So when customers ask us how many ‘Watts” do I need to replace an existing light source, we always convert them to lumens.

•  Pay special attention to the lumens per watt of a fixture. IT DOES MATTER. A LED product at 135 lumens/watt will consume far less energy than a LED product producing 97 lumens/watt. Not all LED solutions are the same. (remember, always buy on the lumens you need, never on the watts you think you need.).

•  To calculate lumens per watt, take the total number of lumens a product produces and divide it by the watts it consumes.

For indoor fixtures, figure on:

utility company. You can check if a product is DLC Qualified on the DesignLights Consortium website. DLC has rebates for Commercial LED Lighting and Industrial LED Lighting

•  Rebates with DLC Premium should be higher than rebates with DLC Standard. Your utility company is typically who provides the rebates and sets the rebate amounts.  Check their website.

•  All UL Listed or ETL Listed.

•  Replacing the light parts of an existing fixture with the a Retrofit unit will not void the UL/ETL Listing of the fixture. However, the exception to this rule are explosion proof rated fixtures (ie. Class I Div 2). Never retrofit a certified explosion proof fixture. UL1598C does not cover these types of retrofits.

•  ETL Listing is the same as UL Listing. They perform the same test, and the certification is the same. The only difference is that the company who performs the test.

Nineteen flash patterns greatly increase visibility. Patterns can be synchronized between light heads and easily controlled with one of Super Bright LEDs’

A weatherproof housing and sealed polycarbonate lens are built to withstand impact with road debris and exposure to wet conditions. Installation hardware is included along with foam anti-scratch pads for vehicle surface mounting. The durable LED lights operate within a wide 12-24V DC range for compatibility with any vehicle.

We know your family’s safety is important to you, but have you ensured their electrical safety? The amount of electricity running through your home has enough power to cause death if electrocuted.  Implementing a few simple tips regarding your cords and plugs, outlets, and circuit breakers could potentially prevent injuries or fires in your home.

Cords & Plugs

All your electrical appliances have cords, and being a daily item, many times we overlook any wear-and-tear that could potentially be a safety hazard to your family and home. Make it a habit to check each appliance’s cords and plugs before every use. Check your cords for any frays, cracks or kinks. If they are damaged, replace the power cord before use; such exposures could be a fire hazard.

Also, make sure to be using your cords appropriately. As much as you want to tuck away or hide your cords, never staple or nail cords in position! Try using tape or twist ties to secure your cords safely. Also, refrain from running your cords through doorways or under rugs, this could cause damage to the cord or cause overheating. Instead try using an extension cord to safely reach that desired location in your home. Although, extension cords are not intended for permanent use, this should only be a temporary solution. Consider rewiring if you are really tied to having your appliance in a specific out-of-reach position.

Outlets

Once you are confident that your cords are safe, now you need to ensure that your outlets are also safe. Every outlet should have its wires covered by a secure plate and if you have children, make sure your unused outlets are covered with a childproof cap. Avoid using multiple adaptors or power strips, which can overload your outlets and cause fire hazards. Instead, relocate your appliances to another outlet.

For outlets located near a water sources like your bathroom and kitchen, you should check to make sure that your home is equipped with a GFCI (ground-fault circuit interrupter) outlet. This is a fairly new technology of which is now mandatory in all new houses built. A GFCI will protect your family from electrical shock if it ever comes in contact with water.

Circuit Breaker

Your circuit breaker protects electrical wiring from overheating or catching fire. If too much electricity is passed through a certain fuse it will “blow;” breaking the flow of electricity. If this happens, the fuse needs to be replaced – make sure to find the right size fuse to allow the appropriate flow of electricity. Your circuit breaker should always be easily accessible and all members of your family should be aware of its location and how to use it when the time comes.

Your electrical appliances, outlets and circuit breakers are constantly changing over time so make sure to be checking them regularly. Make this a household habit for your whole family. If you notice any signs of electrical issues such as dimming or flickering lights, unusual sizzling or buzzing sounds, or if your circuit breaker is continuously tripping, call an electrician from Expert Electric at 604-681-8338. One of our experienced electricians will gladly examine your home for any electrical concerns.

Your family’s safety is our top priority!

It is difficult to obtain total peace of mind when you can’t really see what is going on behind the walls of your house. Because of this, you may want to look into having an electrical safety inspection completed by an electrician in Glendale. The electrician will go through and check some of the most common problems that lead to an electrical fire. The inspection will certainly make you feel better knowing your home is safe or identifying problems that could lead to a disaster if left unchecked. The Electric Connection has the staff available to complete one of these inspections in a professional and timely manner.

A quick inspection takes only a few minutes, but can quickly identify any potential problems. If you are not sure whether you need an inspection follow these guidelines.

*Lights that flicker, pop or don’t work at all could indicate a bigger problem.

*An outlet that doesn’t work or when it is in use, the breaker trips.

*You have exposed wiring anywhere in the house.

*A home that was built before 1950 and has had no electrical updates.

These are just some of the most common and obvious signs of trouble. If you have recently moved into a house, but are not sure about the condition of the Glendale electrical system, it is always a good idea to get a complete safety inspection. Older homes may have been constructed with aluminum or cloth insulated wiring. Today, we know this is not an ideal situation and should be upgraded. This isn’t something the average person would be able to see just by looking at it. This is why you need an experienced professional to take a look and determine just how safe your home’s electrical system is. Give The Electric Connection a call today and schedule your electrical safety inspection before it is too late.

You have probably turned on your furnace already this year or pulled out the space heaters to help warm up your room. It won’t be long before you start to see your electric bill rise with the cost of heating your home. There are some things you can do to help keep your electric bill down and more money in your pocket. Your neighborhood electrician has some best practices to help you reduce the amount of electricity you use on a daily basis. For more information, call The Electric Connection.

1-Turn the thermostat down a couple of degrees. You can wear a warm sweater or some thick socks while you are at home. At night, turn the thermostat down a couple more degrees since you will be sleeping with blankets.

2-Unplug your cell phone charger as well as tablet and laptop chargers when you are not using them. It may seem small, but every charger pulls a little electricity even when nothing is plugged in.

3-Switch out your old incandescent bulbs with CFL or LEDs. You may need to change out your light fixture, which your electrician can do for you. The investment in a new fixture will pay for itself when you save money on your monthly lighting bill.

4-Turn down the temperature on your water heater a few degrees. It is unlikely you would use water that is 125 to 140 degrees anyways. If you can’t use water that hot, it doesn’t make sense to waste the electricity heating it to that point.

5-Make it a rule you only wash full loads of dishes in the dishwasher and only full loads in the washer. Try washing clothes with cold water when possible.

6-Invest in heavy curtains to block the chilly air coming in through the glass in the winter and block the heat of the sun in the summer. This will keep your home more comfortable and save you money on your electric bill.

If you have any more questions for your electrician about energy savings, give The Electric Connection a call today to see what else you can do to save some cash.

— Electric Connection (@LAElectricianCA) December 15, 2015