Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.

Picking the right electrical equipment is essential no matter what line of business you’re in, so take your time with the selection process. It is especially crucial for companies in the food processing industry to pick the right cord grip and connector materials, since machinery and fittings at these plants are often exposed to harsh chemicals, water and other environmental threats, which can lead to corrosion, leakage and damage.

Electrical connectors for food processing plants normally feature corrosion-resistant properties, with different degrees of resistance for various environments and applications. Picking the wrong material will not just cause your connectors to require more frequent maintenance or repairs, but can also lead to short circuits and other safety hazards.

Twilight Designs in Las Vegas, flush mount (recessed) step lights are often the fixture of choice when used indoors. He credits this to how easy it is to cut into and run wiring through drywall, especially when installing step lights after construction is completed. “While planning ahead is helpful,” says Bilik, “there are many products available for running wires post-construction.” He recommends 110v wiring to fish through walls and attics or low voltage wiring when 110v is not an option.

For less penetrable surfaces like concrete and stone, surface mounted fixtures are ideal because they mount directly to a wall or flat surface. These step lights commonly have a profile of as little as 3/4-inch up to 3-inches and a trajectory that directs light at the wall or at the surface below.

Regardless of whether you are using a flush or surface mounted step light, you must consider the type of cover (or faceplate) the fixture has. Bilik says that in his experience, most covers will fall in one of three categories, each with its own series of benefits: