Whether it has to do with a simple home improvement or a more in-depth renovation, a permit for electrical work is required to obtain permission from the governing authority to go forward with the project. Permit pulling—requesting a permit from a governing authority, which could be State, County or City —can be challenging for homeowners who are not familiar with electrical plans. but the process of pulling permits for electrical work is fairly straightforward if you understand and meet all requirements for electrical contractors.

Each city, county and state can have varied building codes, so it is important to use a professional who is versed in navigating this process. Permit pulling requires first submitting an official application that includes a schematic of what electrical work is going to be done. There will be a permit fee involved to cover the application cost, the review and the inspection. Once a plan is approved, a permit will be issued, and work can begin. On-site inspections will be conducted to ensure that all of the work conforms to the permit as well as building codes and plans. Depending upon the size of the project, there may be more than one inspection, usually a rough and final or possibly partials of either. These inspections serve to protect homeowners from faulty or possibly hazardous work. A code official will come by at the project end in order to provide all required documentation. Final approval will only be given once full code compliance is met which could mean NEC, UBC or IBC regulations. If the homeowner is completing the electrical work as a do-it-yourself project, it may take multiple visits from the code official before a final approval is provided, depending upon the skill level of the homeowner.

We may be entering February, but if last year taught us anything, it’s that winter can throw us a few curve balls, even when the end of the season ought to be in sight. There is plenty more cold weather ahead of us, and likely some more snowfall to go with it. You need to know that your heating system in Boston, MA is not only to heat your home effectively, but also that it will do so efficiently. You don’t want to wait around in discomfort while you look forward to the start of spring, after all. That’s why we’ve put together a few tips to help you enjoy efficient heating in your home.

There are a lot of beautiful old homes in this part of the country. Of course, homes of this age were likely not constructed with the same attention paid to energy efficiency as newer ones are. Simply investing in some weather stripping with which to eliminate drafts in door and window frames can seriously help you to boost energy efficiency in your home. You may also want to consider wrapping your windows with plastic sealing, available at just about any hardware store, in order to help prevent drafts.

You may not realize just how huge of an impact your thermostat can have on the overall performance quality and efficiency of your HVAC system. Simply upgrading an old, outdated thermostat to a programmable model, for instance, means that you can come home to comfort every day, without maintaining that temperature in your house while it is empty for hours at a time. Program it to cater to your own personal schedule, and enjoy great comfort with increased efficiency.

Never convince yourself that you can skip over an annual heating maintenance service. Even if you didn’t have your system serviced going into winter, you should have it maintained at the close of the season. The time of the year doesn’t matter so much as the fact that it is serviced at least once a year. It’s not too late to ensure the success and efficiency of your heater with routine maintenance.

You look up. Movement. What is this? It looks like your fluorescent lights have come alive! They’re swirling and spiraling, like each one has an angry snake inside. This is no good. The light level in your room isn’t even. The fixtures flicker, annoyingly, and your eyes start to feel overworked and tired.

Demand for the electric cars has been on upward trend over the last few years. However, manufacturers and car owners still face a challenge due to the limited battery capacity which necessitates the need to keep on recharging after traveling a certain distance.

Despite the benefits of charging the electric cars at home, most residential installations, especially the older ones, may not support the systems. But the consumers can upgrade these to accommodate the additional load. The upgrade depends on the existing wiring, panel, capacity and charging station power requirements.

electrical wiring and capacity, and the charger voltage and level. The electric car owner must first decide on the preferred type of charger and time, and then compare its power requirements with the existing capacity at home.

Some chargers require 120V while others work on 240V and each takes different times to fully charge the batteries.  Higher voltages will require dedicated circuits and upgraded wiring, breakers, panel and service entrance.

Other upgrades include the price plan, metering, and compatible outlets or provision for hard-wiring. If you are installing a DC charging is very fast; it uses about 400-volt direct current and is capable of reaching full charge in about 15 minutes. This is a complicated method and may require significant upgrades in the home electrical system. It is also very expensive and rarely used for home charging.

upgrade your wiring or install the product if you system capacity can support it.

It is essential to ensure that the electrical panel and dedicated circuit have the capacity to handle the system. The installation of the charging station is similar to other high power equipment, such as clothes dryer, and should comply with all the electrical codes and requirements.

Each charging station should be on its own dedicated circuit with adequate capacity and protection. However, the it can still be connected to an existing 40 Amp circuit, such as the one for the kitchen, provided that there is a locking mechanism to ensure that only one load is connected at a time.

Charge stations may be hardwired or plug-equipped to connect to the electrical outlet. For the plug type charger, you will need to have an electrician to wire the compatible electrical receptacle according to the codes.

You may add ventilation to improve the cooling of the charge station if it is in a location with poor air circulation.

Charging electric cars at home is the desire of the majority of EV owners. It cuts down on the cost and time to drive and wait at a public charge station. In addition, it does not interfere with the daily activities of the electric car owners since they can charge at night.

Unfortunately, there are several homes without the provision or capacity to support the charging stations. However, the EV owners can consult the car dealers, and then engage qualified electricians in upgrading the existing electrical wiring. This will enable them to conveniently charge at home.