If you are upgrading your home’s electrical work for a renovation or remodel, then there are some truly simple ways you can elevate your new lighting to “wow” status, and now is the time to do so!

If your home is a bit on the older side, the best way to modernize is with new LED recessed lighting cans. The reason for this is simply due to the smaller nature of modern cans, which allow for a much higher ceiling than you may have. Areas like kitchens, for instance, very often have lowered ceilings to account for the room that antiquated fluorescent or recessed lighting needs to have. Today’s recessed lighting cans can fit in the space between the floor joists and the future drywall, allowing for the absolute maximum ceiling height, which immediately improves the feel of most rooms.

Do you have a dedicated entry to your home, such as a mudroom or enclosed patio? Nothing modernizes and simplifies these areas as easily as a motion-activated switch. In fact, these upgrades can be done after-market if your switch is positioned correctly using inexpensive switch replacements found at your local hardware store. The key here is that your switch has to be positioned correctly, often on the adjacent wall, which is often not the case. Otherwise, you will need to enter the room before the switch can sense your movement, which defeats the purpose in most applications. Planning for motion switches during the remodel can open up this possibility with ease.

Here is where we really get to go wild; a pressure switch may seem like a frivolity, but actually adds a great amount of value when used correctly. For instance, if there will be space between your upper kitchen cabinets and the ceiling, then adding in over-cabinet lighting creates an incredible effect; better still, piggybacking off of the circuit used for under- or over- cabinet lighting to create an interior cabinet lighting system is really not difficult to do at all. From there, simply add a pressure switch to your cabinet doors and voila, you’ve achieved a million-dollar home look for almost no extra cost if done when your other cabinet lighting circuitry is being installed. Similarly, if you’re able to reimagine your pantry with a closing door, simply put a pressure switch in the door frame that compresses when closed, turning off the light immediately, and depresses when opened to instantly turn on the light. It may not sound like much, but anyone visiting your home will be amazed by your ingenuity; plus, it takes almost no extra work to install, only requiring the switch box to be located on the corresponding portion of the wall and a small wire to snake through a drilled hole in the door frame.

The best way to achieve these and other inexpensive tricks for added value and usability is to partner with inspired electricians that are willing to make these types of suggestions. At Electrical Gurus, you’ll find the most skilled and dedicated electricians in Des Moines.

The march of consumer product efficiency continues. Modems, routers and other internet equipment are the latest items to get a bump in energy efficiency thanks to a voluntary agreement between manufacturers and trade associations. The standards mean that new equipment should use about 10 to 20 percent less electricity than the gear currently on the market. The bottom line – reduced energy bills for consumers.

Homes Across the Country

The change is ultimately expected to affect 80 million homes in the United States. Currently, the terms run through 2017 and require manufacturers and providers to make their efficiency data available publicly – ask an electrician if you need help interpreting the data or picking out the best model once the new equipment hits the shelves.

“DOE appreciates industry’s voluntary commitment to improving the energy efficiency of small network equipment, and looks forward to the progress they can make and verification of the impacts at the appropriate time,” Dr. Kathleen Hogan, deputy assistant secretary for energy efficiency, U.S. Department of Energy, said in a press release. 

Preparing for the Internet of Things

The voluntary agreement was hammered out among the Consumer Electronics Association, the National Cable & Telecommunications Association and the companies that make the equipment. This efficiency upgrade comes at a crucial time – not only are modems and routers essential for internet access, they will only become more important as smart technology advances and more of your household systems are hooked up to the internet.

“This agreement will begin saving consumers energy and money – and do so long before any mandatory regulatory standards could take effect – while protecting innovation and competition,” Gary Shapiro, president and CEO of the Consumer Electronics Association, said in a press release. “By setting requirements for energy-efficient broadband equipment now, the agreement will lock-in efficiencies at the dawn of the Internet of Things, which depends on strong broadband networking.”

Following the Cable Box Lead

This agreement is similar to a voluntary deal worked out by manufacturers of cable set-top boxes, in which the companies worked with the U.S. government to set an attainable benchmark. The deals are voluntary out of practicality, because federal regulations can take years to take effect and can be quickly rendered obsolete by ever-advancing technology.

“Our industry has proven that voluntary, energy-conservation agreements are the best means of effectively improving energy efficiency, while recognizing the lightning-fast pace of tech innovation,” Shapiro said.

Similar to the set-top boxes, modems and internet equipment are nearly ubiquitous in U.S. households, and they draw power nearly all the time unless the family pulls the plug at night. That means there's a lot of room for cutting back on their electricity usage. If you aren't sure whether the energy savings are worth upgrading your modem or router, ask an electrician to help calculate your consumption and offer strategies on how to get the best return on your conservation investment.

You should never “lend” your contractors license to anyone, for any reason, ever. There are many good reasons for a contractor to have this “never lend” policy.

However, sometimes it can be advantageous for a contractor to pull a permit for someone else’s work. Like a homeowner installed his own main electrical panel and then he finds out that his city does not allow homeowners to obtain a “Homeowner’s Permit” for that job.

Without going into a lot of explanation, here is a form I made up a few years ago that has minimized my risk and maximized my profit in these situations. WARNING! Is this legal in your state? I’m not the guy who knows or is going to find out; that’s up to you. But, anyway, here’s the form:

I _____________________ am requesting that The Electric Connection

Print Name

obtain an electrical permit for electrical work located at

__________________________________________________________

Address City State Zip

I am aware that The Electric Connection did not perform this electrical work and is not responsible for any corrections or repairs required as a result of either the electrical work or the inspection of this work.

I am aware and agree that The Electric Connection is obtaining a permit for work that was done by others and that The Electric Connection is not responsible for the quality and/or safety of this work now or at any future time, and that The Electric Connection is not responsible for any present or future liabilities arising out any of the work covered under this permit.

For the sum of __________ plus the exact cost of the electrical permit, The Electric Connection will obtain an electrical permit for this electrical work. If the electrical work does not pass inspection, I may or may not choose to hire The Electric Connection to make any corrections necessary to bring the electrical work up to city/national electrical code standards as required by the electrical inspector.

If I choose to hire The Electric Connection to do this electrical work, I am aware that there will an additional charge for this work, and that this additional cost will be mutually agreed by myself and The Electric Connection before any work is started.

________________             ___________________ Signature                                    Date

———————————————————————————————-

Visit our company profile.