A Tiffany lamp is a style of fixture commonly associated with the Art Nouveau movement. The term is sometimes used broadly to refer to stained glass but it gets its name from the original creator and design director, Louis Comfort Tiffany – the son of Tiffany & Co. founder, Charles Lewis Tiffany.

The first Tiffany lamp was produced around 1895. In line with Tiffany’s vision that nature should inspire design, each piece featured elements of nature or geometric shapes to create intricate patterns. Each lamp was handmade by Louis himself or by an artist in his studio.

The bases of the lamps were typically sculpted from bronze with shades created from hundreds of cut glass shapes fashioned together with copper foil. These works of art took many hours of skilled craftsmanship to complete and remain popular to this day, thanks to their complex beauty.

LED fixtures, such as

With energy consumption that is less than half of what 150-watt LED parking lot light that is a direct replacement for 400-watt metal-halide (MH) fixtures. That’s 250 watts less for the same amount of light!

The average price of electricity per kilowatt-hour (kWh) is 12 cents. To figure out the monthly cost of running 25 LED parking lot lights for 11 hours per day, use this formula: (combined wattage x monthly hours of use)/1,000 x price per kWh. For 25 LED lights, (3,750 x 330)/1,000 x .12) the total would be $148.50 per month or $1,782 per year.

When the same formula is used for 400-watt MH fixtures, the monthly cost is $396, and yearly cost would be $4,752. So, in this situation, switching to LED fixtures would save approximately $3,000 per year. When coupled with the savings on maintenance, LED fixtures can save $6,470 per year. At that rate, the cost of 25 $340 LED fixtures would be recouped within two years.

Left: LED wall packs; Right: HID wall packs

Unlike LED fixtures that light up instantly, HID parking lot lights require a warmup period of up to 10 minutes before they reach full brightness. They also can’t be turned immediately back on after being switched off; this is called restrike time, and it can take up to 15 minutes before they can be turned on again. Attempting to power on the lights before the bulbs have cooled can damage a fixture’s components and cause the HID bulb to fail sooner.

HID lamps consist of a ballast and a quartz tube that contains gas, metal salts, and two tungsten electrodes. In order to create light, an electric arc passes from one electrode to the other through a gas (most commonly mercury, metal halide, or sodium). The mercury used in this process is dangerous if enough is inhaled or released into the environment. If an HID bulb bursts, all contents should be put into a sealed container or sealed bag and taken to a recycling center or hazardous waste facility. If HID fixtures are used indoors, wall packs and canopy lights, are used indoors, the possibility of ultraviolet (UV) radiation exposure should be taken into consideration. HID bulbs emit a substantial amount of UV radiation, but an outer glass envelope prevents the radiation from escaping. However—according to the FDA—”If the outer bulb breaks and the inner tube continues to operate unshielded, intense UV radiation is emitted. UV exposure at this level can cause eye and skin burns, as well as blurred or double vision, headaches, and nausea.” The UV light from an HID bulb with a broken envelope can also lead to discoloration of items and fabric. LEDs emit little to no UV radiation.

In short, LED lights are a better alternative to HID parking lot lights. They offer a great deal in the way of savings, longevity, maintenance reduction, brightness, color, and safety. While it may take a short amount of time to recoup the price of switching to LEDs, all of their qualities make it easy to see why so many businesses have started the process.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

At this time of the year, the weather in most parts of Australia is perfect to spend time in the outdoor spaces of your home. You can spend leisurely hours lounging around by the pool, or have BBQ parties in your outdoor kitchen, on the patio or deck. In short, you can make good use of these areas in the daytime as well as after dark.

This also means you will end up using some or the other electrical equipment and appliances there and this brings with it a specific set of challenges. In some cases, the falling dry leaves can also prove to be an electrical hazard in the outdoor areas of your home. The best way to avoid problems is to follow these basic outdoor electrical safety tips:

Just as you get the indoor electrical equipment and installations audited regularly, you should also hire an electrician to conduct a semi-annual audit of your garden and yard’s outdoor electrical fixtures. It’s best to get these checks done some time between Winter & Spring.

The next audit should be conducted between Summer & Fall. This helps reduce the chances of electrical problems surfacing out of the blue due and to temperature and weather fluctuations. While it’s best to call in a licensed and experienced electrician to handle the job, it’s also a good idea to keep an eye out for signs of electrical problems including:

When the electrical audit is being conducted, ensure that all your outdoor electrical equipment is stored & functioning properly.

Damaged or loose electrical wiring can prove to be a major electrical hazard and can be the cause of an electrical fire in your home; this is especially true if the wiring comes in contact with dry leaves or firewood that’s been piled up in the yard. Once the electrician gives you a complete report of the condition of the wiring, you should also make it a point to replace any wiring that’s loose or damaged.

Any water pooling in the landscaped areas of your home can prove to be an electrical hazard and can put your home and other outdoor features on your property at risk. The best way to prevent this from happening is to ensure that all the electrical switches, cords and connections are stored away and that they are in weather-proof casing; this ensures they don’t come in contact with any water sources.

Every pool and spa tub installation has some electrical wiring and fixtures such as pumps, underwater lights and power points etc. Ensure your electrician checks all these fixtures and that the electrical safety requirements have been met.

It’s a good idea to opt for a preventive electrical maintenance contract. As part of this contract, your electrician will check all the electrical installations in your yard and garden spaces. These checks help ensure that all these systems are in a good condition and that if any potential problems are noticed, they can be nipped in the bud.