Surge protection is part and parcel of every electrical system and many devices such as HDTV’s and computers are plugged into surge protection devices. However, it’s not necessary to have individual devices to protect the different appliances or equipment in your home. It’s possible to get a centralised surge system installed into your property’s main electrical panel; this turns your home into a single large surge protector.

This kind of a system offers a significant amount of convenience. Most homes nowadays have a large number of appliances and equipment ranging from washing machines, dishwashers, electric stoves, ovens, refrigerators, HVAC systems, home PCs, printers, scanners, pool equipment, hot water systems, outdoor lighting, irrigation system, home entertainment and music system and more.

Based on the number of equipment and appliances you want to protect, a centralised surge protector can be much more affordable than just getting individual surge protectors installed. This also extends protection to all the other larger appliances in your home, that don’t already have any surge protection adapters. The different types of surges that can occur are:

The long and short of it is that surges can occur at any point of time and this is what makes it important to have a centralised system that will provide protection to all the equipment and appliances in your home.

If you notice the lights in your home flickering, that is generally caused by an electrical surge. Typically, these types of surges won’t burn out your appliances and devices, but they do have a negative impact on the longevity of this equipment. When it comes to getting surge protectors installed, the high-cost of the damage caused by electrical surges to our electronic equipment and appliances should be the topmost priority.

Current day home appliances such as ovens, dishwashers, refrigerators etc. are becoming increasingly sophisticated and operate on smart technology. They have a large number of closely intertwined, sensitive components; an imbalance or impact to one of them has the potential to impact the rest of the components too. This holds true for larger systems such as the hot water and HVAC systems too.

Even when these systems aren’t being used, major electrical surges can cause heavy damage to them and will shave years off of their operational lives. Without you realising it, this can result in thousands of dollars of losses in the duration you live in that home. In some cases, a massive power surge can cause irreversible damage to your HVAC or hot water system, and replacement becomes the only option you are left with.

Keeping all these aspects in view, it becomes extremely important to ensure that you have a high-grade, reliable surge protection system installed in your home. We at Allround Electrical can provide excellent electrical upgrade maintenance solutions to commercial and residential customers.

We will survey the space, make note of all the equipment and appliances on your property and will provide solutions that are best-suited to your needs. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

LED Lighting Kit. This complete LED strip lighting kit is designed to permanently install on canopy tents, sun shelters, instant canopies, pop-up shelters, or E-Z UP Instant Shelters. A variety of colors are available—including “Bugs-Away” yellow—and the strip lights provide up to 360 lumens of illumination.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.