In one of our recent blog articles, we discussed Indoor Electrical Safety and the areas of your home you should be aware of in order to prevent a fire or potential injury.

In this article, we will be going over Outdoor Electrical Safety – safety measures that are just as important if not more important than indoor electrical safety measures. Being outdoors, your devices, tools, or cords are exposed to temperature change, weathering and tampering that could reduce the safety and security of your home.

Review and follow these basic safety rules when using electricity outdoors. If your outdoor activities do not abide by the safety guidelines discussed, consult an electrician and immediately resolve the issue.

Safety Rules:

For more indoor or outdoor safety rules and guidelines, contact Expert Electric. 604-681-8338.

2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.

Property owners have a responsibility to their tenants to keep a house or apartment in good working order. This includes the electrical portion of the home. Property owners or property management companies have to be on call 24 hours a day to handle any emergency. And because of that, you need an electrician in Glendale who is also ready to take your call anytime, day or night. At The Electric Connection, we understand that need and make sure there is always somebody to take your call. During business hours, a live person will answer the phone and after hours, there is an on call service number available.

It is crucial to any property owner they have a company they can rely on to take care of every electrical problem, whether it is big or small. It is also very important a person can rely on an electrician to make the best call to fix a problem. In most cases, the property owner will not be on the premises when the electrician goes out to investigate a Glendale electrical situation. Because the property owner, not the tenant, will have the final say in what repairs are made, it is very important there be an open line of communication between the electrician and the management company or the owner. If an electrician realizes a diagnosis of a problem may take several hours, it should be communicated up front before any work commences.

There is also the sensitive nature of telling a tenant too much about the situation. Of course some information is necessary, but ultimately, it is up to the owner or manager to choose how much a renter knows. You will want to make sure you hire a company who employs electricians that are friendly to tenants, without divulging too much information. If you are in need of a company to service your rental properties, give The Electric Connection a call today.

By: Kellie Pearson

The future looks bright here at Mr. Electric®, and we hope the same for you! As you are mentally preparing for the New Year ahead, maybe you are planning your goals and resolutions for personal development and improvement. This video by our president, Joel Worthington, is sure to motivate you to achieve them. We also want to encourage you to consider your home’s development and improvement, too!

When you think about your home’s electrical system, what can be improved? What can be replaced and updated? We have put together five tips to help you get started on getting your home’s electrical system in tip-top shape for the New Year. 

Although they initially cost higher, LED Energy Star qualified bulbs end up paying for themselves in energy savings in about 10 years. They use 75 percent less energy than incandescent bulbs and last 35 to 50 times longer. Plus, they offer more peace of mind since they emit very little heat, decreasing the threat of an electrical fire, and are much more durable, so they won’t shatter all over the floor. They’re also guaranteed for three years minimum, which is above and beyond the industry standard, so you’ll save on maintenance costs as well as energy costs. Basically, there’s no excuse not to get them!

Did you know that you’re technically supposed to do this every month? Not many consumers actually do this, but a new year is a great time to put this to practice and schedule it along with your other monthly home maintenance routines. You’ll find these outlets in moisture-prone areas such as the kitchen and bathroom as the current National Electrical Code requires. Simply press the test/reset button and make sure the outlets trip and resent correctly. If they are malfunctioning, call your local Mr. Electric to have them replaced to reduce electrocution risk.

Replacing the batteries should be done at least once a year, and both of the detectors should be tested monthly to ensure proper functionality. And speaking of replacing, how old are your detectors? Remember that smoke detectors need to be replaced every 10 years. Depending upon the model, older model carbon monoxide detectors should be replaced every three years, and the newer ones, every 5-6 years. Make safety a priority for your home and get this done!

Power surges can enter your home unexpectedly during a stormy night, a random power company disruption or operation of a heavy-duty electrical appliance. They destroy electronic devices in their path and at times cause fires as well. It is unfortunate when your Mac or PC dies, but even more so when your photos, documents, music and other personal content are lost along with it as well. To reduce damage from power surges, have a whole house surge protector installed by your local Mr. Electric at the panel and additionally multi-outlet power strip surge protection for delicate circuitry, telephone and cable lines. This will ensure both main zone as well as secondary zone surge protection to absorb any excess power that seeps through the primary protection.

This can be done in a variety of ways: turning lights out after you leave a room, unplugging and turning off electrical devices when not in use and ensuring lighting and appliances are Energy Star qualified. Perhaps you can create a friendly family competition to see who can use the least amount of electricity, or even consider looking into installing a solar energy system for your home. Whatever you choose to do, remember that you can also call your local Mr. Electric to perform an energy audit for your home to ensure its electrical system is operating at maximum efficiency.

We hope you find these tips helpful to make your home’s electrical system the best and brightest it can be, and we wish you a Happy New Year from all of us at Mr. Electric!

When it comes to residential electrical work, most people just call up an electrician without a second thought. And for good reason – working with electricity can be difficult and dangerous if not done properly. However, there are some simple jobs that amateur electricians can perform on their own if they have basic tools and experience. Read on for tips on how to run electrical wiring behind your walls without tearing up your home.