These LED lights attach easily to the front and rear of your bike. The white light clips to the front break cables to help you see where you’re going, and signal to others that you’re heading their way. The red light clips to your seat rails, brightly marking your bike’s rear. They both operate in steady beam and continuous flash modes, visible from up to a mile away. They’re weather resistant and have a long battery life.

2. Twist On Bike Lights

The electricity you use to power your home is most likely generated by burning coal, with some nuclear and natural gas-fueled current in the mix for good measure. However, that could all be changing, and faster than anyone expected. While renewable fuel sources like solar and wind power make up only a small part of the nation's electrical grid today, wind could actually be the leading source of electricity in little more than three decades.

Viable and Competitive

Wind could surpass other sources and provide as much as a third of the United States’ electricity by 2050, according to a report by the U.S. Department of Energy (DOE) Wind and Water Power Technologies office. Wind currently weighs in at only 4.5 percent of the supply, but if projections hold, that will increase to 10 percent by 2020 and 20 percent by 2030.

“The wind industry can be characterized by the substantial growth of domestic manufacturing and the level of wind deployment seen in recent years,” José Zayas, director of the DOE Wind and Water Power Technologies office, said to EcoWatch. “Wind power systems are now seen as a viable and competitive source of electricity across the nation. Wind power’s emerging role is an important option in a portfolio of new energy solutions for future generations.”

Benefits to Public Health, Environment

Should the prediction of wind's dominance come to pass, it would have numerous benefits for the environment and for consumers. Even at current levels, wind has reduced water consumption by 36.5 billion gallons and carbon emissions by 115,000,000 metric tons compared to traditional power sources, according to the government.

That means a lot less carbon getting released into the atmosphere, helping to slow our contribution to climate change. Plus, once the infrastructure is built, wind is free to harvest, and doesn't have the same environmental tradeoffs as coal and natural gas. The benefits “can address key societal challenges such as climate change, air quality and public health, and water scarcity,” the report said.

Uncertainties Looming

The rosy projection is just that. There are numerous uncertainties that could affect how well wind power actually does in the future, including government policies to incentivize wind or decentivize coal usage, the supply and price of natural gas, and the demand for electricity overall in the United States.

The technology around wind generation will have to hold its own as well. Growth in market share depends on continued advances in efficiency, more transmission capacity and better weather forecasting so we can best take advantage of favorable gusts.

Global Optimism

Should the growth of wind continue as predicted, there could be hope for a cleaner, healthier future. And what's good for the United States can be good for the rest of the world as well.

“The global energy market of the future is poised to be the largest market the world has ever known,” Secretary of State John Kerry said in a speech about wind power. “Pursuing cleaner, more efficient energy is actually the only way that nations around the world can build the kind of economies that are going to thrive for decades to come.

Have you ever been sitting there reading a book and noticed the lights flickering? Maybe you thought it was just your eyes or it didn’t really happen. It wasn’t your eyes. It was very likely your lights. So, why do your lights flicker? A Beverly Hills electrician is here to explain flickering lights and what it means to you and the safety of your home. You can always call the professionals at The Electric Connection if you have more questions or concerns about flickering lights.

It is important to check to see if it is just the light in the living room that is flickering or if it is lights throughout the house that are getting darker and brighter.

Some reasons that your lights flicker are as follows.

1-Bad weather. If there is strong winds or a lightning storm raging, your lights may flicker. This is normal and often an indicator the power may go out.

2-Power to the house is fluctuating. The problem may be with the power coming into the house. You may notice flickering lights during peak hours. This is because there is a higher demand on the power grid than what the grid can handle.

3-If it a single light that is flickering, you may have a problem with the switch or the wiring to the light fixture. This is something that needs to be investigated by an electrician. Beverly Hills homeowners need to understand that a single flickering light is often an indicator of a bigger problem. The bigger problem can lead to an electrical fire.

If you have noticed a single light or random lights flickering at different times, it is a good idea to have an inspection performed by an electrician. This will tell you if there is a problem you need to worry about or you if you simply have a bulb that needs changed. Give The Electric Connection a call today and schedule your inspection.

This summer is already heating up and it is time to make the best of the warm weather. It is an excellent time to enjoy the outdoors while relaxing alone and with friends. Sitting on your patio is nice, but imagine sitting on your patio in a tub of hot, bubbling water. A hot tub is a luxurious way to unwind after a long, hot day at work. Sitting on your patio in a hot tub and watching the sun go downs is a little slice of heaven, right here on earth. If you are ready have your own hot tub installed, you will need to contact your local Burbank electrician. You can count on the team at The Electric Connection to help you get your new hot tub up and running.

You will want to visit your local hot tub dealership to pick out the perfect one for you. There are various sizes and styles out there. Once you have decided on the hot tub, it is time to call an electrician. Burbank residents will need to determine where the hot tub will be placed. There are a few things you will need to consider before you schedule your installation. Because your new hot tub will need electricity to operate, you will want it somewhat close to your home to avoid the electrician having to dig a long trench through your yard.

Once you have determined where to place the hot tub, it is time to schedule delivery. An electrician will hardwire the hot tub to your home. You will need a new breaker installed to support the 240-volt outlet required to run the hot tub. Depending on the status of your current electric panel, you may need an electric panel upgrade. Your electrician will do a quick inspection and let you know what is needed. Give The Electric Connection a call today and schedule your hot tub installation.

Whenever you have a short circuit, it means that there was an accidental path created in your existing circuit, which generated a connection that was not there before the short occurred. Electricity will always follow the path of least resistance, which means that it will almost always follow this new path, rather than its intended path. This typically results in an abnormally high level of electrical current. The most common type of short is when two bare wires cross, such as when old insulation deteriorates, causing a loose connection which allows two wires to touch.

An electrical short is not something to take lightly. This increased current generates a great amount of heat, which can lead to sparks and fire. One way to identify an electrical short is by hearing a popping sound whenever that particular circuit is turned on. This is the sound of the electricity taking the path along the new connection that it has found, causing the circuit to experience a sudden overload. Smoke, flames and melting fixtures can follow, leading to larger fires and risk of shock in the immediate vicinity.

Another common source of electrical shorts is improper wiring. This can occur if the metal lining of a particular switch or outlet touches one of the wires. An electrician in Burbank must always find and fix shorts caused by damage, such as storm damage.

The most important thing to do whenever you have a short is to address it immediately. Because of the potential severity of this situation, call an electrician right away to have them inspect and fix the problem for you. A short left unrepaired can lead to more extensive damage, resulting in a much higher cost than if you had fixed the problem whenever it was first detected. For more information on electrical troubleshooting and our services, visit our main page (Click Here).