To most people, circuit panels are the first place they go when power fails to a room.  The loud click heard when a space heater or hair dryer overloads a circuit usually calls for a quick trip to flip a circuit breaker back on.  Every building depends on the circuit panel for safety and electrical management for the home.  The electrical panel for your home, along with the attached circuit breaker, serves to delegate power throughout the home.  By splitting up power demands, it prevents overloads in separate rooms and isolates individual features and appliances.

You may be wondering why we need to split up circuits the way we do.  If all of our devices operate on 120 volts, why do we need separate circuits?  The answer has to do with the physical quirks of wiring.  You see, while everything operates off of the 120 volts delivered by your home’s wiring, the power demands are different for each device.  As power is applied to a circuit, current flows over the wiring and heats it up.  The higher your power demands, the more current is flowing through the wires.

The wires in your home can only handle a set amount of current (most circuits are 20-amp circuits) before they overheat and begin to ignite insulation around them.  If you placed every light, appliance, and TV in your home on the same electrical circuit, you’d reach this thermal limit almost immediately.  To prevent his, we install circuit breakers to help separate energy demands to specific rooms.  We also separate the energy load to create special appliance circuits.  This is why your HVAC unit is on a separate circuit from your kitchen and your laundry room.  Appliance circuits use thicker wires which are designed to handle higher electrical loads.  High current circuits are expensive, so homes are designed to use them sparingly.

This is also why you should only ever replace breakers and fuses with new units that have the same tolerance.  Circuit breakers are designed to be the weakest link in a system.  They must trip before anything on the circuit itself would fail.  This safety feature means that the breaker will trip before wiring overheats or appliances are damaged by high-current draw.  If you do need to replace a breaker, always match it with the same current-rating.

Power surges are another reason we separate circuits in a home.  Whenever a load is applied to the system (you turn on a hair dryer, electrical appliance, or even a lamp) inrush current is also applied.  Inrush-current is the initial surge of power that occurs when current is increased.  Extra power is applied across the system, which causes a risk of electrical damage when a high-power device is applied to a low-power circuits.  To mitigate this, high-load motors such as those in power tools, HVAC systems, and other appliances are plugged into special appliance circuits.  This is also why you should plug sensitive low-voltage electronics into surge protectors.

Sometimes electrical panels can wear out.  While the signs are clear when you know what to look for, without experience you have no way of knowing if it’s time to replace your panel.  Get an inspection for your electrical panel if:

If, however, you happen to notice one of two logos, Federal Pacific Electric (FPE) or Zinsco, you should call for a replacement immediately.  These older models of electrical panels are unsafe and should be replaced quickly.

For the best in quality electrical repair work and installations, contact the professionals at Custom Electric!  Be sure to check back here each week for helpful advice, news, and guides or follow us on Facebook and Twitter!

Categories: Residential« Mood Lighting for Romance  |  Extension Cord Safety »

If you want to take your lighting customization to the next level, try a new smart phone controlled LED light bulb. You can change this light bulb’s color temperature, along with its brightness, and even place it on a timer to help your kids learn how to fall asleep and wake up on their own.

3. Light Layers

Here’s where a bit more magic comes in. We always recommend using multiple light sources in whatever room you decorate. It adds visual interest, useful illumination for tasks, and helps make a space feel more inviting. In the the kids’ room, adding light layers the perfect opportunity to encourage self-expression.

You may not be aware, but you can have Top Dallas Electrician, ElectricMan Inc. can offer a way to avoid these charges, and Lower Electric Bills by making sure that you are using the least amount of electric company power as possible during peak times.

An Indoor Generator is a unique solution that allows you to store power, either from your power grid when it is cheaper, or utilizing other renewable energy sources, and decide when you want to use it. This highly intelligent equipment allows you to program when and where you get your electricity, providing incredible independence and capabilities for Lower Electric Bills.

Take this as an example.  One local electric company uses a general rule of enforcing peak usage fees between 4pm and 8pm, so programming your system to use power stored during off peak hours at these times will allow you to stop paying these peak usage fees, and only pay the standard rate for electricity during normal usage hours.  This is a far more effective solution, since it is impractical for most home owners to change their schedule and stop using power during these times.

Once you have an Indoor Generator system in place and programmed, the system will automatically switch to your stored power during the times that you have chosen, leaving you worry free about when you are using your electricity!