Appliances can make for exciting and valuable additions to your home; however, they use a lot of electricity and can ultimately take a toll on your electrical system. As a Plano TX electrician is called to help install the appliance, the importance of appliance installation safety is ignored and the awareness of potential dangers and mistakes in installation is minimized. As a result, things that at the time of installation seemed trivial in the long run can cause significant problems.

Ideally, with the help of a www.electricmaninc.com. Also, feel free to ask your questions in the comments section of our blog and we will get back to you soon.

When facility managers or building owners first start the search for new replacement lighting fixtures in their facility, it can seem like a long road ahead.

From all of the read this post where we talk all about what it is. From there, you can come back to this post and continue, it will really help you keep up! Now, let’s get into when high bay lighting is practical in both broad terms and specific applications it is best used in.

In broader terms, the most appropriate time to use a high bay lighting fixture is for ceiling heights that are between 20 to 40 feet high. For heights between 15 to 20, you typically are going to go with a low bay fixture, but that’s for an entirely different post. For anything lower, you will typically be dealing with tubes and panels lights, most often found in offices, hallways, and other similar type environments.

So for commercial and industrial type environments in which the ceiling height is 20 to 40 feet tall, a high bay lighting fixture is commonly the most chosen lighting fixture to install. That is the broad definition of when high bay fixtures are going to be used at the most optimal rates.

So, what types of high bays are often used and fit the purpose perfectly. Although these applications are highly relevant, there are some we have not listed and may have missed, but these are just a few of many very practical applications that high bays work perfectly in:

Gymnasiums

Think about your school gym, or even your warehouses often have tall ceilings due to storage space requirements, this need for space vertically makes their ceilings the perfect height for high bay fixtures.

Factories

Similarly to a warehouse, factories and production facilities need proper lighting to keep things safe and consistent. With proper lighting through installation of high quality high bays (such as with LED technology), you opt-in for better safety standards and higher consistency in your production efforts.

Airplane Hangars

Large airplanes call for large ceilings in the hangars and a proper lighting system is a must for this environment. When maintenance is required, you need clear and proper light to contact one of our professionals.

It’s football season, which means every Saturday and Sunday, your home’s TV becomes an essential gathering point in your home. Sadly, in the Washington, DC, Maryland, and Northern Virginia area, autumn is also thunderstorm season. So how can you protect your expensive TV from electrical surges and storms? The electrical experts at Kolb Electric have the answer.

Electrical surges—whether from lightning strikes or otherwise—are easy to prepare for with proper equipment. And if you’ve spent four figures on a television, it might just be worth the investment! You can protect your TV from a power surge in two ways: by installing a dedicated circuit and/or installing a whole-home surge protector.

Your dedicated circuit for your TV will make sure that your TV isn’t having its power leached from other electronics in your home, making its sound and picture clearer, while the whole-home surge protector will protect your TV from lightning strikes and power surges.

Effectively defending your home from power surges requires a two-step approach: first, outfitting it with a whole-home surge protector, then using surge-protected outlets and power strips indoors. Both types of surge protectors act essentially like pressure relief valves, diverting excess energy away and restoring normal operation once levels regulate.

Whole-home surge protectors are usually wired to a service panel and are designed to stop surges of at least 40,000 amps, though larger ones can be installed. Pairing them with individual plug-in surge protectors should do a good job of catching any potentially damaging energy that may get into your home.

Like many safety-related things, whole-home surge protectors are appliances you buy and hope to never actually use. But all it takes is a single downed line or big lightning strike to cause thousands of dollars’ worth of damage to your home—not worth the risk!

As much as some good task lighting and a ceiling full of recessed cans will make a room come alive, there’s nothing like airy, natural light. You can change your home’s color, its style, and even its structure, but when it comes to the amount of sun you get, you can rarely change much. How much natural light you home receives depends on so many different factors both in and outside of your house – the direction your home faces, the topography and structures around, the number of windows you have – these can be costly or just impossible to fix.

So, when you’re on the market for a new house, be sure to consider the lighting potential of any dwelling – lest you end up with a dungeon, or an oven.

Here are some questions to keep in mind when scoping out a new property:

Normally, south-facing homes get sun at the front of the house, and for most of the day. They tend to be brighter and warmer. A house that faces north gets light at the back and is cooler and darker. This may be especially important to note depending on your climate. When it’s cool most of the year, you may want a house that’s naturally a little warmer, if it’s warm for most of the year, you may prefer a house that doesn’t make you cook.

Also be sure to take a look around your property and note what could potentially affect your light. Does your house face an open field, or another row of houses? Are you at the base of a hill that will cast a shadow for most of the day, or at the top, almost always exposed to sunlight? These factors will influence the brightness in your home, and also the temperature.

Once your house is built, it can be costly and time-consuming to add or remove windows. So, before taking the plunge and becoming a home owner, make sure to consider the size, shape, and placement of your windows, and what that means for the home’s natural light levels.

Are there large trees close to the house blocking out the light? Will a close-by lake reflect directly into your windows? Are the windows crazy tiny or just too big? Be sure to consider modifications – window coverings you’ll have to buy, foliage you’ll have to trim – and whether or not they would make a difference.

You already have a smart phone – maybe even a smart thermostat. What's next? Believe it or not, refrigerators are next in the line of devices with advanced features and technology to improve our domestic lives. A new smart fridge, manufactured by GE, is scheduled to come on the market this spring.

Welcome to the Future

For the average household, the refrigerator is the third-largest energy drain after the HVAC system and the hot water heater. That means there's a lot of room to improve on efficiency.

Your garden-variety refrigerator really only has one setting to manipulate: the temperature. And the EPA recommends setting it between 35 and 38 degrees, so there's not a lot of leeway in that regard before you risk spoiling your food. The real value in a smart fridge  is in its communication with you, reminding you to adjust your behavior and not waste any unnecessary energy.

For example, if you leave the door open, a smart fridge can alert you to close it rather than wasting all that cold air. If it's time to clean the coils, it gives you a heads up, so it can continue to operate at peak efficiency. If the power usage suddenly spikes for no apparent reason, the fridge lets you know so you can have it serviced to correct the problem.

The EPA is encouraging manufacturers to include such smart features in their products. “These features would offer consumers more ways to reduce the energy consumption of their refrigerators and freezers, help lower their utility bills, and better protect the environment and the climate,” the agency says. “Refrigerators and freezers with connected functionality will also be “smart grid”-ready, meaning that with consumer permission, they will be able to respond to utility signals, including curtailing operations during more expensive peak demand times.”

Savings Beyond Belief

If your refrigerator is more than a decade old, it's costing you more money than it should in electricity usage. If it's more than two decades old, it's really draining your finances. That good news is that the new models are so efficient they could pay for themselves in utility savings within a few years. New federal standards kicked in for refrigerators last fall, which means that the latest models are performing at an all-time peak.

When you go fridge shopping, make sure you purchase a model that bears the Energy Star logo, which means it performs at least 10 percent above and beyond the minimum federal efficiency requirements. “We can all do our part in meeting the challenge of climate change,” said Janet McCabe, Principal Deputy Assistant Administrator for EPA's Office of Air and Radiation, in a press release. “By choosing Energy Star appliances, families can save energy, save money, and reduce carbon pollution.”

If every fridge and freezer in the country were updated to meet just the minimum requirements, homeowners would save a cumulative $890 million annually on their energy bills. Even if your share is just a small fraction of that, every bit counts.