Through the work week between the hours of 9 to 5, many mega watts of electricity is fed into offices and commercial buildings all over the world. These are places where productivity is vital and electricity is critical for the productivity to exist. Whether renting, leasing, or own an office building, here is a checklist of items for consideration that will improve the efficiency of electricity running throughout the office

Some office buildings can have hundreds of workstations on each floor. Each workstation can include monitors, computers, printers and other electronic devices. A bad situation develops when there are insufficient numbers of power outlets, and the only solution is to add and chain extension cables. Often this can lead to overloading the electrical circuits, damage electronics and create a risk of electrocution. If you find that there are not enough power outlets for your workspaces, have a licenced electrician inspect the office space and install new ones. A professional will be able to determine how much load can go on each circuit without causing strain on the circuit breaker.

If the workspace lighting is inadequate, workers may find it straining on their eyes and can ultimately create an unwelcoming work environment. Through proper lighting design the office space can become more efficient and pleasant to work in. Upgrading your light fixtures with more efficient bulbs can lead to better lighting and lower electrical costs each month.

An office building should also be equipped with the appropriate outdoor lighting. This will improve building safety by providing lighting at building entry points, but also keep employees feeling safe while exiting the building during the night. Read more about office lighting.

The worst thing that can happen for productivity is an electrical outage. Without the use of computers and printers, an electrical outage can bring a business to its knees. Equipping an office building with a backup generator adds a layer of protection against these types of situations. As soon as power stops flowing to the building, the generator will activate and continue providing power to workstations. This is helpful to prevent loss of work and provide some extra hours of productivity. While your office still may remain without internet services, the extra time can be used well to finish up tasks and plan for any additional power outages. Read more about standby generators.

Whether you are in charge of a building, or your own office’s workspace, make sure that your building is running safely and efficiently. Investing in the right lighting and generator can be a wise investment to keep productivity up in the long dark hours of the winter. For more information on office electrical or to schedule an inspection from one of our licensed electricians, contact your local Expert Electric.

The home electrical system consists of various components that enable the safe delivery of energy to different sections and appliances in the household. Even though the system may appear complex, it is important for the homeowner to understand a few basics.

This would help you when things do not work or there is an emergency that requires turning off circuits or the entire installation. In addition, an understanding of the home electrical system will help the owner respond to questions from prospective buyers.

All the electrical circuits in the house originate from the main breaker panel. The panel is usually inside the house and near to the power entry point. However, the panel can also be far, and especially when in a multi-family structure.

The rating of the panel determines the number of circuits and power that the home electrical system can support. Some older homes have been using the 100 Amp service, smaller installations use a 60 Amp service while newer and larger houses are built with 200 amps to accommodate the increased number of electrical and electronic equipment commonly used in a modern household.

Different loads require the correct size of cables and breakers that can handle the current without heating up. For example, an air conditioner requires a 30 amp circuit while a kitchen may use two 20 amp circuits.

If there is a fault, such as a short circuit or overload, the breaker trips and cuts off the power to the affected circuit, hence preventing further damage that could lead to fire. Before resetting the breaker, you should first ask an electrician to check and rectify the problem.

A home electrical system consists of different individual circuits originating from the main breaker panel. The wires from the panel run to the rooms to supply the outlets, lights, and hand wired appliances. In most cases, several rooms may share the same circuits such that all the lights in the house are on one breaker, outlets on another breaker, etc.

Some dedicated circuits from the main breaker may go directly to the hard-wired appliances and nowhere else. Equipment such as the electric water heaters, furnaces, and air conditioners are usually installed on their own. Other hard-wired devices include the smoke alarms, which may also have battery backups so they will work even when there is a power outage or a fire interrupts the home electrical system.

Grounding is an essential protective feature that must be installed in all home electrical systems. It provides a path for the electrical current arising from faults that make the exposed metallic parts to become live and dangerous.

The ground connects all the exposed metallic parts to the earth mass through a third wire in the power cord to the equipment. This provides a low electrical resistance path for the current, hence, making the parts safe to the touch even in the event of a malfunction.

maintenance and repairs.

An Indoor Generator™ is a backup power system that is delivered to you fully charged.  The charge is held in the unit’s batteries, which will be available for immediate use the moment you need it.  Everything that requires power from wall outlets will lose its power in the case of an outage.  You can either be left without power or you can implement your home back up power system to stay up and running without worry.

A unit like this is important for people who live in areas where outages and power surges are common.  Even if these occurrences are rare, maintaining power through an outage will provide safety and value in the event that you do lose power.  Also, if you live in a condo or high-rise where gas generators are not allowed, you can still use a battery-powered unit like the Indoor Generator.  Finally, if you have valuable computer or medical equipment, a power outage or surge could destroy them.  Thankfully, an Indoor Generator can prevent this.

Here are the reasons to hire a Dallas electrician for your backup power system installation:

In order to get the most out of your investment, you will want only the most reputable Dallas and Plano Electrician on the job.  Click on the link to find out about one near you.