On average, over 350,000 home fires take place every year, claiming thousands of lives. How are your smoke detectors functioning? Don't make these mistakes with your smoke detectors:

Make sure your smoke detectors are installed correctly The U.S. Fire Administration recommends installing alarms both inside and outside sleeping areas. At a minimum, alarms should be located on all levels of your home, at least one near each sleeping area and preferably additional detectors in pathways between sleeping areas and exits out of your home. If you sleep with your bedroom door closed, smoke or use heat-producing appliances in or near your bedroom, or have noisy appliances in your bedroom that could block the sound of a smoke detector (TVs, stereos, air conditioners, and more), it is especially important to install one inside each bedroom. Always use a licensed electrician when installing hardwired smoke alarms. Alarms should be installed:

Smoke detectors save lives. Don’t fall victim to these common smoke detector problems or behind today’s recommended standards for protection. Contact Mr. Electric® today to ensure the proper installation and operation of these life-saving safety devices in your home.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

analysis released by New York City Comptroller Scott Stringer, from 2003 to 2015, New York spent an average of $1.9 million per inch of snow. The city’s average annual cost over the past 14 years has been $95.5 million. One way to cut costs is to invest in LED snow plow lights. While it might cost more initially to replace halogen or incandescent bulbs with LEDs, the long-term payoff is worth it. LED snow plow lights can last 25 times longer than standard bulbs and fixtures, which means a significant reduction in maintenance and replacement costs.

LED snow plow lights are available in a wide variety of shapes, sizes, and styles. From beacons, first state to use green lights on their snow plows, and they have also started using multiple color combinations, including amber, green, and white. Saskatchewan, Manitoba, Ontario, Newfoundland, and the Yukon are using blue/amber combination lights to increase the visibility of their plows. All of these colors and color combinations are available in LED lights. The list below includes some of many LED lights that are perfect for snow plows in any part of the world.

If you’re not prepared for them, electrical repairs can be painful. And while certain things are obvious, sometimes it can be tricky to decide whether or not you need to call an electrician. Here are eight reasons people commonly call Kolb Electric:

Your circuits constantly trip – do your lights flicker every time you run the microwave? Can you not run more than a few electronic devices at a time? This may be a sign that your circuits are overloaded and are drawing more electrical current than they can provide. A heavy up should take care of the problem.

You have power strips everywhere – don’t have enough outlets? We can take care of that! Using too many power strips can overload your electrical system and can create a fairly serious fire risk. Call Kolb Electric to install additional circuits to keep your home safe.

You’re running extension cords under your carpets – running extension cords all over the house presents a couple different hazards. Not only are they easy to trip on, but they’re also not things you should be stepping on. Kolb Electric can install additional outlets so you’ll always have power where you need it.

Your light switches feel warm to the touch – warm or hot switches, or switches that shock you, should definitely be checked out. While it could mean your circuits are just overworked, it could also be a sign of something more dangerous.

You have aluminum wiring — according to the U.S. Consumer Product Safety Commission, homes built before 1972 that have aluminum wiring are 55 times more likely to create fire hazards than homes with copper wires.

Your lights flicker — do your lights seem to flicker or dim whenever your air conditioner, washing machine, or other large electrical device turns on? If so, call Kolb Electric! Our licensed electricians will assess your home’s circuits and make improvements to prevent these problems from continuing in the future.

You own a number of expensive electronics — you may already have surge protectors to take care of your expensive desktop computer or stereo system, did you know that an electrician can install a whole-house surge protection unit to make sure that all of your electronics are safe? Consider calling an expert and feel safe and sound at home.

You’ve never upgraded — if it’s been 25 years or more since you upgraded  your home’s electrical system, then you may be living with a sub-par one. Call an electrician so he or she can help move you into the modern era with a new system that will be more accommodating to the needs of today’s world.

If you need electrical troubleshooting in Maryland, Virginia, or Washington, DC, don’t wait—call Kolb Electric today!