We have 168 hours in the week, and most of us spend 40 of those hours at our office. If we are spending this much time in one place, we want to make it a comfortable atmosphere for ourselves and others who are visiting. The appearance of your business can be influenced heavily by its lighting. Here are some business lighting solutions to keep in mind to help yourself and your business.

The last thing you want is to be sitting in a dark space day after day. Getting the proper lighting in your office will help lift your energy and make your space more enjoyable. When you look at your office space, can you identify dark spaces or dimly lit areas? If so, you are most likely in need of a lighting redesign. Using pot lights and spot lights can help to brighten up even the darkest corners without adding large fixtures to your space and reducing the height of the room. In rooms where you have no natural light at all, it is especially important that you have substantial lighting. Having only light from your monitor can create stress on your eyes.  Let an expert review your space and get your ceiling connected correctly with the right lighting.

For those businesses that are looking for foot traffic even at the late hours of the day or night, this is a big one to consider. The outside of your building should be well lit for potential customers to see. Not only does it make your business more appealing, but it also adds safety for both your customers and employees. Adding outdoor spot lights and overhead lighting can make all routes to your business visible and safer for everyone.

At this point most of us are tethered to our computers. Without them, little work can be done. So, if a power outage occurs, you could be looking at hours of downtime. Installing a backup generator can help to protect you from the unproductive hours. If a power outage occurs, the backup generator will engage to keep your electronics up and running. Computers, printers, registers, and tills can be continually used. An investment like this can pay for itself over the years.

Making your work a more enjoyable place can start with simple steps, like upgrading your lighting. Have one of our expert electricians visit your business and we can help you not only make it enjoyable for you and your customers, but more productive and safe.

Even though the summer brings high temperatures, don’t let it bring high electric bills with it as well. Did you know that you could find huge savings on your electric bill in your attic? With functioning attic ventilators, savings can be yours. Let the experts at Mr. Electric® help you understand what method will be of greatest benefit to you.

Brad Richards with Mr. Electric of Tucson offers his expert opinion on attic ventilators and will explain how to save money on your electric bill in the summertime.

Mr. Electric: What exactly does an attic ventilator do?

Brad Richards: An attic ventilator fan is essential in the summer because it evacuates the hot air that accumulates during the day from the attic and draws air in from the outside. Think of it as a means of cycling the trapped air out with fresh air from the outside. It ensures that the temperature of the air in the attic is closer to the air temperature outside. With stagnant air, the sunlight on the roof heats the air inside the attic greatly. It is best to evacuate that hot air in the summertime so that you can save money on your cooling. If you’re air conditioning unit (A/C) is running and you don’t have a functioning attic ventilator, your attic is acting like a radiant heater while you’re A/C is trying to cool the room at the same time. Essentially, they are working against each other and costing you more money.

Mr. Electric: What are the different types of attic ventilators?

Brad Richards: There are two types. One of them is a roof-top unit that draws air directly out through the roof and pushes outside air into the attic to regulate the temperature. The other type is a 120-watt gable fan system. This system consists of one fan that blows air into the attic and another fan that blows air outside, creating airflow that is constant to reduce the temperature in the attic. The gables are triangular in shape and are located on opposite ends from each other on the sides of the attic.

With both types of ventilation systems, there is a solar option. The system that we recommend most often is the roof-top solar fan. Hot air rises and the fan tends to pull the air up and out of the attic, while both gable openings are open for the fresh air to come in. This is the most efficient and best money saver because when the sun comes up, the solar cells power the fan and the fan speeds up the more the sun becomes more direct. Then, when the sun goes down, it naturally turns itself off because there’s no more direct sunlight on the attic.

Mr. Electric: What are the benefits of a homeowner installing an attic ventilator?

Brad Richards: The number-one benefit of having an attic ventilator in the summer is you are able to keep your home cooler for less money. Solar-powered fans offer an even higher return on investment because you aren’t paying for electricity to run the fan. Using natural sunlight to cool your attic is a great way for homeowners to save money in the process.

Mr. Electric: Do you have any additional tips or recommendations?

Brad Richards: Regardless of whether you choose roof-top vents, gable fans, or solar powered fans, any home in the summer would benefit from attic ventilation. In other words, if you have an attic, there is a benefit to having ventilation.

For more information about attic ventilators and how they can benefit you, your home and your wallet, check out this article from the experts at Mr. Electric. 

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Spring has sprung. The weather is getting nicer. Time for a new pair of sunglasses?  It was time for me. Even though sunglasses are not a regular topic of our lighting blog, I felt that my recent experience picking out new sunglasses warranted this post. I was disappointed at the number of myths about sunglasses that were told to me by multiple, yes, multiple, supposedly knowledgeable sales people. So, I figured that it might prove useful to others if I shared my experience and busted these myths with this sunglasses buying guide. 

Myth #1: UV Protection In Sunglasses Not Important

Fact: The sun’s ultraviolet (UV) rays can do several very bad things to your eyes and the area around your eyes: harm the lens, retina, and whites of your eyes, cause corneal sunburn and blisters, increase your chances of getting cataracts, have been linked to macular degeneration (vision loss due to damage due to a small spot near the center of the retina called the macula), cause skin cancer around your eyes including your eyelids, and help cause unwanted wrinkles and skin thickening around your eyes. WOW!  There’s a lot more but it would take more than this short response to get even more technical.

Myth #2: Sunglasses With Glass Lenses Remove All UV Radiation

I visited a small boutique optometry store and spoke to someone with 40 years of experience. He told me that if a pair of sunglasses has glass lenses, then they remove all UV radiation. Not true.

Fact: Glass of almost any kind (building windows, car windows, a pair of clear glasses) can remove some but not all of the UV radiation that reaches your eye. Ultraviolet (UV) radiation is made up of three segments: UVA, UVB, and UVC. Fortunately for all of us UVC radiation is blocked by the earth’s atmosphere, ordinary glass blocks out UVB radiation (the main sunburn ray that causes skin cancer and sun damage) but allows UVA to pass right through (UVA rays penetrate the skin more deeply and can also cause skin cancer, wrinkles, and premature skin aging). However, it is possible to add a special UV-blocking film to ordinary glass or use specially formulated glass (or plastic) to block out 99.9% of UVB and UVA radiation.

Myth #3: Polarized Lenses Also Mean UV Protection

Two representatives in the optical department of a national chain of retail stores told me that if a pair of sunglasses has polarized lenses, then they also provide UV protection. Not true.

Fact: These two features of sunglasses are entirely different from one another; one feature does not imply the presence of the other feature. Polarized lenses minimize direct and indirect glare from the sun; they allow you to see more clearly when the sun’s rays are reflected off flat, smooth surfaces like water, road pavement, and car hoods. Polarized lenses are not designed to reduce the ultraviolet radiation that reaches your eye.

Myth #4: More Expensive Sunglasses Have The Best UV protection

Fact: This is not always true. Relatively inexpensive sunglasses can sometimes block 99%-100% of UV radiation but they are not easy to find. However, you should be careful about still another problem – inexpensive sunglasses sometimes are non-uniform in thickness and have poor optical quality. This can mean that they sometimes distort the shape or clarity of an object, depending on what portion of the lenses that you look through.

Myth #5: Sunglass Tint Is Not Important

Many people think that the tint of the sunglass lenses is not that important. That it is purely an aesthetic decision based on your personal preferences and the “cool factor” you’re looking for.

Fact: The tint or hue of the sunglass lenses plays an important role in the perception of colors. Yellow or rose tinted lenses generally can make it difficult to distinguish different colored traffic lights. Gray, green, and brown lenses, however, minimize color distortion and are a better choice when you’re driving a vehicle. Some specialized sunglasses can have a special tint that are designed to enhance your performance of a specific task or sport; e.g., at least one sunglasses manufacturer has created a whole array of lens hues, one of which can possibly improve your tennis game by enhancing the color of the tennis ball.

Myth #6: Size Of Sunglasses Not Important

Most people choose the size of their sunglasses on whether or not they think they look “cool.” Thus, they think that size is not important.

Fact: Size, at least when it comes to sunglasses, does matter. It’s this simple: The larger the sunglasses, the broader the protection of your eyes, eyelids, and the skin around your eyes against UV damage. However, you can have all of that and still look “cool.”

Enjoy your spring and summer and enjoy your new sunglasses.