to consume a lot less energy than other kinds of light bulbs, and they are known to be as much as 300 percent more efficient than a CFL or a compact fluorescent light. In addition, LED lights are up to 1000 percent more efficient when compared to an incandescent light bulb. They come with an extremely long life, relatively speaking, which translates to around 50,000 hours of usage at approximately 50 percent of their initial power, according to the Wise Geek website, anyway. If you want to work this out in terms that are more practical and applicable to everyday life, you can think of it in this way: This will equal around 8 hours per day for some 13 years at approximately 70 percent of power. By way of comparison, you should realize that the average 60-watt incandescent light bulb will only last around 1000 hours!

Furthermore, in terms of pure safety, LED lights can’t be beat. Here is an example of that. Consider this: These types of lights come without any toxins such as mercury or other unsafe materials. In addition, they are also known to be free from any emission of ultraviolet or UV heat, thereby failing to attract any insects, which is very much a welcome piece of news to people who are troubled by pesky insects! Further, these sorts of light bulbs fail to produce a lot of heat, meaning they are cool to the touch.

Of course, not everything with these kinds of lights is advantageous. For example, the price tag on LED lights is quite high, and they are known to be heat sensitive. This means that these sorts of lights can either fade or stop working altogether if they are not utilized with either a consistent or a steadfast current. Finally, utilizing them as a part of room lighting may be unbeneficial, too, since they are meant to be utilized more for room lighting situations.

In all the hustle and bustle of the day, it’s easy to get sidetracked or to not pay close enough attention in the kitchen. In a matter of just a few seconds, your kitchen can go from being the heart of your home to being a disaster zone. Every year, there’s a significant spike in home fires on Thanksgiving and Christmas. Ensure the safety of your family by following these tips!

We know that today may be incredibly busy for you, so we wanted to do our part to help make it easier. We’ve created a printable graphic that you can pin to your refrigerator to remind you of the important tips you need to follow.

Custom Electrical Services has electricians in Adel 24/7 365.  Not only do our electricians service Adel, some live there.  They are embedded in the community, participate in activities and are proud to be apart of Adel Iowa.  If you are looking for some electricians in Adel for you next electrical project or electrical emergency please do not hesitate to give us a call no matter what time of day or night it is.  We are experts in older and existing wiring.  We also wire 300+ new construction houses each and every year.

At Custom Electrical Services we understand that not all electrical emergencies happen during the day.  We understand that you may be experincing an electrical emergency at night or on the weekend.  If you have an electrical issue that requires immediate attention please do not hesitate to give us a call.  Our electricians in Adel will help you no matter what time of day or night it is.  Our service vans our fully stocked, some

even call them a warehouse on wheels.  Even if we do not have the part you need on our van we have 24 hour access to all the major electrical wholesale warehouses in the Des Moines metro.  If we do have to go get a part you wont be charged anything additional.

Review – Adel Customer

We work extremely hard to make sure you are 100% satisfied.  That is why we offer a 100% satisfaction guarantee as well as a 5 year warranty.  We understand that your home is your castle and we want you to enjoy your experience with us.  You can see some recent reviews here, or you can click on the review link on the home page of our website.  At Custom Electrical Services our slogan is “Dedicated to Customer Services and Electrical Excellence”.

Everyone needs to be safe.  You need to know you will be safe with the person coming into your home.  Also, the work they will be performing needs to be safe.  At Custom Electrical Services we are not just going to send any electrician into your Adel home.  We will send the best one available.  Our electricians are full time team members, not sub contractors.  All of our electricians undergo a thorough background check as well as a drug screen.  Our electricians in Adel proudly wear the Seal Of Safety badge and wear it with honor.  All of our electricians are uniformed, professional, and courteous.  They take pride in there work, clean up after themselves and won’t leave until your 100% satisfied.

We do most anything electrical!  What every your electrical needs are chances are we do it.  We can repair or replace old and damaged wiring as well as wire that brand new custom home.  Any size project is welcome from hanging a ceiling fan or replacing one outlet to rewiring your entire home and everything in between.  We also have bucket truck services, trenching, and can install, sell, and service any backup generator.  Our electricians in Adel will be glad to help!  From the simplest of projects to the most lavish, we will help you every step of the way.