Home lighting serves two major purposes: functionality and aesthetics. When walking into a dark room, the last thing you want is to have to navigate to the other side to turn on the lights. This can be unsafe and highly impractical. When it comes to aesthetics, the right lighting can change an entire room and its atmosphere. With dimmer and three way switches, you can bring functionality and aesthetics to any room in your home.

Standard switches control a light fixture or set of lights from one location. For larger sized rooms or long hallways it isn’t practical to have one light switch placed at only one end or in the middle of the room. This is where three way switches come in handy. With a three way switch, you can have two separate switches to a single fixture or set of lights. In this way you can strategically place light switches around your home to ensure there is always easy access to light.

Three way switches can be complex and difficult to install. When replacing standard switch it can be easy to mix up the wiring and your light switch will no longer work. This is where a professional electrician helps you out the most. Plan out where you feel more light switches are needed and contact one of our electricians to install the switch correctly the first time and help you avoid a headache and potential safety risk.

When it comes to dimmer switches, not only can they help you accomplish beautiful lighting in your room, but it can also be a practical decision. With a dimmer switch you can adjust the voltage going to your light rather than simply having an “on” or “off” setting. With either a slider or a knob you can adjust your light so it is perfect for reading, movies, or a romantic evening.

Dimmer switches can also help you save money by lowering your electrical bill. By having the ability to lower the voltage to your lights, you can use only the electricity you need and lower the lights to the perfect level. Remember, if you are planning to use LED lights on a dimmer switch, make sure you purchase LED bulbs that support dimming. If you choose the wrong type of bulbs, your dimmer switch will not leave you with the desired effect.

The electrical system in your home is its most vital component, more so than its gas and plumbing. Without electricity, most basic tasks during the day are impossible—and they become worse than impossible at night. If you have an electrical system that is suffering from repair needs, you can’t wait for a full power loss before calling for repairs. Watch for the warning indicators listed below that will tell you to contact a licensed and experienced electrician immediately.

Call us for these services or for electrical system repairs in Mill Creek, WA.

Having power throughout your home isn’t something that you think about on a regular basis. In fact, when you flip the switch, you anticipate the light coming on. However, there may be a day when the power doesn’t work as expected. More precisely, you may find that the power in one room isn’t working while all other rooms are fine. What do you do when you don’t have power in one of your rooms?

The electricity that flows through your home powering the myriad of electronic devices your family owns is a system. There are numerous problems that can happen that could interfere in how the system works. Fortunately, when you have only one room without power, you can isolate the problem to that particular room.

Although there are many reasons you may not have power in one of your rooms, most of the problems will originate in the room since other rooms have power. The following are a few things you should consider when you are trying to isolate the problem.

Your breaker box is the point in your home in which you can safely interact with your electrical system. Within your breaker box are switches you can turn on and off to control the flow of electricity. When you have no power in one room, you may need to simply switch the breaker connected to that room off and then on again.

Many homeowners paint on occasion. In order to get a complete look for their rooms, they may take off the covers for their outlets and switches. If you have painted recently, then your switch or outlet may be the culprit.

Your covers hide all the wires running to your switches. If one of these wires were loosened while you were removing the cover, it could have caused the power outage.

The march of consumer product efficiency continues. Modems, routers and other internet equipment are the latest items to get a bump in energy efficiency thanks to a voluntary agreement between manufacturers and trade associations. The standards mean that new equipment should use about 10 to 20 percent less electricity than the gear currently on the market. The bottom line – reduced energy bills for consumers.

Homes Across the Country

The change is ultimately expected to affect 80 million homes in the United States. Currently, the terms run through 2017 and require manufacturers and providers to make their efficiency data available publicly – ask an electrician if you need help interpreting the data or picking out the best model once the new equipment hits the shelves.

“DOE appreciates industry’s voluntary commitment to improving the energy efficiency of small network equipment, and looks forward to the progress they can make and verification of the impacts at the appropriate time,” Dr. Kathleen Hogan, deputy assistant secretary for energy efficiency, U.S. Department of Energy, said in a press release. 

Preparing for the Internet of Things

The voluntary agreement was hammered out among the Consumer Electronics Association, the National Cable & Telecommunications Association and the companies that make the equipment. This efficiency upgrade comes at a crucial time – not only are modems and routers essential for internet access, they will only become more important as smart technology advances and more of your household systems are hooked up to the internet.

“This agreement will begin saving consumers energy and money – and do so long before any mandatory regulatory standards could take effect – while protecting innovation and competition,” Gary Shapiro, president and CEO of the Consumer Electronics Association, said in a press release. “By setting requirements for energy-efficient broadband equipment now, the agreement will lock-in efficiencies at the dawn of the Internet of Things, which depends on strong broadband networking.”

Following the Cable Box Lead

This agreement is similar to a voluntary deal worked out by manufacturers of cable set-top boxes, in which the companies worked with the U.S. government to set an attainable benchmark. The deals are voluntary out of practicality, because federal regulations can take years to take effect and can be quickly rendered obsolete by ever-advancing technology.

“Our industry has proven that voluntary, energy-conservation agreements are the best means of effectively improving energy efficiency, while recognizing the lightning-fast pace of tech innovation,” Shapiro said.

Similar to the set-top boxes, modems and internet equipment are nearly ubiquitous in U.S. households, and they draw power nearly all the time unless the family pulls the plug at night. That means there's a lot of room for cutting back on their electricity usage. If you aren't sure whether the energy savings are worth upgrading your modem or router, ask an electrician to help calculate your consumption and offer strategies on how to get the best return on your conservation investment.