If you are like most families, you probably have an extension cord – if not multiples – around your house. But did you know that these are among the most dangerous electrical appliances in your home? If not used properly or cared for appropriately, an extension cord could be the cause of fatal injuries, electrocutions, or even a house fire.

Not all extension cords are the same and it is important to select the appropriate extension cord for your needs. The next time you go to grab the same old extension cord, ask yourself these three questions that will help you determine whether it is appropriate for the task at hand.

If you are looking to use an extension cord outside, you must check to make sure that it is equipped for such. An outdoor extension cord has tougher insulation/jacket allowing it to withstand moisture, temperature change, UV rays, etc. An extension cord that is safe for outside use will say so clearly on its packaging. If you are not sure, contact the manufacturer.

The length and gage of your extension cord will determine the wattage rating of the cord. Ensure your device(s) wattage doesn’t exceed the cords wattage, this could cause overheating and/or a fire. The wattage of a device is generally found on a tag attached to the cord. Again, if you are not sure, contact the manufacturer to clarify. Better safe than sorry!

Another important consideration is the length of time that you are using the extension cord. An extension cord is only intended for temporary use. Leaving an extension cord plugged in will cause electricity to continue to circulate through the device and could potentially cause overheating, a fire or defects to the device. If you are looking for a permanent fix, look into installing more electrical outlets around your home and plug your device directly into the outlet.

For more information on how to ensure the safety of your home and devices, contact Expert Electric at 604-681-8338.

Fixing the wiring in your home is not something that you want to trust to just anyone. The possibility of shocks and electrocution as well as the danger of electrical fire presented by a poor wiring job are too serious to risk doing your own electrical work, and an inexperienced electrician can provide shoddy work that impacts your safety and your wallet.

For all things electrical, from installing a new outlet to rewiring a new addition, you need the skills, training, and experience of a licensed electrician. There are many good reasons for narrowing your search to only include local electricians.

An electrician who works and lives in the area is most familiar with local building codes, material vendors, and the procedures necessary to get the required licenses. What’s more, electricians are licensed by individual states (and the District of Columbia) and are only permitted to work in those state(s) where they have passed the licensing exam and where they meet the continuing education requirements.

Another good reason for working with a local electrical contractor is that when you work with a local small business, the dollars you spend stay in the community rather than going to the corporate offices of a large company or big box retailer. Local electricians are your neighbors and will spend the dollars you give them at local restaurants, retailers, and community service programs.

Lastly, though possibly most importantly, local electricians rely on their reputation for their livelihood. They’d be out of business quickly if satisfied customers didn’t recommend them to their neighbors, co-workers, church members, and friends. For that reason, a local electrician has an extra incentive to do quality work on your project.

At Kolb Electric, we’ve been helping Maryland, Northern Virginia, and Washington, DC homeowners with their electrical needs for more than 90 years. We live right here in the communities near you, shop in the same stores, and support the same businesses. We’re familiar with the houses in this area as well as the local building codes and licensing requirements. We also know where to get the best prices for you on quality electrical supplies.

To learn more about how Kolb Electric can help you with your next electrical project, large or small, call us at 877 287-1179 or contact us online today.

Restriction of Hazardous Substances (RoHS): RoHS Compliant

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Warranties

Super Bright LEDs, Inc. offers a minimum 2-year warranty to protect against manufacturer defects and malfunctions. Longer warranties are available depending on the product. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair, or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

Read more

Lifetime Warranty

Super Bright LEDs, Inc. offers a Lifetime Warranty on a variety of products to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.

Read more

CE: Meets European health, safety, and environmental standards

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

UL Recognized: Product component safety and environmental certification from Underwriters Laboratories (UL) LLC

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

DLC: Listed as a quality, energy-efficient product by the DesignLights® Consortium (DLC®)

The DesignLights Consortium® (DLC®) partners with energy-efficiency groups and utility companies to establish a set of standards for commercial LED light fixtures. The product is tested and must meet quality, energy-efficiency, and performance requirements to be added to the DLC’s Qualified Products List. For more information, click

DOT Approved: Approved by the Department of Transportation (DOT)

The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures, such as headlights and tail lights, that have a DOT mark are legal, safe, and considered to provide suitable illumination for street use.

SAE International Class 1: Classified for use as emergency vehicle lighting by the Society of Automotive Engineers (SAE)

Vehicle warning lights are ranked by the Society of Automotive Engineers (SAE) according to class. A Class 1 LED light delivers the most amount of light (in comparison to class 2 and class 3 lights) and is ideal for emergency lighting on ambulances and fire trucks as well as police and rescue vehicles.

ETL Listed: An ETL-Listed product meets national safety standards

A product that bears an ETL-Listed label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

FCC: Complies with Federal Communications Commission (FCC) rules. Won’t cause harmful interference.

Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won’t cause interference with other electronic devices. According to FCC’s website, “The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories.” Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC’s guidelines and limits and do not cause harmful interference.

SAA: Standards Australia (SA) compliance

Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.

IP65

The weatherproof product allows zero entry of dust. It is protected against jets of water and may allow limited liquid entry.

IP66

The weatherproof product allows zero entry of dust. It is protected against strong jets of water and may allow limited liquid entry.

IP67

The waterproof product allows zero entry of dust. It is protected against the effects of immersion between 15 centimeters and 1 meter.

IP68

The waterproof product allows zero entry of dust. It is protected against long periods of immersion under pressure.

IP69K

The waterproof product allows zero entry of dust. It is protected against high-temperature, high-pressure water and steam.

UL 844: Meets requirements from Underwriters Laboratories (UL) LLC for use in hazardous (classified) locations

UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:

These requirements cover luminaires for use only under the following atmospheric conditions:

Every home has a fire detection system. This vital safety feature should be well understood. Smoke detectors, carbon monoxide detectors and security systems give homeowners peace-of-mind. Furthermore, when combined with a security system, these devices work together to form a complete home protection plan.

The second type of detector is an ionization detector. It uses a small amount of radioactive material to ionize the air in an internal chamber. This in turn, generates a voltage that can be measured. By-products of combustion will change the voltage that is generated and trigger the alarm. This type of detector is better at identifying active combustion with little to no smoke.

While both types of smoke detectors will safely alert a homeowner to a fire, combination alarms exist that employ both methods. Consequently, the responsiveness of the whole system increases. Hard-wired detectors are also available which can be wired to trigger all the alarms in a home if anyone detects a problem.

In any appliance that uses combustion, such as a furnace or stove top, a potential exists for hazardous carbon monoxide buildup. This by-product is tasteless, odorless, colorless, and highly toxic in large concentrations. Therefore, a carbon monoxide detector is highly recommended. It will monitor the levels of CO in the air and alert inhabitants before they become dangerous. They are available as stand-alone units that can be plugged in to standard wall outlets or as combination roof-mounted CO and smoke detectors.

Home security systems have been around for decades and make use of a combination of sensors including door, window, glass-break, and motion sensors. Historically, these devices were hard-wired and fed back to a central control panel. Many modern systems make use of wireless sensors that allow for easy retrofitting of existing homes. Door and window sensors utilize a small magnet and magnetic strip held open when the door or window closes. If the magnet is moved away, the magnetic strip springs closed and triggers the alarm.

Glass-break sensors are placed near windows and use a microphone to listen for the distinctive frequencies associated with glass breaking. Motion detectors take advantage of a variety of technologies, such as passive infrared, microwave, or ultrasonic. This technology detects something moving within its range. These can be part of exterior security lights or interior motion sensors. Security cameras can also play a role in home security. Install them indoors or outdoors.

When installed and used properly, a home security system can easily increase home safety while reducing the chances of burglary or fire. Most insurance companies offer discounts for home security systems. Because of this, the entire cost of the system may be offset or eliminated altogether. Be sure to ask your insurance company about discounts to homeowner’s insurance for improving or installing a new security system.