Nothing is more important than your family's safety. That's why you need to make every effort to identify and eliminate fire risks in and around your home, particularly in your electrical work. Faulty wiring, delayed maintenance or carelessness can lead to a disaster that can cost you your home and endanger your life. Read on to learn more about the most common causes of electrical fires and how you can prevent them.

Power in Percentages

Electrical failures contributed to about 47,700 home structural fires in 2011, according to a report by the National Fire Protection Association (NFPA). Those fires resulted in 418 deaths and $1.4 billion in damage. Clearly, the stakes are high in making sure that the electrical work is safely installed in your home.

According to the NFPA's report, 48 percent of home fires caused by electrical failure were started by the electrical distribution and/or lighting systems. Of that 48 percent, 63 percent were started by wiring, 20 percent by lighting, 11 percent by cords and plugs, and 6 percent by transformers and power supplies.

Fans caused an additional 6 percent of electrical fires, washers and dryers another 6 percent, space heaters 4 percent, air conditioning 4 percent, water heaters 3 percent and stovetop ranges 3 percent.

Don't Become a Statistic

The good news is that electrical fires have declined steadily since the 1980s. Modern technologies and building techniques have lowered the risk of fire and kept everyone safer. However, there's no reason to be complacent when it comes to safety. To decrease your risk of falling victim to a fire caused by your electrical system, follow these tips:

Keeping Your Family Secure

Stay vigilant about maintaining your electrical equipment and follow all safety recommendations to reduce your risk to a minimum. If you are concerned that your home is at risk of fire, have a qualified electrician inspect your electrical work and point out any danger areas without delay.

Any business knows that productivity is key to growth, let alone staying afloat. Whether you are talking about a production line, a traveling salesperson, and yes even your office space; productivity is going to be the main driving factor which will allow your business to not only stay in business, but also experience growth year over year, month over month.

Here we are going to describe 23 ways to improve office productivity which will in turn allow you to realize higher profits, more output, and less money being wasted to lost productivity.

First on the list? Improving office productivity through computer applications:

Science proves that taking more breaks allows us to be more productive.

How does that work if we technically will have less “work time” by taking all these breaks?

It gives us time to collect our thoughts, time to let our mind roam, and even some time to talk and bounce ideas off of others.

So, instead of making employees hate working because you limit them to one break a day; let them take a short one every hour or two and watch the ideas and productivity outputs increase!

Not only should you be organizing your desk, but also the entire office.

A cleared out area allows for a clear mind to work at much higher levels of clarity. Whether you have a cubical office design or a more open concept; requiring all areas of the office to be clear on either a weekly or daily basis should be a must.

Sure, not everyone likes to clear. But, if you give employees 10-15 minutes to clean their area at the end of every day I’m sure most people will be happy to do so (especially if you explain it is part of your initiative to improve productivity in the office)!

Some people have a habit of checking their email every 10 minutes while they are waiting for someone important to get back to them.

In reality, the likelihood of them replying back right away even if you get back to them quick is slim. On top of that, it seems down right desperate.

By implementing 2-3 time periods (again, depending on the department) that people should check their email; you will end the constant refreshing of email pages by a lot of your work force. This allows people to get back to work and pay much more attention to their work at hand.

There can be multiple things wrong with your lighting system that might be throwing off people in the office.

First of all, if you have fluorescent lights then you might just have a few (or a lot) of lights in your office that flicker or even worse, buzz. This can cause eye stress, annoyance, and a general distraction.

On top of that, you may have either an under-lit or over-lit office. Both are bad, and it’s up to you to find the optimal light output for your office. This can be done by surveying employees on your lighting system and going from there.

Lastly, low quality light can be an issue. An easy way to not only improve the quality of light but also get rid of flickering and buzzing light issues is by upgrading your reduce your energy usage by up to 30% or so. Sounds like a win-win situation here!

Not only will they help with productivity, but they will also clean the air of toxins which will keep the air fresh and not-so-stuffy.

Stop making it so difficult to get around. Make it easy to get to the bathroom, to the trash, or even to an outlet.

Time is money, and if people are having to spend time just to get to the most basic things you aren’t setting up your office for success (literally).

Using office design to increase productivity can be difficult, sure. But it doesn’t have to be all that complex. You could even get some people together to brainstorm what could be done to best optimize the space you have to best serve efficiency in the office. So while there will never be the “best office design for productivity” hack or tip (due to all offices being different), you can always use some general guidelines and common sense to help you out.

Wherever the noise may be coming from, while it may not effect everyone it may be effecting some people.

Now, this can be an easy fix if the noise is coming from within the office. To solve this issue, all you need to do is address the area of concern and fix it. But, what if the noise is coming externally on a frequent basis?

Well, you can do either of two things. Firstly, you can try to address or confront the external noise producer and see if there is anyway for it to stop at least during your time of work. If that doesn’t work, then you might need to install sound proofing technology into your walls. This can get pricey sure, but you’ve got to weight the benefits of having less noise in the office versus the cost it is going to be to make the upgrade.

Although you might think that you won’t be able to get everything in if you shorten meetings, you would be mistaken!

In fact, having shorter meetings make them much more focused and thus; more productive. Even if you have two meetings over one a week because they are shorter, it is much better to have two 10 minute meetings over one 30 minute one that lacks purpose.

On top of that, do you really need to have a meeting? Or, are you just holding meetings to “have a meeting?” If it is the latter, try scheduling meetings only when they are needed, rather just out of habit.

Looking for ways to motivate the office into getting stuff done? 43Folders.com and it’s a simple concept: work for ten minutes, break for 2, then repeat this 5 times (or an hour).

You might say, “are you mad?! No way I’ll let my employees take a break every 10 minutes.” But here it out…

Maybe you shouldn’t implement this tactic specifically, but make a variation that works for your needs but still allows for productivity to be most optimal. And yes, there will be times when extreme concentration is required for more than 10-20 minutes, and obviously this doesn’t have to be a “set in stone” type deal. Instead, make it a generally accepted practice to partake in such method of break and work balancing.

(We already talked about more breaks in #3, but we thought this hack was worthy of its own).

Have you ever listed a job listing opportunity with one of the qualifications as “multitasking?” If so, you’ve got it all wrong. In fact, you should be listing a qualifications as “the ability to be laser focused on one thing at a time.”

Multitasking Parkinson’s law” in short says that we will fill whatever time is allotted to complete a given task.

Why do you think people with a 3 month deadline to get a presentation done still find themselves struggling to get it ready to go last minute? Because they will fill the entire time they are given to finish it. This goes with any task, and if you shorten the time allotted to finish tasks you will see more getting done because people will work to fill the allotted time given.

This of course can be used too far and not given enough time to get things done with all the proper due diligence required. Finding a good balance of long enough but not TOO long will be difficult, but start looking into deadlines and what exactly defines how far out they get set and start thinking about setting shorter (yet still doable) deadlines.

Studies show that standing will not only improve health, but it will also improve productivity. Focus goes up and thus more work can get done.

call center workers showed that pollution in the office reduced productivity levels. As you can imagine, pollution is a major issue in a lot of places, especially in bigger cities.

Your home is supposed to be your safe place, your sanctuary, but if you have an older home, it can quickly become a nightmare. Old home wiring, especially if the wiring is 50 years or older , can put your home and everyone it it at risk for an electrical fire. While wiring doesn’t quickly age, it does age, it does break down, and it does carry risks. Keeping an eye on your home’s wiring and the way that it behaves is one of the best ways to avoid an electrical fire and protect your home. Your home is trying to tell you exactly what it needs more often than not, so keep an eye out for some of the following signs that your home’s wiring is too old and needs to be replaced by a professional electrician.

While there could be a variety of reasons you might have dimming or flickering lights in your house, if it becomes a regular occurrence, it’s time to get an electrician out to your house. These kinds of symptoms are your house telling you that there is something going on in your electrical system. Whether it’s that there is too much power being drawn at one time or that the wiring is failing, a licensed electrician can help to diagnose and fix the issue.

If you’ve had a rodent problem in your home at any time, it’s exceptionally important to have your electrical system evaluated. While rodents would prefer to munch on the cereal in your cabinet, there is something about home wiring that is exceptionally appealing to them. While they’re burrowing around in your walls, there is a high chance that they either chomp through wiring or knick it enough to expose the wiring to the insulation in your walls. Both scenarios can put your home at risk for an electrical fire at any time.

If you’ve never had a circuit breaker trip on a regular basis, then you probably don’t know how absolutely frustrating it can be, especially when the problem is probably hidden somewhere behind the walls. A circuit breaker that continues to trip is a big indication that something is wrong with your wiring. Instead of trying to force it on, make sure to call your electrician to help root out the cause of the problem in order to fix it.

If you’ve ever gone to plug in an appliance and been shocked, that’s probably not a good sign. However, if this happens regularly where you get shocked or your switches and outlets start to look discolored from burns, you have a big problem on your hands. These signs are indicative of a wiring problem and wiring shorting from the energy heavy appliances that are more common today. Don’t just hide the problem with a new outlet cover, have the problem checked out and repaired.

Lastly, don’t dismiss random burning smells or the sharp smell of burning ozone. Both could be indicators that something is going on behind your home’s walls that you can’t see. When you flip a light switch, this connects a live electrical wire and allows power to continue into a light fixture or appliance. If there is burning when the switch is flipped on, the odds are the problem is in the wiring that connects the switch and the light fixture. However, a licensed electrician can determine the extent of the damage and what the problem is.

High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.