Get him two Battery operated LED Picture Light.

source) Make sure your BBQ Master has enough light to control the flow of wickedness with the Black Mo Tools Axe by Brook & Hunter and a Power Box 360 stereo by Bosch is a dust and moisture resistant powerhouse with a rubber cage exterior. Rock the night away with a LED Headlamp for smaller, intricate ones that need direct light.

You know the kind — he has the biggest TV you’ve ever seen and has an entire room devoted to it. Upgrade the man cave with his favorite LED Fiber Optic Star Ceiling Kit.

This is the second blog post in this year’s 15 smart gift ideas for students of any age. Visit our Holiday Specials!

The electrical panel inside of your home or office is where the breakers (or sometimes called switches) are located.  This is the “heart” of your electrical system.  Just like the heart inside of your body, if this major organ does not work properly, your blood circulation and limbs don’t stand a chance.  You could look at your electrical wiring as being your blood vessels and your appliances as being your limbs.  If your electrical panel, “aka” heart, is healthy and strong, your electrical wiring will operate properly, allowing all of your appliances to last longer.  Beware of old electrical panels; these could become a hazardto your home or business.

LED cove lighting is a great way to add accent lighting or color to any room, and LED strip lights are the perfect product for the job. LED strip lights can be used for any type of RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. variable color temperature strips are also available and can be used with a compatible controller and remote. Installing LED cove lighting is easy, and we’ve provided basic instructions for a standard L cove, recessed ceiling/tray ceiling cove, or crown molding cove in a 16-by-16-foot room. We recommend that you have a certified electrician wire your strip lights to power.

Tools and Optional Materials:

The way you install the strips or even the number of strips used might vary depending on the room size or the style, shape, and size of your cove. The steps and materials needed for this particular installation could be used in a room with a standard L cove, crown molding cove, or recessed ceiling/tray ceiling cove. The photos below show several different cove types.

DIY “L” Cove

Valence Cove

Crown Molding Cove

8) If desired, use a double-sided 3M foam pad to mount the amplifier in the middle of strips 1 and 3. Cut the foam pad, and use it for both amplifiers.

9) Repeat steps 6-8 for strips 2 and 4.

10) If you are experienced, connect your power supply to power. Otherwise, hire a certified electrician to set up power for your new LED cove lighting.

If you’re dying to install your new instructions for how to install a light bar. These instructions include options for installations with or without a wire harness and for connecting to existing LED lights. Installation will vary based on the type of vehicle, existing lighting setup, and chosen wiring method, but these instructions can serve to give you a general idea of the process. Light bar mounting instructions are also available and are listed by WH-DTS10, WWH-DTD30; (ATP) WH-ATPD20, sdoptional mounting brackets; be sure not to overtighten the hardware (you will need to adjust it in step 7).

3. Route the lighting side of the wiring harness from the battery to the light in a safe, secure manner. Connect the harness to the light. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wiring harness is a safe path to follow. Some lights may not have DT or ATP connections on them, but the connectors can be added from the harness kit or purchased separately (ATP-FPT).

4. Continue to route the switch portion of the harness to the desired location of the switch. The switch may need to be unplugged from the harness to make routing of the harness easier. An optional remote-controlled switch (RS-x) are also available with different legends.

5. Connect the black (ground) wire with the large ring terminal from the harness to the negative battery terminal. Connect the red (power) wire with the large ring terminal from the harness to the positive battery terminal.

6. Secure the relay to a suitable location, and test the light to make sure the circuit works.

7. Finally, aim the light in the desired direction, and tighten all mounting hardware.

3. Connect the black ground wire of the new light to the ground wire of the old light with solder and heat shrink tubing (PSC-x). Connect the red power wire of the new light to the power wire of the old light.

4. If the new LED work light or off-road light bar has an ATP or DT connector that you wish to utilize, corresponding ATP (DT-MPT) pigtails are available.

5. Finally, aim the lights in the proper direction, and tighten all mounting hardware.

1. Find a suitable mounting location that will allow for running wires and mounting the LED light bar. Mark where your holes will be for the light bar brackets or mounting feet. Check behind drilling locations to ensure nothing will be damaged. Drill appropriate-sized holes.

2. Mount the lights with the provided hardware or with DT-MPT or RRS-SP, RRS-SPx, or RCS-RF25A) under your hood to speed up install time and avoid routing wires through your vehicle’s firewall. Route another run of red wire from the pigtail adapter (connected to the light) to the output terminal of the switch. Be sure to avoid heat sources and any moving parts while running your wires. Prolonged chafing of the wires may lead to a short in the circuit. Typically, following the vehicle manufacturer’s wire harness is a safe path to follow.

4. Be sure to double-check for all obstructions and proper clearance. Drill an appropriate sized hole for the switch, and mount it.

5. Connect your black wire to the negative battery terminal. Connect your red wire to the switch input terminal and to the positive battery terminal with an appropriate-sized fuse holder (MAF-x) installed within 18 inches of the battery. You will have to cut your section of red wire to allow for the fuse holder to be installed between the switch and battery. Connect your other run of red wire to the switch output terminal.

6. Finally, aim the lights in the proper direction and tighten all mounting hardware.

Most Maryland, Virginia, and DC homeowners pay little attention to their main electrical circuit panel until something goes wrong, such as a tripped circuit breaker. However, when the areas around your outlets have darkened and/or heat is coming off of your main circuit box, these can be indications that something is wrong with your wiring system even if the circuit breaker doesn’t trip.

Since there are more than 370,000 house fires in the U.S. each year, causing around 15,000 deaths and injuries, paying attention to your electrical panel is more than just a good idea; it’s essential. Catching issues like a hot circuit breaker early can not only help to keep you and your family safe, but can keep the cost of fixing the problem in check and prevent property damage.

There are a number of things that can cause your circuit breaker to give off heat. Some of the more common include:

Electrical work is too dangerous to work on yourself. It’s important to hire a licensed electrician to make sure your wiring is handled properly and safely.

Kolb Electric has the experienced, licensed electricians you need to keep your home and your family safe. If you have questions or concerns about a hot circuit breaker or other wiring issue in your home, call us for an evaluation. Our staff has experience in a variety of home wiring projects, from re-wiring an entire home to fixing loose electrical connections. We’ve been helping Maryland, Northern Virginia, and Washington, DC area homeowners with their electrical needs since 1925. Call us at 877 287-1179 to schedule an appointment today.