Many people don’t even think twice about the fan in the bathroom. It seems like a standard fixture that should be a part of every home. When it isn’t, it is seen as more of an inconvenience than a necessity. The fan isn’t just for looks or an accessory. It is a vital piece of equipment that can keep your home safe from the damages of mold and mildew. If you don’t currently have a working fan in the bathroom, it is an easy fix with the help of an electrician. Burbank homeowners can call The Electric Connection to set up a bath fan installation.

Bath fans are not what they used to be. They are elaborate additions to a modern bathroom. Many include heat lamps that help replace the warm, moist air they are removing from the room. The fans are very quiet and are available in different speeds, depending on how big the room is. You can buy a fan at almost any home improvement store. An electrician in Burbank suggests you do some investigating to find the best fan for your bathroom. They are relatively inexpensive, which is pretty amazing considering how much money they can save you on repair costs from moisture damage.

A fan is a key component in your home. Each time you shower in the bathroom, you are putting a great deal of moisture in the air. This moisture clings to the ceiling, the floor and even the drywall. Your Burbank electrician explains that this repeated exposure to moisture can result in mildew and mold. Most people know mold is extremely dangerous and can end up costing thousands of dollars in remediation costs. Don’t let your home go another day without proper ventilation. Call The Electric Connection today and schedule your bath fan installation.

Most people have experienced a circuit breaker trip at some time or the other; and the first couple of times it happens, it can be quite alarming. However, this is a very important safety component in any electrical circuit. A circuit breaker is essentially an automatic device used to stop the flow of current within a circuit, as a safety measure. It is specifically designed to protect your property, equipment in your home/commercial space and you from overloading the electrical circuit.

The sole reason a circuit breaker trips is to prevent the overheating and overloading of an electrical circuit, beyond the capacity of that circuit. If there is no breaker in place, the electrical units in that circuit can get damaged and potentially lead to a fire.

In case a circuit breaker trips, the very first thing to do is to locate it in your panel box. The switch you are looking for is the one that isn’t completely in an On/Off position. Once you turn the switch into the ‘on’ position, the power will be restored. In case the power doesn’t come on, simply switch it off and then on again.

If the circuit breaker trips even after you have reset it, don’t just try resetting it again. It’s doing what it’s designed to do and telling you that there is something wrong that has to be investigated. There are three different things that can cause a circuit breaker to trip:

This is the commonest cause of a circuit breaker trip. It occurs when the electrical energy that’s flowing through the circuit is much more than what it can handle. The simplest way to solve this problem is to redistribute the power to some other circuits. Very simply put, in case too many heavy appliances are connected to a single circuit, move a couple of them to one that isn’t as loaded.

It’s important that you check whether the circuits aren’t loose. First, switch off the power and look for any loose wires; you can do this by closely inspecting the hot wires and outlets that lead from the service panel to the circuit breaker, and then tighten the connection that’s loose.

If after checking the circuit overload, you find there aren’t any issues in that areas, the problem could be a short circuit. This is caused when any live wire touches another neutral/live wire. At times a short circuit may be caused by a broken wire within the breaker. It’s far more difficult to identify this as it could be just about any part of the wiring system which is connected to that circuit. At times, the culprit could be an appliance that’s plugged into an outlet.

This issue is quite a dangerous and severe one and it’s important that it be diagnosed quickly. It can be quite tedious to look for a short circuit and the outlets, plugs and wiring that are connected to that circuit, but these checks are important. Look for cracks or signs of burning in the insulation and call an electrician without delay.

If it’s neither a short circuit nor a circuit overload that’s caused the circuit breaker to trip, it could be a ground fault issue. This happens when any hot wire touches the metal outlet box or the ground wire.

If a circuit breaker trips in your home or commercial property, keep in mind that it’s a very serious issue and not something that should be ignored. For the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or contact us through this online form.

Thanks for reading,1300 169 263

Landscape lighting can add beauty to your home as well as provide increased safety on your property.  Lighting design can be used to light pathways, highlight your homes architecture, and deter intruders.  When considering adding lighting to your landscaping, it is important to find the right balance of lighting.  Focus on adding lighting to main activity areas like driveways, entrances, pathways, dark areas around windows, and stairs and main focal points such as fountains, trees, or statues.  The following landscape lighting basics can help make the most of your lighting.

Up-lighting: Up-lighting is placing a light facing upward toward an object to illuminate it.  This works well for highlighting the focal points of your landscape or home.  Use it sparingly to highlight objects around your yard like statues, trees, flag poles, and fountains.

Down-lighting: Down-lighting is used to illuminate large areas.  It works well for illuminating entertainment areas such as a patio or a deck.  It also helps to deter intruders.

Accent Lighting: Accent lighting is an excellent choice for lighting paths and stairs by placing lights along both edges of a path or a staircase.  This looks beautiful and has the added safety feature of helping prevent people from tripping and falling.  Accent lighting can also add focus to low-lying flowers, shrubs, and ponds.

In any workplace, change is a common occurrence. Things like new equipment, movement of said equipment and any change in wiring is not visible to staff unless it’s properly documented. If it is properly labelled, a cable managing system can help in solving and detecting exactly where any problems occur.

Since practically every process in a company relies on electrical system, any disruptions can affect a wide range of processes, ranging from IT to basic infrastructure, leading to a possible halt in daily business activities and production.

Here are the main benefits of clearly labeling infrastructure components:

Without proper labels, a company can lose valuable time and assets trying to discover where and what the problem is, before they can work on fixing it, and without warranty protection and long-term maintenance of electrical, telecom, A/V and security networking systems, the loss can be immense.