Smoke detectors (smoke alarms) are one of the most important safety devices in your home. If your home has well-maintained smoke detectors, the chances of your family surviving a house fire are greatly increased. From 2003 to 2006, 66% of fatalities due to house fires occurred in homes without working detectors (National Fire Protection Association).

Most homes have smoke detectors, but many times they are not located properly or are not working due to lack of maintenance. Of course, a smoke detector in the wrong location or one that no longer works because it has a dead battery provides no protection for your family. The Electric Connection, a fully licensed, bonded and insured electrician in Burbank CA, knows the most current code rules for smoke detector placement and they can install or replace your smoke detectors for you.

Maximizing Protection

Your family will have maximum protection if:

Can I install them myself or should I have my Burbank electrician install my smoke detectors?

You can purchase battery-operated smoke detectors from a hardware store and install them yourself. (If you decide to install your own smoke detectors, check your local building code for placing them.) For detectors that are wired into your electrical system, the U.S. Fire Administration recommends that detectors be installed by a qualified electrician. The Electric Connection, a local electrician in Burbank, can often schedule an electrical service call appointment for the following day.

Are they expensive?

Depending on the type of detector you decide on, they can run from $10-$40 each, not including installation costs. You can often get a ballpark price over the phone for installation pricing from a Burbank electrician.

How should they be maintained?

Most detectors start “chirping” when batteries have run down. In addition, the U.S. Fire Administration recommends testing them monthly. They recommend:

Are your detectors properly positioned?

The guidelines given here can help you determine if existing smoke detectors are properly positioned. If you are going to install battery-operated ones yourself, follow the placement requirements of your local building code. In general, it’s recommended that you have a smoke detector:

Within these general guidelines, detectors should be placed where smoke can be readily detected — high up on walls or on the ceiling (smoke rises) and at a distance from windows, fans, and vents that might blow smoke away from the detector.

If the smoke detector is wired into your electrical system, it should not be on a circuit that can be turned off with a wall switch. It’s always best to consult with a licensed Burbank electrician when it comes to hard wire some detector installations.

If a smoke detector is placed too close to a kitchen stove or shower, it can be triggered unnecessarily by steam or normal cooking smoke. Better to move it to a different location that also meets general safety guidelines and your local building code.

If you are uncertain about placement or need help with installation or battery replacement, call a qualified electrician in Burbank, such as The Electric Connection or visit our website.

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Is your outdoor lighting helping or hurting your home? At Kolb Electric, we believe that outdoor lighting is an important part of the overall look and function of your Washington, DC area home. From adding to your home’s security to making it look its best no matter what the time of day, outdoor lighting is an important part of your home. If you’re considering installing outdoor lighting in your home, here are some thoughts you need to consider.

Ready to install outdoor lighting in Washington, DC? Contact the Kolb Electric team now!

Are you considering ways in which you can improve your home’s appearance and security? Outdoor landscape lighting in Washington, DC can do both. By combining beautiful outdoor lighting with your home’s landscaping and adding lighting to areas that are dimly lit, you can increase your home’s value and appeal while decreasing the risk of theft.

Outdoor lighting brings several benefits to your home. Some of these include:

Kolb Electric understands how to design lighting plans for your Washington, DC home that provide all three of these benefits. If you’re looking to improve the look, safety, and security of your home then outdoor lighting is the way to go.

Before installing landscape lighting you will need to know the different types available to you. Here are some common options to consider:

LED lights are low-voltage lights that can illuminate small areas, like individual stairs, garden plants or railings. They don’t use much electricity and last a long time, making them an economical investment. They are available as individual lights, spotlights and rope lighting.

For homes with a pool, pool lights improve nighttime swimming by illuminating the water from below the surface. They can also be installed in outdoor hot tubs.

Pathway lights dress up a path and help reduce tripping hazards. These are often low to the ground and can be solar powered, drawing energy from the sun during the day and then expending that energy with a subtle glow at night.

Security lights light up dark spots in the yard to protect against intruders. Some security lighting is triggered by motion, while other lighting stays on all night long.

Which type of outdoor lighting is right for your home? The answer will depend on your goals. Whether you’re looking for additional safety and security, want to spruce up the look of your outdoor space or simply want to highlight a part of your outdoor space, you can find a landscape lighting option that will fit those needs.

If you’re looking to improve your home with outdoor lighting, you are going to need to make some considerations before you invest. Choosing the right lighting starts with understanding how you want to use it. Here are some considerations you can make.

First, decide if you plan to illuminate a dark area of your yard constantly or if you want to turn the lights off after enjoying them. If you’re going to leave the lights on all night long you may wish to invest in an energy efficient lighting option. The more efficient the bulb is, the less you will be spending on energy bills. Remember that you won’t need much light at night so low-voltage and efficient lighting is a great way to keep the energy bills in check.

If you feel that the high energy cost of leaving the lights on is a bad idea for your budget, consider using motion sensors in areas where you need lights for security or safety. Motion sensors will light up the space when someone is present, adding the safety you’re looking for in your home.

Finally, consider what you’re looking to illuminate. This will help you choose between the two main types of outdoor lights – uplighting lights and downlighting lights.

Uplighting lights shine from the ground up on a surface, like a landscaping feature or a tree. Downlighting lights shine down onto the ground, which can illuminate an unsafe area or highlight a plant you wish to show off. Both can be incorporated into your design as you work to illuminate your yard.

When you have a basic idea of what you want in your outdoor lighting, then the real fun can begin. The Kolb Electric team is ready to help you with the design process, so you can be certain your final project will do exactly what you want and need it to do. As you consider your design options, make sure you take these factors into consideration:

If you are ready to transform your home with beautiful outdoor lighting, Kolb Electric is here to help. Our design team and licensed electricians can help you with the entire process, from choosing the lighting that best fits your needs and tastes to installing it expertly. Let us help you create an attractive outdoor lighting scheme in your Maryland, Northern Virginia or DC area home. Give us a call at 877-287-1179 today, or you can contact us online.

The electrical field is one that has seen a number of remarkable discoveries over the decades. One very important lesson has been the aspect of grounding of electrical currents. It’s true that we need electricity for almost everything in our daily lives and can’t even imagine a world without it. However, it continues to be one of the most dangerous elements on earth. If you haven’t already properly grounded your home’s electrical systems, you are taking a significant risk by not doing so.

Every electrical circuit has an active wire which supplies power; there is also a neutral wire which is responsible for carrying the power back. There is a third wire (grounding wire) that can be attached to the power outlets & the electrical appliances and devices; this wire is connected securely to the ground in your breaker box.

This third wire is the additional path that the electrical current can pass through to be safely returned to the ground, in case there is a short circuit; this prevents any harm being caused to anyone. In the event that a short circuit occurs, the current flows through into this grounding wire and it’s when you notice a tripped circuit breaker or a blown fuse in the electrical main board on your property. If this wire hadn’t been grounded, it would have resulted in a fatal shock.

This is one of the most important reasons to ground electrical currents. It’s the best way to protect your family members from electrical surges when they are operating any electrical appliances in the house. In case a lightning strike causes an electrical surge on your property it can result in extremely high electrical voltages in your system. When the wiring has the proper grounding, all the excess electricity gets diverted into the earth, rather than burning everything that’s connected to your electrical system.

When your installation is grounded, it becomes very easy for the power to get directed exactly to where you need it; this allows the electrical currents to efficiently & safely travel across your home’s electrical system.

A properly grounded system makes it much easier for the power to be distributed in the right amount to the right places. This plays a significant role in ensuring that there is no overload in the circuits. The earth becomes the common reference point for all the different sources of voltage in an electrical system.

One of the primary reasons why grounding is extremely effective in keeping you safe is because the earth is an excellent conductor, and electricity always takes the path that has the least resistance. When you ground your electrical system, you are giving it a path that it can easily take, rather than into you; this can potentially save your life.

If your home’s electrical system isn’t properly grounded, you are just risking the appliances and equipment that are connected to your system, being burnt beyond repair. If the situation gets out of control that can also result in a fire risking your property and causing physical injury, sometimes even death.

If you aren’t sure about whether your electrical system has the right grounding, its best to call in a reliable local electrician to get it checked thoroughly. We at AllRound Electrical will check the system carefully and check it for any other potential faults as well. For more information, contact our friendly team at this number – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

LEDs are at the forefront of light industry discussion because they are such a gamechanger when it comes to energy efficiency and lifespan. But how do recent developments to LED technology affect the everyday consumer? What’s the simplest way to navigate this uncharted territory when shopping for LED light bulbs? The very recent availability of an LED replacement for the common household incandescent lamp has created a world of new potential, and along with it a whole new set of standards. In this post, we will be discussing the various ways to distinguish between the different LED options.