Electrical engineers usually have a huge responsibility in implementing safe electrical conduits to ensure safety and efficiency in designs of power substations. Conduits are the means in which power cables run from the ground to the electrical equipment and appliances. In addition, conduits provide protection of medium-voltage circuits in the power substation. Examples of circuits that need this protection are collector circuits entering the substation and distribution circuits leaving the substation to feed residential and commercial power needs.

Cities like Colorado Springs, Denver, and Pueblo are constantly expanding and urbanizing—you can always spot a new neighborhood development on your commute to work. New homes are sprouting up all the time, and people are buying. However, sometimes new isn’t always better (or cheaper). There are a lot of great, older homes throughout Colorado cities, and are often a better choice when it comes to real-estate investments. If you currently own an older home, or you are considering purchasing an older home, you’re going to want to check for these common electrical problems that could cause issues in the future in terms of both safety and money.

Generally, homes that were built after 1940 are in the clear—they are usually safe and the electrical systems were installed up to code. Homes built prior to the 1940s should be evaluated, however, as many of the electrical wiring could have deteriorated or may not be able to power a home in this era of modern day technology and appliances. Regardless of when your home was built, it might be a good idea to have an electrician come out and evaluate the wiring systems in your home and ensure that your family will be safe. Here are some things that you can look for yourself when it comes to old wiring in old homes:

Old Cables

Metal cased, fabric covered, or frayed wires are signs that your wiring is outdated and unsafe. Many times during the early 1900s, electrical wiring was “protected” by metal jackets or canvas-like cloth, which can cause problems if the insulation in your walls has been damaged or aged, or even if the metal electrical cords were placed on inadequate grounding. If the wires get exposed, or start to fray in these two locations (next to insulation or on top of a poor electrical foundation) this could be a serious fire hazard waiting to happen. You know you need to call an electrician and get your wiring replaced when you can see any scorch marks on switches or outlets, when you see torn, damaged, or missing insulation, or when you see exposed wires that could potentially cause a fire.

ZINSCO and FPE Panels

Zinsco Panels

While popular around the 1970s, Zinsco panels are almost obsolete today. However, older homes can still have these panels as a part of their home’s electrical system. Not every Zinsco panel needs to get replaced, but it would still be a good idea to get it inspected, as these panels have circuit breakers that have been known to melt into the main bus bar and cause a fire.

FPE Panels

Federal Pacific Electric panels were distributed throughout thousands of homes in the 1950s to the 1980s, and have an unfortunate reputation of being extremely hazardous to the safety of you and your home. These panels have been known for their inability to trip the circuit breaker when the circuit is overloaded or short. When the breaker doesn’t trip, it instantly puts your home at a fire risk because the circuit is taking on much more than it can handle and has no way to shut itself off.

If you recognize either two of these logos on your electric panels in your home, call an electrician immediately to get them inspected.

Old Fuse Boxes—Below 100 Amps of Power

Houses built before the late 1940s and early 1950s were not expected to handle the amount of electricity that we use in modern time. That being said, the homes were installed with a circuit box that can only power 60 amp service (four fuses), or sometimes even 30 amp service (two fuses). This means that your older home may not be able to power all of the appliances and electronics that you have in your house. If your breaker is tripping constantly, or your electric bill is through the roof, this may be a sign that your older home needs an electrical inspection to update the amp-service. Older electrical panels are also at risk of starting a fire. If you are unsure whether or not your home is experiencing this, call an electrician to be safe, and they will be able to give their expert opinion on whether or not you need to upgrade your electrical panel in your older house.

These are just a few signals of outdated electrical work in an older home, but each one is a serious risk to the safety of you and your family. If you have an older house, be sure to get it checked out and evaluated for safety. The same goes for those who are looking to buy an older home in the Colorado area, as the electrical work could be outdated and dangerous.

One of the most devastating things that can happen to your business is an extended loss of power. Without power, you lose valuable business hours and revenue. Business interruptions of this nature are not necessary though, even if it’s the result of a strong snowstorm.

Being well-equipped with a quality commercial generator is essential to keeping your business running effectively and efficiently during a severe power outage. Understandably, you may have questions before purchasing such a system. We’ve tackled a couple of our most frequently asked below.

Every commercial property is different, and therefore your needs will be different as well. Your generator will be sized on the electrical load that it will be tasked with carrying. The actual square footage of your building does not play a factor in this, as it would for an HVAC system or commercial water heater.

Your new generator must meet your specific requirements so that it’s able to do its job without accumulating undue stress on the unit or damage to the devices connected to it. Accurate sizing involves a number of factors and considerations, which our service professionals are happy to assist you with.

If your commercial generator is well-maintained and used properly, then it will run as long as fuel is being supplied to it. How often it needs to be refueled will depend on what type of tank you have. Some commercial generators are supplied with a 24-hour fuel tank, although 48-72 hour fuel tanks are also available.

Additionally, unless your business or commercial space deals with food that could spoil, it’s recommended that you turn your generator off during non-business hours so that the engine can cool. This is particularly helpful during long power outages as it helps your system avoid unnecessary wear and tear.