If you are considering getting a spa installed on your property, there are a number of aspects that need to be taken into account in order ensure that the feature is safe and functions properly. After all, a spa has a lot of water and moisture and electrical safety is something you can’t overlook in this space. Here are a few helpful spa wiring and installation tips:

When you buy your new spa, you need to ensure that you have all the necessary permits required for the installation. Most local councils require special authorization for all exterior electrical circuits as well as for any new construction (in case you decide to build a shade structure to cover the spa). In addition, there may be some other requirements that you’ll have to follow, like positioning the spa in a specific location etc.

When choosing a foundation for your spa feature, you should choose a place that will have proper drainage when it rains. If you are planning on installing your spa on an existing patio or deck, you should ensure the structure is solid enough to bear the weight of the water and the spa itself as well as the people that will use it. If you are planning on installing the feature on solid ground, make sure the spa is elevated on 100% foundation such as concrete and gravel.

There are several different types of spa models you can choose from, and, while these may all be unique in styling and build, most spas are built to run at different usage and power levels. Here are a few points to keep in view:

Tangled wires are a pain in the neck. That's true whether you're managing multiple devices at your computer desk, trying to find space at a cluttered kitchen counter or juggling power tools at your workbench. One way to bring order to chaos is to create an overhead power strip, a project you can DIY with some very simple electrical work. Read on for some tips to get started.

A Simple Solution for Your Electrical Work

To create the most basic version of an overhead power strip, all you really need is a piece of wood, some screws, and a mountable power strip (look for one that has slots for screw heads in the bottom). For added convenience, a plastic raceway or access to a router tool will be helpful to secure the power strip's cord to the wood.

The first step, in that case, is to either use the router to cut a slot in the wood that can hold the cord, or attach the raceway to the wood for the same purpose. Make sure you leave room to attach the power strip itself, and there is enough cord left at the other end to reach the nearest outlet.

Securely Installing the Strip

Next, measure how far apart the screw slots are on the back of the power strip, and mark the distance out on the wood. Install appropriately-sized screws at the marked spots, leaving some clearance under the screw head so the power strip can easily slide on and off. Test out the setup and make sure that the strip fits and can hang securely upside down – if it's loose, you may have to adjust some of the screws.

Finally, you need to decide how to mount your overhead power strip. Options include hanging it under a kitchen cabinet or shelf on the workbench, affixing it to a wall, or using a post to hang it closer to the center of a room. Remember, this power strip is for your convenience, so you want to position it where it will be most useful.

Customize the Power Strip to Your Convenience

Of course, once you get the idea for how to hang a power strip, you can then customize it to your liking – for example, putting a hinge on the end allows you to swing it back against the wall when you aren't using it. You can also branch out with many of the modern, innovative power strip models on the market to customize your workspace even further.

For help keeping your cords in order, or assistance with any other electrical work, contact an expert electrician today.

With all of the Read more on retrofitting vs replacing here.

Undeniably the best technology for any business is a LED retrofit. Why is this? For many reasons:

What is LED Retrofit and it’s Benefits?

LED Retrofitting is one of the biggest lighting upgrades building are doing these days. Companies want to get rid of technology like LED with retrofit kits can bring along many is an organization that tests lights and either deems them of being quality and efficient or not. If your industrial lights you are inquiring about are not on the DLC or EnergyStar, you should avoid these at all costs.