Not only will the electrician be up on all codes, he will be bonded and insured. You have complete peace of mind that he is doing the job right – the first time.

So what do you need to know?

Well, let’s talk about your needs. Are you replacing an outdated outlet with a new GFI? Are you adding a new outlet so you can plug in your computer and printer without disturbing the other appliances, lamps, clocks, etc. that are already using wall outlets? Are you installing a new outlet on your back porch where you can plug in a new ceiling fan? You can’t wait to get that new hot tub filled and ready for fun. Fill it up and plug it in. Right? Wrong.

First you need to know whether what you are using is for a standard 120 volt home outlet. Some appliances, like hot tubs, call for a larger capacity. Replacing an outlet can certainly be simpler than creating a new outlet. How much do you know about your electrical panel? Is there a free circuit? How do you determine if your panel will hold the new outlet? Do you know enough to keep you and members of your family from being shocked or electrocuted? It seems exaggerated, but unintentional shocks have happened.

How much do you know about wiring?

You may think you are cutting corners by purchasing the actual wires on your own. Are you sure you know what size to buy? Electrical wire is sized on the AWG system (the American Wire Gauge).  You need to know what the capacity for the wire will be and what the wire feed will be to make a sound decision.

If you go into a hardware store or home improvement store you will be amazed at the number of different wires that are sold. The each have a place and purpose in your home. Your neighbor said that he used aluminum wiring when he had his electrical outlets installed. Did you know that copper wires have been determined to be the best in today’s environment? Just look at the number of people stealing copper and you will realize that copper is now in demand.

Things a pro will know

You electrician will know exactly how much current the gauge of wire will safely carry. When a novice looks at the wiring it is obvious that the larger the gauge, the more electricity it can handle. Plus, the pro will know if your intended ampacity matches the circuit size on your electrical panel.

When you want to replace or upgrade electrical outlets, the smart thing to do is let a licensed professional do it. It will be done safely, efficiently and correctly.

Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be proper grounding as lack of it can result in power loss or a fire. Aside from this, if you require any additional outlets, your electrician will be able to install those for you as well. Installing additional outlets requires replacing a segment of the wiring and cutting into the walls, and this is something you should never do on your own. Many new electrical gadgets come with USB charging systems and you can get the local electrician to replace some of the standard ones with the USB ports, if required.

There are times when homeowners feel that the outdoor spaces on their property can do with better illumination. If you want new security or ambient lighting installations, you should just call in the electrician. He will extend the wiring to the outdoor spaces and ensure that it has the proper grounding as well. They will provide advice on which electrical fixtures would work best in an outdoor setting.

This may seem like an easy job, but it’s best to get a professional electrician to handle this for you as well. The electrician will check whether the amperage is sufficiently high to support the wattage of the new light fitting. If it is lower than that, the electrician will have to extend an additional wire from the main circuit breaker.

Aside from this, even things like fitting powerpoint covers and replacing light switches is something that only a certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

We at Allround Electrical can provide excellent electrical upgrade and maintenance solutions. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

Enjoy the next free CEU Webinar for Designers and see how you may engage and keep a loyal clientele with the latest techniques in social media.

This is an opportunity you do not want to miss.  Creating an effective and efficient Twitter profile will attract potential customers and expand your consumer base.  Explore the world of Twitter.  Learn and implement tactics proven to manage and expand your client base through the most up-to-date social media network.

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.