CCT indicates the hue and tone of white light emitted from a specific bulb or fixture. It’s measured in Kelvins (K), which is similar to degrees in Celsius. Different temperatures on the Kelvin scale represent different colors. For example, light at 2000K-3500K looks more orange/yellow and is called ultra warm or warm white, and as temperature increases in Kelvins, color changes to more of a “paper white” known as natural or neutral white (between 3500K and 5100K) and finally into a bluish-white known as cool white (5100K+).

As a light source’s color temperature increases, brightness often increases. While shopping for LED lights, pay close attention to the color temperatures that are available for any one bulb or fixture. Choosing a warm white bulb with a color temperature around 3000K might mean sacrificing some brightness. Whereas, if you choose the natural white version, it’s likely that it will have a higher output.

Any room can benefit from light strip, globe bulb,

In order to understand nanometers, you must first understand the electromagnetic spectrum and wavelengths. The electromagnetic spectrum is the entire range of invisible and visible light, and a wavelength is the distance between peaks of light waves. Wavelengths are measured in nanometers, which are simply units of length that indicate colors of light within the spectrum. Nanometers will tell you how red, green, yellow, purple, etc. a light source really is. These measurements start lower at ultraviolet and increase from green to blue, yellow, orange, and then red. The wavelength of a colored light can be found in the light’s specifications table.

MR16 beam angle in degrees (left to right): 36, 24, 15

Fixtures or bulbs that emit wide beams, such as BR LED bulbs for can lights are great for areas that require a lot of light, such as basements, kitchens, or living rooms. Narrow beam angles like those from can lights with MR LED bulbs are best for highlighting decor or small areas. Globe bulbs, such as G30 LED vanity bulbs, have 360-degree beam angles, which means that they throw light in all directions. Globe bulbs are the perfect choice for centralized light fixtures.

Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

via Tooshlights.com

Ultimately, Tooshlights wants to improve the public restroom experience. “We’ve all been in a public restroom with a line out the door, and no way to tell if a stall is open, occupied or out of order without looking under the door or peeking through the crack,” Tooshlights.com

Having power throughout your home isn’t something that you think about on a regular basis. In fact, when you flip the switch, you anticipate the light coming on. However, there may be a day when the power doesn’t work as expected. More precisely, you may find that the power in one room isn’t working while all other rooms are fine. What do you do when you don’t have power in one of your rooms?

The electricity that flows through your home powering the myriad of electronic devices your family owns is a system. There are numerous problems that can happen that could interfere in how the system works. Fortunately, when you have only one room without power, you can isolate the problem to that particular room.

Although there are many reasons you may not have power in one of your rooms, most of the problems will originate in the room since other rooms have power. The following are a few things you should consider when you are trying to isolate the problem.

Your breaker box is the point in your home in which you can safely interact with your electrical system. Within your breaker box are switches you can turn on and off to control the flow of electricity. When you have no power in one room, you may need to simply switch the breaker connected to that room off and then on again.

Many homeowners paint on occasion. In order to get a complete look for their rooms, they may take off the covers for their outlets and switches. If you have painted recently, then your switch or outlet may be the culprit.

Your covers hide all the wires running to your switches. If one of these wires were loosened while you were removing the cover, it could have caused the power outage.

With the long days of summer fast approaching, many homeowners are contemplating a home solar panel installation. If you’re one of them, start making plans now!

Homeowners stand to get the most energy out of solar panels during the summer months, since greater sunlight will hit them. That translates to more savings and a greater immediate return on your investment.

But people tend to pursue these solar installations when there is more sun, increasing the demand and the workload for solar installers. We’re not complaining, but it does mean that sometimes orders aren’t completed with the lightning speed we prefer. The sooner you set up an installation, the sooner we can have it complete. There are sometimes more steps than just putting panels and a system on your home. Improvements to the roof or the yard to accommodate a system of your specifications can be necessary, which lengthens the process.

The advantages of getting a jump on the competition are significant. As soon as your system is active, you’ll see immediate reduction of your power bill, leading to greater and greater savings over the years, as municipal power costs rise.

Additionally, nobody knows how long the incredible financial incentives for solar panels will last. Longstanding federal tax incentives are currently bolstered by powerful rebates and incentives offered by local authorities but they won’t last forever. If you want to take advantage of them and get a solar installation switched on before summer arrives, give us a call to schedule a consultation. We can start the planning process right away and give you quotes the same day so you know exactly what a solar panel installation will look like at your home. We’re gearing up for a busy summer and we hope to see you out there!