Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

There are times when a circuit breaker will trip, which results in no power to an outlet or specific circuit. This can be caused by a number of different things. In most situations, the circuit breaker can be turned completely off and flipped back on without any problem. The following steps are provided by an electrician. Beverly Hills homeowners can count on The Electric Connection for more information about this problem.

*When you suspect a circuit breaker has tripped, turn off, unplug or shut down any electrical equipment, like computers, that can be damaged when the power is abruptly turned off and on.

*Go to the breaker panel and find the breaker that is flipped. You will be able to identify it by an orange color showing in most cases. The switch may look like it is in the middle rather than the far right or left. If it isn’t obvious which breaker has tripped, start at the top and work your way down until the power returns to the outlet.

If the power was fixed and the outlet is working fine, it may have been overloaded. Having too many things plugged in is one reason this happens. The problem could have also been a faulty appliance being plugged in.

If the power is not restored, it is time to call an electrician. Beverly Hills residents will be interested to know that about 25 percent of tripped breaker issues can be fixed with these steps. The other 75 percent of the time will require an electrician to come in and troubleshoot the problem. One common fix is a breaker replacement. Over time, breakers can become worn and faulty.

To avoid any electrical fire hazards, it is best to get the breaker replaced before it becomes a serious problem. Give The Electric Connection a call today if you need help with tripping circuit breakers.

Gas prices are fabulous—right now. We all know it is only a matter of time before the gas prices creep back up and we will once again be forced to pull from other areas of our monthly budget to afford to drive our vehicles. Many people have already made the switch to electric cars in an attempt to save money on their gas bills while reducing the strain on natural resources. There are plenty of different models of electric cars available that are sure to suit your needs. When you make an electric car purchase, you will likely also buy a charging station for you car. An electrician in Pasadena has some vital information for you. The team at The Electric Connection can also help answer questions about the electrical requirements of your electric car charging station.

When you buy your car, you will have the choice to buy a Level I or a Level II charging station. A Level I station is essentially a trickle charger. It sends a small charge to your car and can take upwards of 24 hours to fully charge the car. This charging station can be plugged into a standard outlet. However, it will need to be the only item plugged into that outlet and should be on its own breaker. If you need additional outlets or breakers, your electrician can take care of that for you.

A Level II charger is a fast charging system that typically fully charges a car in about 8 hours. This charging station requires a 240-volt outlet, which is not standard in your garage. It is a special outlet that will require installation by an electrician experienced with Pasadena electrical requirements. An inspection of your breaker panel will need to be conducted to make sure you have room for an additional breaker dedicated to your fast charging station. These are all things your electrician will evaluate on the first call. Give The Electric Connection a call today and schedule your consultation.

Fans in the attic? The idea at first may sound odd. We usually think of fans as blowing somewhere in our home where we can feel their effects, like hanging from ceilings or mounted in windows. Few people spend more time in their attic than they absolutely must, so it seems useless to install fans there.

However, attic fans can form an important part of maintaining the overall efficiency of your air conditioning system. If you’ve taken all the steps you can to keep your HVAC system working its best (regular maintenance, duct cleaning, changing the filter, proper insulation), attic fans will take you a step beyond. We’ll explain why putting in attic fans will benefit you.

Attics are both heat traps and heat escape routes. You can use insulation to stop heat from escaping in winter, but what about summer, when heat gathers in the attic and creates excessively high temperatures that will seep into other parts of your home? (Go up into your attic on a hot day and see what it’s like. It can be miserable. You don’t want any of that to get to rooms you actually use.) To stop summer attic heat, you’ll need attic fans.

Attic fans should be wired to a thermostat that will turn the fan on based on the temperature. This saves energy since you won’t have to keep the fan on constantly or continually check on it. The movement of air in the attic will lower the high temperature.

The first benefit is the most obvious: your home will not get as hot during the summer. On average, the temperature in the attic will decrease 50 degrees with a fan, which means a drop of 10 degrees in your house.

This not only translates into comfort, it also means savings on your energy bills. A cooler house requires less work from an air conditioner to cool it. You’ll spend less, and your air conditioner will not receive extra stress that will lead to repairs and possibly an early replacement.

Attic fans will also extend the life of your roof. Rising moisture in your home will get into the roof, eventually creating mold in the insulation and the roof material. In winter, the freezing moisture can be extremely damaging. Attic fans move moisture away and keep it from settling.

Hollywood has always tried to match movies up to the seasons to draw droves of viewers to the theaters: October is packed with fright-offerings, while the winter holidays skew toward warm and pleasing family films (as well as Oscar hopefuls). Valentine’s Day falls in an odd spot when it comes to the movie release calendar, however, since February tends to be a slower time for the film industry. The studios are as likely to slot strange movies that don’t fit anywhere else in their annual schedules into the Valentine’s Day weekend as they are films with powerful romantic appeal.

So, while the second weekend of February has featured hugely successful romantic comedies like Hitch, The Wedding Singer, and (of course) Valentine’s Day, some truly weird choices have debuted in this weekend as well. And a few have even gone on to tremendous success despite the bizarre match with the holiday. Here are a couple of the odder Valentine’s Day movie releases:

Whether you celebrate Valentine’s Day with a trip to the movie theater, or you have your own special plans, everyone here at FB Electrical Services hopes you and your loved ones have a wonderful weekend.