Decorating your home and the outdoors is an extremely popular activity starting in about October. October and fall weather tends to be very wet. Putting electric-powered decorations outside can get tricky. Every year, it seems like we try to go a little bigger with our holiday displays. Every year, manufacturers are putting out bigger, cooler and more elaborate decorations for us to add to our collections. If you are one of those people who likes to have the coolest holiday display on the block, you probably rely on electricity to run lights and some of the moving figures placed outside or around the house. That means you need to brush up on your electric safety knowledge and an electrician in Santa Monica is here to help you do just that. You can always count on The Electric Connection to give you accurate information.

One of the most important safety rules to keep in mind is to pay attention to what the decorations and lights are designed for. If they are designated “indoor use only” don’t attempt to put them outside. It could result in the item shorting out and possibly sparking a fire. This applies to extension cords as well explains an electrician. Santa Monica homeowners need to follow the guidelines on the cords. Outdoor extension cords will generally be round and brightly colored.

Do not connect more than three strands of lights together. Read the manufacturer guidelines on each of the boxes to determine if you can put several decorations on the same cord or if they will need separate ones. Avoid connecting more than 2 extension cords together. If you need additional outlets outside, hire a Santa Monica electrician to do so for you. This can make decorating a breeze. Give The Electric Connection a call today if you need additional outlets or have questions about electric safety.

As energy costs continue to climb, and many people become more concern with their overall impact on the environment, solar power has become a serious consideration for more homeowners than ever before. When choosing to have solar installers install solar panels on your home, one of the first things that you need to do is get a good estimate of your home’s average energy usage. You can then work closely with your installer to determine the size of solar power system that works best for your home.

Gather Your InformationThe easiest way to get an estimate for your home’s average energy consumption is to gather your electric bills for the last year. You can then add all of the kilowatt-hours (kWh) that you used each month and divide this number by 12. This will give you the average number of kWh that you used each month. You can then divide this number by 30 to get a daily usage estimate. Because the average number of peak sun hours in the United States is 5 hours, you can divide this daily estimate by 5 to get an idea of how much electricity your system will need to generate each day during these peak sun hours.

Naturally, the number that you arrive to by this process is only an estimate. The cost of solar panels depends largely on the size of the system that you install. The estimate that you create will give you and your solar installers a good place to start when it comes to determining the size of your solar power system. If you are looking for more information about solar panels, the installation process, purchase and finance options, take a look at the rest of the information that we have available here at Solar Panel Info.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

Improving your home energy efficiency is a worthy and admirable goal. You can help reduce your impact on the environment while saving money with savvy decision making. However, the up-front investment for some efficiency upgrades is substantial, so always do your due diligence before you find electrician services and commit to buy. Read on to clear up some misconceptions about home efficiency and make sure your money is being put to good use.

You Don't Have to Sacrifice Your Comfort: It's true that the best way to conserve energy is to use less of it with strategies like turning off the lights or keeping the temperature lower in the winter. But that doesn't mean you have to sit shivering in the dark. The key to efficiency is to get the same amount of utility for less energy input. That means replacing old incandescent bulbs with LED versions, or investing in better HVAC technology like a smart thermostat. That way, you can keep your home environment tuned to your comfort while reducing consumption at the same time.

Don't Rush into a Big Ticket Item: The most dramatic way you can upgrade your efficiency is with a brand new heating or cooling system. Equipment efficiency has improved drastically in recent years, and new technologies like geothermal heat pumps, biomass boilers and solar panels can all reduce your bills dramatically. However, they aren't risk free. You’ll often face a significant up-front investment when you find electrician services for these installations, and the actual savings that you will realize can vary widely based on factors like the price of fuel. You could also see a loss if you make a big purchase and decide to sell your home soon after; there’s no guarantee you’ll recoup the cost in the selling price.

That's not to say you should avoid large efficiency investments – just look before your leap. You will get the best return from these items if you already need to replace outdated equipment anyway, and if you plan to stay in your home for many years. To reduce some of the upfront costs, you can also look for federal tax credits that refund up to one third of what you spend, as well as options to lease solar panels so you don't have to put any money down at all.

Don't Forget the Insulation: On the other side of the coin, new HVAC technologies won't do you much good if all that treated air just leaks into the outdoors. One of the biggest ways you can improve your efficiency is by plugging leaks and upgrading your insulation, which is typically a much cheaper fix. With a leak detector, some caulk and spray foam insulation, you can seal up your house with minimal investment, saving you money in the short term as well as preparing the house to get greater efficiency out of newer technologies.

For more straight shooting about how to get the most value for your efficiency investments, find an electrician to conduct an energy audit on your house. Your local Mister Sparky® is always available to help!