Typically electricity and water don’t play well together, but modern technology has given birth to lights that can not only get wet, but be fully submerged underwater.

Color-changing capability, energy efficiency and custom lighting effects ramp up the cool-factor even more. There’s no end to their creative applications, but I’ve found that some people are prime candidates for these innovative lights.

This is really important! Note that there can be vast distinctions between the different lights that are labeled “wet location lights.” A light fixture that can withstand rain may not be able to withstand full immersion. It all comes down to a vitally important specification called an Ingress Protection Rating (or IP Code). For the purposes of today’s post, we’ll be talking about lights that are IP-68 rated. (Read more about that via

With over 1 million homes in the Dallas area over 20 years old, older home electrical safety is a major concern that should be assessed by a licensed Dallas electrician. Many homes in the 70’s and 80’s were built with electrical wiring and breaker panels that have been known to be a fire and electrical shock hazards. If you live in one of these older homes, and it has not been updated, it is very important that you have a licensed Dallas electrician come out and take a look at the electrical system in your home, to ensure your family’s safety.

Last winter may have been an exceptionally challenging one here in Massachusetts, but the fact of the matter is that every winter is a bit of a gamble as far as weather goes. One thing that you do not want to gamble with, though, is your electrical service. When you have a whole-house automatic standby generator installed on your property, you’ll never have to. This type of generator is wired directly into your home’s electrical system, and will monitor that system in order to ascertain if and when the power goes out. When it does, your generator will spring into action automatically.

Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.

Being the owner of a plant is a big responsibility and it is very important to keep your equipment in working condition. You need to remember that all your maintenance must be planned in an efficient way for both economic and energy efficiency.

Usually when you choose to partake in your routine maintenance, it may cause a delay in your production resulting in loss of income. All safety electrical equipment that is used on a continuous basis will require a lot more maintenance than your equipment that is used rarely, although they will still need to be maintained.

Even though you may maintain your equipment on a regular basis there will be times that your equipment could break. You will then need to take all costs into consideration before deciding whether you should repair the equipment or to just replace it completely.

To help you decide, you should analyze what you have already spent on the equipment as well as what it will cost to maintain it in the future. Once you have done that you should compare it to what it would cost you to acquire newer equipment that may cost less to maintain.

You could also hire a specialist that could create a breakdown of important factors such as the probability of the following:

To run a successful plant you will also need to keep the following important steps in mind: