If you’ve ever watched the show “Holmes on Homes” on HGTV, you’ve likely seen the problems associated with old or faulty wiring.  Mike Holmes tends to get very agitated by safety issues, and for good reason.  Each year, over 40,000 homes suffer fire damage due to home electrical problems.  These electrical fires account for hundreds of deaths and thousands of injuries.  And what’s the main culprit?  Old wiring!

If you live in a classic home built before 1940, chances are you have old wiring in the house.  You may have knob-and-tube or Romex wiring, both of which can become brittle over time.  The insulation dries out and starts to crumble, causing the inner wire to become exposed. The cloth insulation around the wire deteriorates with age and eventually becomes unsafe.

But perhaps one of the biggest threats of Romex and knob-and-tube wiring is that these types of wires aren’t grounded.  That means if one of your appliances shorts out, you could become the path to the ground for the electricity.

Even if your home is only 20 or 30 years old, you could still experience electrical problems at home due to a lack of capacity.  Most homes built more than 10 years ago are not designed to handle the amount of electronics we use today.  Think about it:  if your house was built in 1980, it was built before home PCs and laptops and HDTVs and surround sound and all of the other toys and gadgets we use today.  These appliances can draw a lot of power, and your current electrical wiring may not be up to the task.

If you own one of the one million houses in the DFW area that’s more than 20 years old, it’s a good idea to have a licensed electrician come out and take a look at the wiring.  He or she can make sure that your house will be safe and productive for many years.

By Clarissa Allison | December 2nd, 2016

When it comes to choosing which manufacturers to represent, several things are taken into consideration. Longevity, reputation, variety of selection, and response time are all paramount. This week LouieLighting.com would like to introduce a manufacturing partner we are proud to showcase: RAB Lighting.

RAB Lighting has been a leading manufacturer of sustainable indoor and outdoor lighting fixtures since 1946. Their reputation is grounded in the finest manufacturing, supported by a growing infrastructure complete with sophisticated facilities and engineering capabilities. Known for its cutting edge product design, quality, and customer support, the company operates the 6 acre corporate headquarters and manufacturing facilities in Northvale, New Jersey as well as locations in China, Taiwan and Malaysia, from where RAB is serving a constantly growing lighting market.

In 2002, RAB Lighting provided the Vaporproof fixtures which formed the Olympic Rings – this project resulted in the largest sign in history. What a feat! Accomplishments such as these demonstrate the pride and craftsmanship central to the brand.

In the 30 years I’ve been an electrician, I’ve had a lot of time to think about what qualities make the best Dallas Electrician the best.  Obviously, there are a whole lot of factors that go into something like that:  quality of service, friendliness, willingness to help.  But let’s face it; at the end of the day, the best electrician is the one who can save you money.  So, I’d like to share some money saving tips with you.  And I‘m going to start with the biggest, most effective tip of all.  Ready?  Here it comes.

Turn your stuff off

That’s it!  Turning your electrical devices off when you’re not using them is the best way to lower your home electric bill now, I know what you’re thinking:  “That’s not a very fun answer.”  Well, you’re right:  there are certainly more interesting ways to save money on your electric bill (and I’m going to share a few of them with you right now), but it’s important to start with the basics.  So, what can you do to save money without turning things off?