When discussing green energy solutions for the wind, a lot of people get nervous. People say wind turbines are unsightly or dangerous to wildlife. These people don’t realize that civilizations have been using wind power for a very long time.

As an alternative energy source, wind turbines produce a lot of energy and produce very little pollution. They are often are placed on hilltops or offshore. The winds offshore tend to be stronger and more consistent. In order to get the best unobstructed wind, feilds of turbines are usually built far enough offshore that they can’t be seen from the beach.

To understand the green energy solutions provided by the wind, you must first understand how they work. Wind is created by the sun heating the surface of the planet unevenly. With one side of the planet in darkness and the other in daylight, one is hotter than the other. Different air temperatures have different density. When hot air rises over cold air, wind is created. In any attempt to produce power, something is generated to move a turbine around. Common methods to accomplish this include running water or steam from burning coal. These methods are harmful to the environment, as they heat the water to unsafe temperatures or release toxins into the air. A wind turbine is a system that captures the kinetic energy of the wind to turn the turbine. Kinetic energy is energy caused by motion. When the turbine blades rotate, that motion causes a drive train inside the turbine to turn. A generator attached to the drive train captures the energy produced, and power lines whisk that power away to the consumer. There is no steam, no pollutants, and no dangerously hot water, only pure, green energy solutions.

The idea of the windmill dates back to the 7th century. In Persia, windmills were first used to turn the heavy mill wheels needed to crush grain into flour. They were mainly used for this purpose until 1887, when the first turbine was created to charge batteries in rural Scotland. The idea caught on fast, and by 1900, there were over 2500 windmills in Denmark. The Danes used the power of the wind to keep back the power of the sea, creating pumps for flooded areas. By the 1930s, many American farms used personal systems for battery charging, but it wasn’t until 1951 that one was finally connected to the power grid in the UK.

Modern turbines haven’t changed much from their original concept. They are made of modern materials and created on larger scales to capture energy more efficiently. One modern adaptation has been the ability to link several turbines together. This allows their energy to be combined and processed by a single substation, letting less power go to waste than if each were wired separately.

Halloween is a little over a week away, and whether you’re throwing or attending a party, taking your kids trick-or-treating, or getting your house ready for trick-or-treaters, it’s sure to be a night filled with endless fun – and scare. However, we want to help ensure that the kind of scare that may ensue is all in good fun, and not legitimate.  This is why we want to provide some helpful electrical safety tips to those planning on transporting party-goers or trick-or-treaters to another realm with their decorations.

Electrical cords in high-traffic areas can be dangerous as it can cause people walking over them to trip and get hurt. Furthermore, you should inspect your cords for exposed or frayed wiring. Wires that aren’t 100 percent intact increase the chances of electrocution and fire, so always err on the side of caution and replace cords that could pose a threat. While Halloween is intended to a night filled with surprises, but don’t let one of them be a trip to the emergency room.

To prevent guests from tripping over cords, consider purchasing cord covers or using duct tape. Your local hardware store should carry both of these.

Before hanging lights inside or outside, check the box to see that they are Underwriters Laboratory (UL) approved. This means they will have been tested and are completely safe to use. If lights are UL-approved and tested, you should easily be able to find the label on both the outside of the box as well as on the actual lights themselves.

Just like your electrical cords, you should always inspect your lights for frayed and exposed wiring as well as faulty plugs. If you do find that they’re not in good condition, the best thing to do is replace them. Continuing to use these lights will only increase the chance of electrocution and fire.

Don’t staple or nail electrical wires or cords because doing so could cause a malfunction in the system, sparks, or a fire. Furthermore, avoid attaching wires or cords to anything metal. Follow the directions closely to ensure safety.

Leaving for work? Going to bed? Don’t forget to unplug your lights and decorations! When you leave things plugged in for longer than they should be, you run the risk of having overworked bulbs and wiring, which could lead to a fire. By unplugging them, you can have peace of mind while you’re away, not to mention, you’ll save money on your utility bill!

The best Allen electrician can tell you that chances are, your air conditioning unit is probably going to be the most frequently used electrical appliance in your home this summer.  Making sure that the a/c unit is running efficiently and safely is the best way to save money and prevent costly and dangerous electrical problems. Still, as the best Allen electrician will also tell you, preventing electrical issues can be difficult for someone who doesn’t recognize electrical problems immediately. After all, most of us who are not professionals probably don’t.

Surprise! It’s NOT Your Unit

As the temperatures rise this summer, keeping up with the maintenance of your air conditioning unit is one of the most important things you should do. However, when customers hear about maintaining their a/c unit, they often think in terms of Freon and condensers. The truth is that, although those are clearly important, one aspect that is often overlooked is the electrical part.

It may surprise you to know that calling an air conditioning guy when your unit is on the fritz isn’t always the right thing to do. In fact, any Allen electrician will confirm that, indeed, half the time the problems aren’t with the a/c unit but with the electrical system. If the problems are electrical, they can result in dangerous blowouts and burnouts that could cost you a fortune—or even your home, if a fire were to start. So, with so many things that could go wrong, how can you be sure that the problem calls for an Allen electrician and not an air conditioning repairman?

Air Conditioning Electrical Safety Tips

For instance, did you know that a lot of electrical problems arise when swapping air conditioning units? Something as deceptively simple as trading your current unit for another one, especially if the new unit is larger, can wreak havoc on your electrical system. The amount of wattage required to power the new unit can result in overloading, overheating and damage to the unit as well as to your home’s electrical system. You can burn the lines quickly. Some who think that they have found the solution in splicing their lines to accommodate a newer unit may also be in for a dangerous wake-up call. Splicing lines is never a good idea. When in doubt, call your local electrician. He understands what should be done.

Another thing that your electrician understands that you may not be aware of is that you need him to come out and inspect your circuit breakers regularly to make sure that no wires are melting, no circuits are going bad, and there are no potential fire hazards looming. Because a/c units consume so much power, many times they are wired directly into a circuit breaker. Loose connections in the circuit breaker can cause many problems, including irreparable damage to the electrical system. Be sure to always have an electrician come check your breaker and wiring to be on the safe side.

The electrical work is not limited to the obvious parts of the unit that may need help. The Forced Air Unit (FAU) part of your air conditioning unit is one of the most prone to electrical failures, and yet it is the one part that is often overlooked because it’s located somewhere in a closet, a spare room, or a utility space inside the home. The blower fan inside the FAU often blows out, causing issues with the overall functioning of the unit. Here’s the best way to prevent this: Make sure your electrician does routine maintenance on every part of your air conditioning unit, including the FAU, to prevent blowouts.

Electric Man: Best Allen Electrician

The best Allen electrician makes no bones about the importance of checking your electrical systems when turning on your air conditioning for the sizzling Texas summer, and how much you can save on your summer electricity bill, repair costs and a/c maintenance and repair. As summer heats up, let the team at Electric Man take a look at your unit and help you save money, time and repairs. For more helpful tips, read ElectricMan’s blog or connect with us on any of our social communities. If you have any questions, feel free to call us at 972-792-7270, or use the Contact form on our website!

Between buying presents and decorating your home, the holidays can get expensive. Not to mention, your

Let's face it: stringing your house with thousands of additional holiday lights is going to get the meter running in overdrive. To help put this in perspective: Americans spend

When you're hosting loved ones over the holidays, you have more lights turned on throughout the house as guests fill up previously unused bedrooms. Offset this increase by limiting the amount of time that you keep the decorative lights on with a timer. These decorations may be festive and amp up the Christmas spirit, but you only need to leave them on for a few hours every night to enjoy them.

If you really want to set the mood, rely on candles and the fireplace to provide light as well. This small adjustment can make your home feel more intimate and ignite the holiday spirit in all of your guests. Just remember to follow the necessary

You're cooking for a horde of people when the family stops by for holiday meals. Between your electric stovetop and microwave, the wattage is going to be through the roof. To minimize costs, optimize the preheated setting of an oven.

Preheat your oven only when you are ready to use it and cook your dishes at the same time (if they need the same temperature) or in a row (from lowest to highest temperature). This will prevent wasting the energy needed to preheat the oven prior to cooking.

By following these five electric bill savings tips, you can prevent your debt from being out of control when you start the new year.